Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 16

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  SPME
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
The aim of this study was to determine the effect of the addition of extractive substances on the VOC emission of lacquer products in the liquid state. Three water-soluble acrylic resin products were investigated using the stationary phase microextraction technique in combination with gas chromatography coupled with mass spectrometry (SPME-GC/MS). The extraction of volatile compounds was analysed at three temperatures: 22 ℃, 35 ℃ and 45 ℃. 20 μg of an extract obtained from the leaves, branches and bark of black cherry (Prunus serotina Erhr.) were added to commercial products. Flavonoids accounted for almost 75% of the total phenols in the used extract. The spectrum of volatile compounds emitted by the liquid coating products selected for the studies was examined before and after adding the extract to them. It was found that the addition of black cherry extract caused a significant reduction in the emissions of volatile compounds emitted by the researched products. The compounds, whose amounts did not decrease under the influence of the addition of the extract, were esters of propenoic acid. The applied extract was a source of emissions from an additional compound: benzaldehyde. The total VOC emissions of the investigated liquid coating products was reduced by 8-55% and depended on the extraction temperature. The paper also proposes the mechanism of chemical reactions between phenolics and VOC, which may cause the reduction in VOC emissions from lacquer products. The IBM RXN tool was utilised to find possible reactions.
EN
The paper presents results of the analysis of the volatile compounds arising from the production processes in a brewery. The investigated material comprised the unhoped brewer’s wort which was taken from the fermentation tanks during the industrial process. The identification of volatile compounds was conducted with the use of Solid-Phase MicroExtraction (SPME) technique by extracting the compounds from the headspace of the brewer’s wort (HS-SPME). The procedure was optimized by modifying the parameters potentially influencing the process efficiency. The analytes adsorbed on the fibers were subsequently placed in the injector of a gas chromatograph, where they were released in the course of thermal desorption. Three types of fibers were chosen for the experiments: 65 μm PDMS/DVB, 50/30 μm DVB/CAR/PDMS and 100 μm PDMS. The greatest number of peaks corresponding to compounds found in the examined material was observed on the 50/30 μm DVB/CAR/PDMS fiber while the lowest was identified on the 100 μm PDMS fiber. The detected compounds are mainly the derivatives of aliphatic, alicyclic and aromatic hydrocarbons with different functional groups e.g. carbonyl, aldehyde or ester and possessing O-heteroatom in their structure.
PL
W pracy przedstawiono wyniki analizy lotnych związków powstających w trakcie procesów produkcyjnych w browarze. Materiałem pobieranym do badań była brzeczka przednia (niechmielona) otrzymywana po procesie filtracji w kadzi filtracyjnej. Identyfikacji lotnych składników dokonano z wykorzystaniem techniki mikroekstrakcji do fazy stacjonarnej (SPME), ekstrahując związki z fazy nadpowierzchniowej brzeczki piwnej. Procedurę optymalizowano, modyfikując parametry potencjalnie wpływające na efektywność procesu. Zaadsorbowane na włóknie anality umieszczano następnie w dozowniku chromatografu gazowego, gdzie w wyniku termicznej desorpcji następowało ich uwalnianie. Do badań wytypowano trzy rodzaje włókien: 65 mm PDMS/DVB, 50/30 mm DVB/CAR/PDMS oraz 100 mm PDMS. Największą ilość związków zidentyfikowano na podstawie analizy włókna o bipolarnej fazie stacjonarnej 50/30 mm DVB/CAR/PDMS, natomiast najmniejszą przy użyciu włókna 100 mm PDMS. Zidentyfikowano w sumie kilkadziesiąt związków będących pochodnymi węglowodorów alifatycznych, alicyklicznych i aromatycznych, posiadających różne grupy funkcyjne, takie jak karbonylowa, aldehydowa, estrowa, oraz zawierających w swej strukturze heteroatom tlenu.
