PET composites and their applications in the face of green chemistry challenges – an overview

• Autorzy: Ostrowski Krzysztof Adam , Spyrowski Mariusz , Romańska Paulina , Majka Tomasz M. , Piech Radosław , Zawadzka Zuzanna , Furtak Kazimierz , Bednarowski Dariusz

Identyfikatory

DOI

10.14314/polimery.2025.4.1

Warianty tytułu

PL

Kompozyty PET i ich zastosowanie w obliczu wyzwań zielonej chemii - przegląd literaturowy

• Języki publikacji: EN

Abstrakty

EN

The review discusses the recycling of PET packaging, highlighting its significance in the circular economy. It presents methods for processing the recovered material and its potential applications in various sectors of the economy. The importance of the 6R principle in integrating the economy and promoting sustainable development is also emphasized.

PL

W artykule omówiono recykling opakowań PET, podkreślając jego znaczenie w gospodarce obiegu zamkniętego. Przedstawiono metody przetwórstwa odzyskanego materiału i jego potencjalne zastosowania w różnych sektorach gospodarki. Wykazano znaczenie zasady 6R w integracji gospodarki i promowaniu zrównoważonego rozwoju.

Słowa kluczowe

EN

recycling; green chemistry; circular economy; composites; PET

PL

recykling; zielona chemia; gospodarka obiegu zamkniętego; kompozyty; PET

• Wydawca: Sieć Badawcza Łukasiewicz – Instytut Chemii Przemysłowej
• Czasopismo: Polimery
• Rocznik: 2025
• Tom: Vol. 70, nr 4
• Strony: 227--239
• Opis fizyczny: Bibliogr. 86 poz., rys., tab., wykr.

Twórcy

autor

Ostrowski Krzysztof Adam

• Cracow University of Technology, Faculty of Civil Engineering, ul. Warszawska 24, 31-155 Kraków, Poland

• https://orcid.org/0000-0001-5047-5862

autor

Spyrowski Mariusz

• Cracow University of Technology, CUT Doctoral School, Faculty of Civil Engineering, ul. Warszawska 24, 31-155 Kraków, Poland

• https://orcid.org/0009-0009-4260-4068

autor

Romańska Paulina

• Cracow University of Technology, Interdisciplinary Center for Circular Economy, ul. Warszawska 24, 31-155 Kraków, Poland
• Cracow University of Technology, Faculty of Mechanical Engineering, Al. Jana Pawła II 37, 31-864 Kraków, Poland

• https://orcid.org/0000-0002-7133-8522

autor

Majka Tomasz M.

• Cracow University of Technology, Interdisciplinary Center for Circular Economy, ul. Warszawska 24, 31-155 Kraków, Poland
• Cracow University of Technology, Faculty of Chemical Engineering and Technology, Department of Chemistry and Technology of Polymers, ul. Warszawska 24, 31-155 Kraków, Poland

• https://orcid.org/0000-0002-7913-0750

autor

Piech Radosław

• Cracow University of Technology, Interdisciplinary Center for Circular Economy, ul. Warszawska 24, 31-155 Kraków, Poland
• Cracow University of Technology, CUT Doctoral School, Faculty of Chemical Engineering and Technology, ul. Warszawska 24, 31-155 Kraków, Poland

autor

Zawadzka Zuzanna

• Cracow University of Technology, Faculty of Chemical Engineering and Technology, Department of Chemistry and Technology of Polymers, ul. Warszawska 24, 31-155 Kraków, Poland

autor

Furtak Kazimierz

• Cracow University of Technology, Faculty of Civil Engineering, ul. Warszawska 24, 31-155 Kraków, Poland

autor

Bednarowski Dariusz

• Cracow University of Technology, CUT Doctoral School, Faculty of Material Engineering and Physics, Al. Jana Pawła II 37, 31- 864 Kraków, Poland
• ABB Corporate Technology Center, ul. Starowiślna 13A, 31-038 Kraków, Poland

