Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 158

Liczba wyników na stronie
first rewind previous Strona / 8 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  harmonics
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 8 next fast forward last
PL
W artykule opisano wpływ odkształconych przebiegów prądów i napięć na pracę urządzeń zainstalowanych w SEE. Przedstawiono transformator jako źródło harmonicznych prądu. Opisano stanowisko laboratoryjne przeznaczone do pomiarów zawartości harmonicznych w układach z transformatorami. Przedstawiono przykładowe wyniki badania zawartości harmonicznych w prądach po dwóch stronach transformatora obciążonego prostownikiem 6-pulsowym.
EN
The article describes the impact of distorted current and voltage waveforms on the operation of devices installed in the power system. The transformer is presented as a source of current harmonics. A laboratory stand intended for measuring harmonic content in systems with transformers is described. Examples of test results for harmonic content in currents on both sides of a transformer loaded with a 6-pulse rectifier are presented.
2
EN
This study investigates and filters harmonics currents generated by a hybrid system with a storage system (photovoltaic-wind-battery) for Household Applications. In this paper, we prefer to use passive filtering to mitigate the harmonic’s currents especially the passive tuned filter (single and multiple). This method is the most used because it's cheap and effective. The hybrid system studied is used for power supply household applications. This modern system can improve efficiency, reliability, and security while reducing operating costs and offering flexibility. For better working for our system, we use two commands called maximum power point tracking command (MPPT); one for photovoltaic panels, and the second for the wind system, the pulse width modulation control (PWM) for the inverter, and for the control the battery we apply a DC/DC buck-boost. The simulation results obtained with filtering show the improvement of current waveforms and acceptable values of total harmonic distortion (THD).
PL
Niniejsze badanie koncentruje się na badaniu i filtrowaniu prądów harmonicznych generowanych przez system hybrydowy z systemem magazynowania (bateria fotowoltaiczna-wiatrowa) do zastosowań domowych. W tym artykule wolimy stosować filtrowanie pasywne do łagodzenia prądów harmonicznych, zwłaszcza pasywny filtr strojony (pojedynczy i wielokrotny). Ta metoda jest najczęściej używana, ponieważ jest tania i skuteczna. Badany system hybrydowy jest wykorzystywany do zasilania w gospodarstwach domowych. Ten nowoczesny system może poprawić wydajność, niezawodność i bezpieczeństwo przy jednoczesnym obniżeniu kosztów operacyjnych i zapewnieniu elastyczności. Aby lepiej pracować dla naszego systemu, używamy dwóch poleceń zwanych poleceniem śledzenia maksymalnego punktu mocy (MPPT); jeden do paneli fotowoltaicznych, a drugi do systemu wiatrowego, sterowanie modulacją szerokości impulsu (PWM) dla falownika, a do sterowania akumulatorem stosujemy buck-boost DC/DC. Wyniki symulacji uzyskane z filtrowaniem wskazują na poprawę przebiegów prądowych oraz akceptowalne wartości całkowitego zniekształcenia harmonicznego (THD).
PL
Podstawowym czynnikiem powodującym zwiększenie wartości błędów prądowego i kątowego dla transformacji składowych wyższych częstotliwości jest zjawisko dodatkowego odkształcenia prądu wtórnego przez indukcyjny przekładnik prądowy wynikające z nieliniowości charakterystyki magnesowania jego rdzenia magnetycznego. Głównym celem tego artykułu jest potwierdzenie, że dostępne na rynku indukcyjne przekładniki prądowe mogą zapewniać dokładną transformację wyższych harmonicznych pierwotnego prądu odkształconego.
EN
The primary factor causing the increase in the values of current error and phase displacement for the transformation of higher frequency components is the phenomenon of additional distortion of the secondary current by the inductive current transformer. It results from the non-linearity of the magnetization characteristics of its magnetic core. The main purpose of this article is to confirm that the inductive current transformers available on the market can ensure accurate transformation of distorted current harmonics.
PL
Podstawowymi zniekształceniami współczesnych systemów elektroenergetycznych są składowe harmoniczne, wywoływane najczęściej przez obciążenie nieliniowe. W pracy rozważano obwód prądu przemiennego zawierający część liniową LR oraz obciążenie nieliniowe, którego napięcie jest proporcjonalne do funkcji signum prądu. Przedstawiono symboliczne rozwiązania równania tego modelu w stanie ustalonym dla przepływu prądu bez przerw, uwzględniając wszystkie harmoniczne. Dla prądu płynącego z przerwami równanie to rozwiązano numerycznie wykorzystując system MATLAB-Simulink. Wybrane wyniki badań numerycznych, charakterystyki przedstawiono w postaci graficznej.