EN
An analytical method for simultaneous determination of 24 legislatively restricted fragrance allergens in various cosmetic products was developed and validated using a combination of solid-phase microextraction and gas chromatography with flame ionization detector. The divinylbenzene-polydimethylsiloxane (DVB-PDMS) fiber was evaluated as the best for extraction of all studied fragrance allergens at 40 °C and 20 min extraction time. All calibration curves showed good linearity in the range of 10-1 to 103 μg Ml-1. Good repeatability and inter-day precision was determined for the proposed method. Detection limits for individual allergens ranged from 0.007 to 2.7 μg Ml-1. The validated method was used to analyze real cosmetic samples. The obtained results indicated that not all of the analyzed cosmetic samples were labeled in accordance with European Cosmetic Directive.
PL
SPME ze wzglądu na swoje liczne zalety, między innymi wysoki współczynnik zagęszczenia analitu, możliwości przeprowadzenia wydzielania zarówno z fazy ciekłej, jak i gazowej, szybkość i prostotę metody, jest stosowane w analizie próbek środowiskowych oraz biologicznych. Można ją łatwo łączyć z róznymi instrumentalnymi technikami rozdzielania.
PL
Włókna pokryte polimerowymi cieczami jonowymi stanowią nową klasę wysokowydajnych i selektywnych sorbentów mających różnorodne zastosowanie.
PL
Omówione w niniejszym opracowaniu rozwiązania metodyczne i aparaturowe w większym stopniu odpowiadają wymogom zielonej chemii analitycznej. Z dużą dozą można stwierdzić, iż rozwój i postęp technologiczny sprawią, iż wkrótce będą one rutynowo wykorzystywane na bardzo szeroką skalę.
PL
W pracy przedstawiono porównanie metody ekstrakcji do fazy stacjonarnej i GC-MS w zastosowaniu do oznaczania związków odorowych emitowanych w zakładach przemysłu spożywczego. Wykazano przydatność metody SPME w tym zastosowaniu i określono zakres jej przewagi nad metodą GC-MS.
EN
In the paper comparison of methods: solid phase micro extraction (SPME) and GC-MS is presented in the application to odour compounds analysis, emitted from food industry enterprises. It was shown applicability of SPME method and conditions of its superiority over GC-MS in this application.
PL
Przedstawiono skuteczność zamykania w maltodekstrynie aromatu rozmarynowego i cytrynowego w procesie suszenia rozpyłowego. Najlepsze zamknięcie aromatu rozmarynowego (ok. 40%) otrzymano przy najwyższej szybkości podawania surowca i temperaturze powietrza wlotowego 200st.C. Skuteczność zamykania aromatu cytrynowego nie przekraczała 1%. Nie stwierdzono zależności pomiędzy właściwościami proszków a ilością zamkniętych aromatów.
EN
An efficiency of microencapsulation of rosemary and lemon oil in maltodextrin during spray drying was evaluated. The best retention of rosemary oil (ca 40% ) was received at the greatest feed rate and inlet air temperature of 200°C. The amount of encapsulated lemon aroma did not exceed 1%. No relationship between powders' physical properties and aroma encapsulation efficiency was stated.
PL
W artykule przedstawiono wyniki badań zamykania olejku rozmarynowego w trakcie suszenia rozpyłowego w mikrokapsułce z maltodekstryny. Zastosowano dodatek olejku rozmarynowego w ilości 0,5 oraz 1 ml na 100 g roztworu. Stosowano temperaturę powietrza wlotowego 200oC oraz trzy strumienie surowca. Stwierdzono, iż najlepsze wyniki zamknięcia związków aromatycznych otrzymuje się przy wyższym dodatku aromatu do roztworu. Jednak ubytek tych związków w trakcie suszenia rozpyłowego nie jest proporcjonalny do dwukrotnie większego dodatku aromatu. Mikrokapsułkowaniu aromatów sprzyja także mniejsza zawartość wody w proszkach, mniejsza gęstość nasypowa luźna oraz większa porowatość złoża.