• https://orcid.org/0000-0002-2717-0670

Bibliografia

• [1] Li Z., Yang M.B., Huang R. et al.: Polymer-Plastic Technology and Engineering 2002, 41(1), 19. https://doi.org/10.1081/PPT-120002057
• [2] Xiao B., Zheng M., Pang J. et al.: Industrial and Engineering Chemistry Research 2015, 54(22), 5862. https://doi.org/10.1021/acs.iecr.5b00487
• [3] Bhattarai B., Kusano Y., Cederberg T.L. et al.: European Food Research and Technology 2024, 250, 533. https://doi.org/10.1007/s00217-023-04400-z
• [4] https://plasticseurope.org/knowledge-hub/plastics-the-facts-2022/ (access date 27.11.2024)
• [5] https://www.oecd.org/en/publications/global-plastics-outlook_aa1edf33-en.html (access date 20.08.2024)
• [6] Frounchi M.: Macromolecular Symposia 1999, 144, 465. https://doi.org/10.1002/masy.19991440142
• [7] Park S.H., Kim S.H.: Fashion and Textiles 2014, 1, 1. https://doi.org/10.1186/s40691-014-0001-x
• [8] Sinha V., Patel M.R., Patel J.V.: Journal of Polymers and the Environment 2010, 18, 8. https://doi.org/10.1007/s10924-008-0106-7
• [9] Allen D., Spoelman N., Linsley C. et al.: “The Fraud of Plastic Recycling How Big Oil and the plastics industry deceived the public for decades and caused the plastic waste crisis”, Center for The Climate Integrity, Washington DC 2024.
• [10] Koo H.J., Chang G.S., Kim S.H. et al.: Fibers and Polymers 2013, 14, 2083. https://doi.org/10.1007/s12221-013-2083-2
• [11] Welle F.: Resources, Conservation and Recycling 2011, 55(11), 865. https://doi.org/10.1016/j.resconrec.2011.04.009
• [12] Zhao X., Zhan L., Xie B. et al.: Chemosphere 2018, 207, 742. https://doi.org/10.1016/j.chemosphere.2018.05.156
• [13] Nait-Ali L.K., Colin X., Bergeret A.: Polymer Degradation and Stability 2011, 96(2), 236. https://doi.org/10.1016/j.polymdegradstab.2010.11.004
• [14] Lee J.H., Lim K.S., Hahm W.G. et al.: Journal of Applied Polymer Science 2013, 128(2), 1250. https://doi.org/10.1002/app.38502
• [15] Scelsi L., Hodzic A., Soutis C. et al.: Plastics, Rubber and Composites 2011, 40(1), 1–10. https://doi.org/10.1179/174328911X12940139029121
• [16] Mondadori N.M.L., Nunes R.C.R., Canto L.B. et al.: Journal of Thermoplastic Composite Materials 2012, 25(6), 747. https://doi.org/10.1177/0892705711412816
• [17] Kráčalík M., Pospíšil L., Šlouf M. et al.: Polymer Composites 2008, 29(8), 915. https://doi.org/10.1002/pc.20467
• [18] Monti M., Scrivani M.T., Kociolek I. et al.: Polymers 2021, 13(9), 1471. https://doi.org/10.3390/polym13091471
• [19] Giraldi A.L.F.D.M., Bartoli J.R., Velasco J.I. et al.: Polymer Testing 2005, 24(4), 507. https://doi.org/10.1016/j.polymertesting.2004.11.011
• [20] Albini G., Brunella V., Placenza B. et al.: Journal of Industrial Textiles 2019, 48(6), 992. https://doi.org/10.1177/1528083717750887
• [21] Atakan R., Sezer S., Karakas H.: Journal of Industrial Textiles 2020, 49(7), 835. https://doi.org/10.1177/1528083718798637
• [22] Lin C.C.: Macromolecular Symposia 1998, 135(1), 129. https://doi.org/10.1002/masy.19981350115
• [23] Barthélémy E., Spyropoulos D., Milana M.R. et al.: Food Additives and Contaminants: Part A 2014, 31(3), 490. https://doi.org/10.1080/19440049.2013.871755
• [24] Franz R., Welle F.: Molecules 2020, 25(21), 4998. https://doi.org/10.3390/molecules25214998
• [25] Tsochatzis E.D., Lopes J.A., Corredig M.: Resources, Conservation and Recycling 2022, 179, 106096. https://doi.org/10.1016/j.resconrec.2021.106096
• [26] Albiter N.L., Santana Pérez O., Klotz M. et al.: Polymers 2022, 14(21), 4639. https://doi.org/10.3390/polym14214639
• [27] Benyathiar P., Kumar P., Carpenter G. et al.: Polymers 2022, 14(12), 2366. https://doi.org/10.3390/polym14122366
• [28] Perron B.E., Victor B.G., Hodge D.R. et al.: Research on Social Work Practice 2017, 27(7), 802. https://doi.org/10.1177/1049731515624966