EN
The main distortions of modern power systems are harmonics, usually caused by a nonlinear load. This paper considers an AC circuit containing a linear LR component and a nonlinear load with a voltage proportional to the signum function of the current. The symbolic solutions of the equation of this model in the steady state for the current flow without interruptions are presented, with consideration of all harmonics. For current flowing with interruptions, this equation was solved numerically using the MATLAB-Simulink system. Selected numerical results, characteristics are presented in graphical form.
EN
Although increasing the number of switches increases the switch losses, most designed controllers focus on controlling an inverter circuit with more than six switches. The paper aims to address this issue that arises in implementation of the voltage source inverter (VSI) for brushless DC (BLDC) motors. It optimises the sinusoidal pulse width modulation (PWM) controller, minimising total harmonic distortion (THD) while keeping the VSI’s circuit at six switches to avoid increased switching losses. This was achieved by applying an artificial neural network (ANN) to generate a signal, which combines with the already existing reference and carrier signals. The addition of the new signal to the existing signals contributed to generating more pulses compared with the conventional sinusoidal PWM. Simulink was used to design the system and analyse its performance with the conventional and neutral point clamped (NPC) VSI systems. Results indicated that the proposed system performs better when controlled with an LCC filter. Compared with the control experiments, its output waveform has the lowest THD value, which is 6.04%. The switching losses of all the systems were also computed. Results from the computation indicated that the proposed system is capable of reducing the switching losses by 0.6 kW compared with the NPC VSI brushless DC motor (BLDCM) system. BLDCM speed was tested across various conditions; the results are reported in Section 5.
EN
NETD (Noise Equivalent Temperature Difference) parameter of infrared systems is the important parameter that allows determining the limit of temperature measurement of tested objects. Currently, the commercially available devices have the NETD < 20 mK. The infrared (IR) detectors and accompanying electronic circuits generate noise. In consequence, it is difficult to achieve the high level of signal-to-noise ratio (SNR) while measuring temperature. This paper presents a method of measuring the root mean square (RMS) value of alternating current, using a single-detector high-speed IR system for detecting 100 Hz harmonic spectral component of temperature, whose value is certainly below NETD limit.
PL
Parametr NETD (ang. Noise Equivalent Temperatura Difference) dla systemów podczerwieni (IR) jest ważnym parametrem pozwalającym określić dolną granicę pomiaru temperatury badanych obiektów. Obecnie dostępne na rynku chłodzone kamery termowizyjne charakteryzuje parametr NETD < 20 mK. Detektory podczerwieni i towarzyszące im obwody elektroniczne generują szum. W konsekwencji trudno jest uzyskać wysoki poziom stosunku sygnału do szumu (SNR) w systemach radiacyjnego pomiaru temperatury. W artykule przedstawiono metodę pomiaru wartości skutecznej prądu przemiennego stosując system IR z pojedynczym detektorem o dużej częstotliwości generacji próbek. Metoda polega na pomiarze składowej harmonicznej widma temperatury o częstotliwości 100 Hz, której wartość jest znacznie mniejsza od poziomu określonego przez parametr NETD.
EN
The impact of harmonic distortions on power grids is a major issue in contemporary power networks as a result of the extensive application of non-linear loads. The purpose of this article is to explore the problem of harmonic distortion in power grids and its impact on the elements of the power grid, such as cable lines and transformers. The Schaffner PQS software product was used in this study to model power grids. New techniques for modeling power grids and finding technical solutions that meet the IEEE 519-2014 standard were introduced. The study finds that harmonic distortion can lead to an additional heat load being placed on cable lines and reduces the power available to transformers, which can decrease their rated power. The application of modern software reduces the time and complexity of calculations, and the availability of software solutions for limiting harmonic distortion simplifies the creation of solutions that meet this standard. Using the methods presented in the study, engineering solutions can be improved, the reliability of electrical systems can be increased, and the loss of electrical energy can be reduced. This can enhance efficiency for design engineers and technical specialists involved in the operation of power grids.