EN
The microencapsulation of rosemary oil in the maltodextrin during spray drying research results were the subject of the work. One inlet air temperatures and three raw material flux were applied. It was found that the best results of microencapsulation were received for higher addition of aroma to raw material flux. However, the amount of microencapsulated compounds loss during spray drying was not proportional to aroma addition, what was twice bigger in mass. Smaller water content, smaller loosed bulk density and bigger bed porosity helped aroma microencapsulation.
PL
W pracy przedstawiono aspekty teoretyczne i praktyczne techniki mikroekstrakcji do fazy stacjonarnej (SPME). Z uwagi na swoje liczne zalety metoda ta jest przez analityków coraz częściej stosowana. Stosuje się ją zarówno do analizy próbek środowiskowych (powietrze, woda, gleba) jak i w analizie żywności i materiałów bilogicznych. Jej wysoka precyzja, prostota i mała czaso- i pracochłonność jest powodem zalecania przez autorów tej pracy do wprowadzania techniki SPME w życie.
EN
In recent years, much attention in analytical chemistry has been paid to sample preparation techniques, especially those which minimize the consumption of organic solvents. One on the most promising of these, solid phase microextraction (SPME), is presented in both its theoretical and practical aspects. SPME is a fast, solventless alternative to conventional sample extraction techniques. SPME greatly reduces analysis time and improves minimum detection limits, while maintaining resolution. SPME integrates sampling, extraction, concentration and sample introduction into a single solvent-free step. Analytes in the sample are directly extracted and concentrated to the extraction fibre. The method saves preparation time and disposal costs and can improve detection limits. It has been routinely used in combination with gas chromatography (GC) and GC/mass spectrometry (GC/MS) and successfully applied to a wide variety of compounds, especially for the extraction of volatile and semi-volatile organic compounds from environmental, biological and food samples. By controlling the polarity and thickness of the coating on the fiber, maintaining consistent sampling time, and adjusting several other extraction parameters, an analyst can ensure highly consistent, quantifiable results from low concentrations of analytes.
PL
Wywiad z prof. Januszem Pawliszynem. Janusz Pawliszyn - twórca techniki SPME (mikroekstrakcji do fazy stacjonarnej), profesor na Wydziale Chemii Uniwersytetu Waterloo, Kanada. Autor ponad 300 publikacji i trzech książek. Członek Chemical Institute of Canada, członek komitetów redakcyjnych "Journal of Separation Science", "Analyst", "Trends in analytical chemistry" i "Chemia analityczna". Laureat między innymi następujących nagród: McBryde Medal (1996), the 1996 Hyphenated Techniques in Chromatography Award, Caledon Award (1996), the Jubilee Medal 1998 - Chromatographic Society, UK, 2000 Maxxam Award, Humboldt Research Award (2001), COLACRO Medal (2002), Canada Research Chair (2003).
PL
Przedstawiono studium literaturowe dotyczące zastosowania techniki SPME, jako metody izolacji i wzbogacania zanieczyszczeń, związków zapachowych i smakowych oraz dodatków funkcjonalnych z próbek żywności. Przedstawiono czynniki wpływające na efektywność procesu mikroekstrakcji do fazy stacjonarnej, wybrane chromatogramy obrazujące ten wpływ oraz tabelaryczne zestawienie przykładów zastosowań SPME do badań żywości.
EN
The application of solid phase microextraction for isolation and preconcentration of impurities, food additives, food constituents and flavors in food samples is reviewed. The main parameters affecting the extraction effectiveness are discussed and exemplified by selected chromatograms. The examples of SPME applications for different food matrices are presented in table.
PL
W ostatnich latach do walki ze szkodnikami lasów, sadów i upraw rolnych na coraz większą skalę wykorzystuje się syntetyczne feromony, czyli związki chemiczne wydzielane przez owady w celu przekazania określonej informacji innym osobnikom tego samego gatunku.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.