• [29] Zitt M., Bassecoulard E.: Ethics in Science and Environmental Politics 2008, 8, 49. https://doi.org/10.3354/ESEP00092
• [30] Singh V.K., Banshal S.K., Singhal K. et al.: Scientometrics 2015, 105, 727. https://doi.org/10.1007/s11192-015-1729-9
• [31] Gile D.: Perspectives 2015, 23(2), 240. https://doi.org/10.1080/0907676X.2014.972418
• [32] Falagas M.E., Pitsouni E.I., Malietzis G.A. et al.: The FASEB Journal 2007, 22(2), 338. https://doi.org/10.1096/fj.07-9492LSF
• [33] Vieira E.S., Gomes J.A.N.F.: Scientometrics 2009, 81, 587. https://doi.org/10.1007/s11192-009-2178-0
• [34] https://www.vosviewer.com/ (access date 18.11.2024).
• [35] Karayannidis G.P., Kokkalas D.E., Bikiaris D.N.: Journal of Applied Polymer Science 1995, 56(3), 405. https://doi.org/10.1002/app.1995.070560311
• [36] Borisov V.A., Mikitaev A.K., Beeva D.A. et al.: European Journal of Analytical and Applied Chemistry 2015, 1, 7.
• [37] Zhao J., Xiao H., Qiu G. et al.: Polymer 2005, 46(18), 7309. https://doi.org/10.1016/j.polymer.2005.05.090
• [38] Yashas Gowda T.G., Sanjay M.R., Subrahmanya Bhat K. et al.: Cogent Engineering 2018, 5(1), 1446667. https://doi.org/10.1080/23311916.2018.1446667
• [39] Zakaria Z., Osman H., Rahim N.A.A. et al.: “Recycled Polyethylene Terephthalate Blends and Composites: Impact of PET Waste, Engineering Design, and Their Applications” in “Recycled Polymer Blends and Composites” (edit. Ismail H., Sapuan S.M., Ilyas R.A.), Springer International Publishing, Cham 2023. p. 417. https://doi.org/10.1007/978-3-031-37046-5_21
• [40] Molnar B., Ronkay F.: Polymer Bulletin 2019, 76, 2387. https://doi.org/10.1007/s00289-018-2504-x
• [41] Pichler T.: “PET-Recycling/Upcycling with the new LSP-Process (Liquid State Polycondensation)”. Materials from 12th Annual CARE Conference, Seattle, WA, USA, May 6-8, 2014.
• [42] Chen K., Liu Y., Ji H. et al.: The Journal of The Textile Institute 2021, 112(5), 727. https://doi.org/10.1080/00405000.2020.1777623
• [43] Yang Q., Hou Z., Huang T. et al.: Journal of Applied Polymer Science 2014, 132(11), 41615. https://doi.org/10.1002/app.41615
• [44] Nasir N.H.M., Usman F., Woen E.L. et al.: Construction and Building Materials 2024, 447, 138130. https://doi.org/10.1016/j.conbuildmat.2024.138130
• [45] Gradinaru L.M., Mandru M.B., Drobota M. et al.: Polymers 2021, 13(24), 4316. https://doi.org/10.3390/polym13244316
• [46] de M. Grinaldi A.L.F., Bartoli J.R., Velasco J.I. et al.: Polymer Testing 2005, 24(4), 507. https://doi.org/10.1016/j.polymertesting.2004.11.011
• [47] Cavalcanti D.K.K., Banea M.D., Neto J.S.S. et al.: Journal of Composite Materials 2020, 55(12), 1683. https://doi.org/10.1177/0021998320976811
• [48] Matsuo T.: Textile Progress 2008, 40, 87. https://doi.org/10.1080/00405160802133028
• [49] Hamdy T.M.: BMC Oral Health 2024, 24, 739. https://doi.org/10.1186/s12903-024-04447-8
• [50] Zahedi P., Arefazar A.: Journal of Applied Polymer Science 2007, 107(5), 2917. https://doi.org/10.1002/app.27360
• [51] Qiao L., Yan X., Tan H. et al.: Polymers 2022, 14(14), 2892. https://doi.org/10.3390/polym14142892
• [52] Guo F., Aryana S., Han Y. et al.: Applied Sciences 2018, 8(9), 1696. https://doi.org/10.3390/app8091696
• [53] Jang J.Y., Sadeghi K., Seo J.: Polymer Reviews 2002, 62(4), 860. https://doi.org/10.1080/15583724.2022.2033765
• [54] Karthik G., Balaji K.V., Venkateshwara R. et al.: SAE Technical Paper 2015, 2015-01-1304. https://doi.org/10.4271/2015-01-1304
• [55] Coltelli M.B., Bianchi S., Savi S. et al.: “Post-consumer poly(ethylene terephthalate) in composites and blends for automotive applications” Materials from ICCM 17, Edinbourgh, UK, July 27-31, 2009.