PL
Wpływ zniekształceń harmonicznych na sieci elektroenergetyczne jest ważnym zagadnieniem we współczesnych sieciach elektroenergetycznych w wyniku szerokiego zastosowania obciążeń nieliniowych. Celem niniejszego artykułu jest jest zbadanie problemu zniekształceń harmonicznych w sieciach elektroenergetycznych i ich wpływu na elementy sieci, takie jak linie kablowe i transformatory. Do modelowania sieci elektroenergetycznych wykorzystano oprogramowanie Schaffner PQS. Przedstawiono nowe techniki modelowania sieci elektroenergetycznych i znajdowania rozwiązań technicznych zgodnych ze standardem IEEE 519-2014. Badanie wykazało, że zniekształcenia harmoniczne mogą prowadzić do dodatkowego obciążenia cieplnego linii kablowych i zmniejszać moc dostępną dla transformatorów, co może zmniejszać ich wydajność. Zastosowanie nowoczesnego oprogramowania zmniejsza czas i złożoność obliczeń, a dostępność rozwiązań programowych do ograniczania zniekształceń harmonicznych upraszcza tworzenie rozwiązań spełniających tę normę. Korzystając z metod przedstawionych w badaniu, można ulepszyć rozwiązania inżynieryjne, zwiększyć niezawodność systemów elektrycznych i zmniejszyć straty energii elektrycznej. Może to poprawić efektywność pracy inżynierów-projektantów i specjalistów technicznych zaangażowanych w eksploatację sieci elektroenergetycznych.
PL
Opis parametrów Jakości Energii Elektrycznej wymaga zastosowania właściwych miar i współczynników. Jednym z nich jest współczynnik całkowitego odkształcenia krzywej prądu THDI. Przy prawidłowym zastosowaniu, wartość współczynnika odkształcenia krzywej prądu jest użytecznym parametrem, który pozwala pełnić funkcję oceny jakości energii w zakładzie. W artykule przedstawiono sposób poprawnej interpretacji wartości ww. wskaźnika.
EN
The description of Electric Power Quality parameters requires the use of appropriate measures and coefficients. One of these is the Total Current Curve Distortion coefficient THDI. When used correctly, the value of the current curve distortion coefficient is a useful parameter that allows to perform the function of power quality assessment in the industry. The article presents a method for correct interpretation of the value of the above-mentioned index.
PL
Zwiększony udział odbiorników nieliniowych prowadzi do pogorszenia się parametrów jakości energii elektrycznej w torach przesyłowych. Jednocześnie obserwowany wzrost kosztów za energię elektryczną przyczynia się do zwiększenia częstości instalowania źródeł fotowoltaicznych. Równoczesne występowanie tych dwóch czynników wprowadza dodatkowe trudności w doborze i pracy filtrów aktywnych, stosowanych w celu kompensacji mocy biernej i eliminacji wyższych harmonicznych prądu. W artykule zostały przedstawione wybrane parametry jakości energii elektrycznej w układzie z instalacją fotowoltaiczną i filtrem aktywnym.
XX
The increased share of nonlinear loads leads to a deterioration of power quality parameters in the transmission paths. At the same time, the observed increase in the cost of electricity contributes to the increased frequency of installation of photovoltaic sources. The simultaneous occurrence of these two factors introduces additional difficulties in the selection and operation of active filters, used to compensate for reactive power and eliminate higher current harmonics. Presented in this article are selected parameters of power quality in a system with photovoltaic installation and active filter.
EN
Power lines or underground power cables generate electromagnetic interaction with other objects near to them. This study evaluates the magnetic field emitted by underground extra high voltage cables. The presented work aims to show a numerical simulation of the magnetic field of a buried 400 kV underground power line, which is used as a novel prototype in several countries at a short distance. The underground power cable study, in the presence of the current harmonics at different positions, with time variation by finite element resolution, using Comsol Multiphysics with Matlab software in two dimensions. The simulation results illustrate the magnetic flux density variation-in terms of amplitude and distribution as a function of different actual harmonics rates. The underground cable performance and magnetic field have affected by the harmonics effects. The maximum magnetic induction levels generated by significant harmonics are superior to the limits recommended by the international standard norms. In this paper, shielding has been used as an appropriate remedy to attenuate the magnetic field.
