PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

3D printing technology as a tool in fabrication of elements for wheel model

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This paper illustrates an experience related to the use of 3D printing technology during the fabrication of elements for a supporting arm. The arm was a part of a test stand designed for an investigation of rotating wheels in contact with the ground. One of the crucial elements of a supporting arm is the hub, which was originally made from aluminium, however it was decided to replace it by the one made from ABS using 3D printing technology. The author decided to describe difficulties encountered during fabrication of the hub, together with a set of recommendations for future use of 3D printers.
Twórcy
  • Institute of Turbomachinery, Lodz University of Technology 90-924 Łódź, 219/223 Wólczańska Street
Bibliografia
  • [1] J. Piechna, Podstawy aerodynamiki pojazdów (Basics of vehicle aerodynamics), WKŁ, Warsaw, 2000
  • [2] Materials from PSA Peugeot Citroën (internal use)
  • [3] J. Kopka, Design of an experimental stand for tests of tyre aerodynamics, BSc Diploma Thesis, Lodz University of Technology, 2014
  • [4] M. Kulak et al., Numerical and experimental analysis of rotating wheel in contact with the ground, 52nd 3AF International Conference on Applied Aerodynamics, FP17-AERO2017, 2017
  • [5] P. Pietrzak, Construction of the measuring arm for the experimental stand in a wind tunnel facility, BSc Diploma Thesis, Lodz University of Technology, 2016
  • [6] https://zortrax.com/wp-content/uploads/2015/05/Z-ABS_Material_Data_Sheet_eng-1.pdf (Z-ABS material Data Sheet, last accessed: 16.08.2017)
  • [7] P. Sieminski, G. Budzik, Techniki przyrostowe. Druk 3D. Drukarki 3D (Additive manufacturing, 3D printing, 3D printers), Warsaw University of Technology, Warsaw 2015
  • [8] L. Novakova-Marcincinova, J. Novak-Marcincin, Testing of materials for rapid prototyping fused deposition modelling technology, World Academy of Science, Engineering and Technology, vol. 6, 2012
  • [9] https://all3dp.com/app/uploads/2015/02/zortrax-m200-Data.png (Zortrax M200 3D printer dimensions, last accessed: 16.08.2017)
  • [10] B.S. Raju, U. Chanderashekar, D.N. Drakshayani, K. Chockalingam, Determining the influence of layer thickness for rapid prototyping with steroelithography (SLA) process, International Journal of Engineering Science and Technology, vol. 2, 2010
  • [11] K. Olasek, P. Wiklak, Application of 3D printing technology in aerodynamic study, Journal of Physics Conference Series, vol. 530, 2014
  • [12] B. Hoogterp, Realizing an experimental setup for the research of rotating wheel aerodynamic, BSc Diploma Thesis, Erasmus Final Project, Lodz University of Technology, 2016
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-42ea2c62-5c90-430c-9895-ed141f1cd1cd
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.