• [56] Sulyman M., Haponiuk J., Formela K.: International Journal of Environmental Science and Development 2016, 7(2), 100. https://doi.org/10.7763/IJESD.2016.V7.749
• [57] Pat. Pol. 2 437 14 (2019)
• [58] Pat. Pol. 2 437 13 (2019)
• [59] Dodds N., Gibson A.G., Huang Y.H. et al.: Plastics, Rubber and Composites 2005, 34(7), 324. https://doi.org/10.1179/174328905X59764
• [60] Kim S.B., Yi N.H., Kim H.Y. et al.: Cement and Concrete Composites 2010, 32(3), 232. https://doi.org/10.1016/j.cemconcomp.2009.11.002
• [61] Fraternali F., Ciancia V., Chechile R. et al.: Composites Structures 2011, 93(9), 2368. https://doi.org/10.1016/j.compstruct.2011.03.025
• [62] Patnaik A., Mvubu M., Muniyasamy S. et al.: Energy and Buildings 2015, 92, 161. https://doi.org/10.1016/j.enbuild.2015.01.056
• [63] Ronkay F., Molnár B., Szalay F. et al.: Polymers 2019, 11(2), 233. https://doi.org/10.3390/polym11020233
• [64] Ochi T., Okubo S., Fukui K.: Cement and Concrete Composites 2007, 29(6), 448. https://doi.org/10.1016/j.cemconcomp.2007.02.002
• [65] https://www.xometry.com/resources/3d-printing/ pet-3d-printing-filament/ (access date 4.12.2024)
• [66] https://www.plasticsrecyclers.eu/wp-content/ uploads/2024/05/PET-Market-in-Europe-State-of-Play-2022-Data-V3.pdf (access date 9.12.2024)
• [67] https://plasticseurope.org/changingplasticsforgood/ the-plastics-transition/ (access date 9.12.2024)
• [68] https://www.eea.europa.eu/publications/the-role-of-plastics-in-europe (access date 9.12.2024)
• [69] https://www.epa.gov/warm/documentation-waste-reduction-model-warm (access date 9.12.2024)
• [70] Zhao J., Ma X., Guo J. et al.: IOP Conference Series: Earth and Environmental Science 2018, 189, 052002. https://doi.org/10.1088/1755-1315/189/5/052002
• [71] https://www.iea.org/reports/the-future-of-petro¬chemicals (access date 4.12.2024)
• [72] Prata J.C., da Costa J.P., Lopes I. et al.: Science of The Total Environment 2019, 702, 134455. https://doi.org/10.1016/j.scitotenv.2019.134455
• [73] Senathirajah K., Attwood S., Bhagwat G. et al.: Journal of Hazardous Materials 2021, 404(B), 124004. https://doi.org/10.1016/j.jhazmat.2020.124004
• [74] Mierzejewski K., Kurzyńska A., Golubska M. et al.: Science of The Total Environment 2023, 904, 166967. https://doi.org/10.1016/j.scitotenv.2023.166967
• [75] https://www.epa.gov/water-research/microplastics-research (access date 4.12.2024)
• [76] Liang B., Zhong Y., Huang Y. et al.: Particle and Fibre Toxicology 2021, 18, 20. https://doi.org/10.1186/s12989-021-00414-1
• [77] Wang Q., Yao X., Geng Y. et al.: Green Chemistry 2015, 17, 2473. https://doi.org/10.1039/C4GC02401J
• [78] de Paula V., Pandeirada S.V., Ribeiro-Claro P.J.A. et al.: ACS Sustainable Chemistry and Engineering 2025, 13(9), 3577. https://doi.org/10.1021/acssuschemeng.4c09545
• [79] Paparella A.N., Perrone S., Salomone A. et al.: Catalysts 2023, 13(7), 1035. https://doi.org/10.3390/catal13071035
• [80] Rollo M., Raffi F., Rossi E. et al.: Chemical Engineering Journal 2023, 456, 141092. https://doi.org/10.1016/J.CEJ.2022.141092
• [81] Attallah O.A., Azeem M., Nikolaivits E. et al.: Polymers 2022, 14(1), 109. https://doi.org/10.3390/polym14010109
• [82] Attallah O.A., Janssens A., Azeem M. et al.: ACS Sustainable Chemistry and Engineering 2021, 9(50), 17174. https://doi.org/10.1021/acssuschemeng.1c07159
• [83] Choi S., Choi H.M.: Fibers and Polymers 2019, 20, 752. https://doi.org/10.1007/s12221-019-8931-y
• [84] Rollo M., Raffi F., Rossi E. et al.: SSRN Electronic Journal 2022. https://doi.org/10.2139/SSRN.4272637
• [85] Kaewmahit K., Ruengrit N., Deetuam C. et al.: Journal of Polymer Science and Engineering 2023, 6(1), 3040. https://doi.org/10.24294/jpse.v6i1.3040
• [86] Yoshida S., Hiraga K., Takehana T. et al.: Science 2016, 351(6278), 1196. https://doi.org/10.1126/science.aad6359