EN
The development in industrial systems leads to the augmentation in the consumption of the power. Therefore, this development makes use of multiphase machines. The use of multiphase machines caused several problems and defects. Electrical energy is mainly distributed in a three-phase system to provide the electrical power necessary for the electrical engineering equipment and materials. The sinusoidal aspect of the required original voltage primarily preserves its essential qualities for transmitting useful power to terminal equipment. When the voltage waveform is no longer sinusoidal, perturbations are encountered, which generate malfunctions and overheating of the receivers and the equipment connected to the same electrical supply network. The main disturbing phenomena are harmonics, voltage fluctuations, voltage unbalances, electromagnetic fields, and electrostatic discharges. This present work aims to study the effects of harmonic pollution and voltage unbalance on the five-phase permanent magnet synchronous machine using spectrum current analysis and wavelet transform.
PL
W artykule omówiono podstawowe straty energii w transformatorach energetycznych, a także straty dodatkowe, występujące wtedy gdy pobierany z transformatora prąd nie jest przebiegiem sinusoidalnym. Zawarto dane dostępne w literaturze, jak i wynikające z własnych badań.
XX
Article presents the basic energy losses as well as additional losses occurring when the transformer current is not a sinusoidal wave. Article contains data available in literature and conclusions from own research.
EN
Conventional boost converters are widely used for connecting low-voltage power sources and inverters in motor control. However, a large filter capacitor bank is often used to reduce DC-link ripples that occur when an inverter is connected to a boost converter. Otherwise, significant voltage and current perturbations can impact on battery performance degradation and cause torque ripple, speed ripple and vibration in brushless DC (BLDC) motors. To suppress the converter’s DC-link ripple, this paper proposes a new control strategy for boost converter controller to generate low-ripple DC-link voltage or current at different motor speeds. In the proposed method, observers are designed to adaptively estimate the DC-link voltage and current harmonics. The harmonic terms are used as feedback signals to calculate the DC converter’s duty cycle. The entire control model is implemented on an embedded system, and its robustness is verified by simulation and experimental results that show the DC-link voltage and current ripples can be reduced by about 50% and 30%, respectively.
EN
Mine drainage pump is the most important load in mining which requires high reliability when operating. Currently, the power supply of a mine drainage pump is connected to the same power line with many nonlinear loads, and is equipped with power electronic converters, which makes the power supply nonsinusoidal. During the working process of a mine drainage pump, the load-carrying factor often changes, and many types of failures occur, among which single-phase voltage loss is the most common problem. In the case of a nonsinusoidal power supply, if a single-phase voltage loss occurs in different load modes, it will greatly affect the working mode of the mine drainage pump leading to influences on the working efficiency, the life of the pump, and sometimes it is necessary to recalculate the protection parameters. This paper studies the influence of single-phase voltage loss and load carrying mode on the working mode of mine drainage pump motor in case the of nonsinusoidal power supply. Research results show that, in the case of nonsinusoidal power supplied with single-phase voltage loss, copper losses in the rotor and stator circuits increase with increases in voltage total harmonic distortion (THD) and load-carrying factor, 5th order reverse harmonic increases copper loss in asynchronous motor the most, and higher harmonic components have less effect on copper loss in the motor. At the same time, the speed ripple decreases with the increase of the motor load factor and decreases in the presence of the 5th order negative sequence harmonic, and increases significantly in the presence of the 7th order positive sequence harmonic. 5th order negative sequence harmonic increases, the torque ripple increases, while the 7th order positive sequence harmonic reduces the torque ripple in the case of single-phase voltage loss. The results of the paper will help improve the operational efficiency of the mine drainage pump in Vietnam's mines.
EN
Explosion-proof transformers 6/1.2 kV is important electrical equipment responsible for supplying electricity in underground mine electrical networks. A failure of this transformer will cause an interruption in the power supply and loss of safety in underground mining. Usually, explosion-proof transformers in underground mine electrical networks are designed and manufactured to work with ideal parameters such as sinusoidal currents, and the network structure is symmetrical. However, today in underground mine electric networks, many power electronics are connected to the network, such as inverters and soft starters. As a result, a current flowing through the transformer is non-sinusoidal, overloading the transformer even by working with the design specifications. This paper studies the influence of harmonics on the working efficiency of a 6/1.2 kV transformer in a pit mine. Research results suggest reasonable solutions for transformer operation to ensure longevity and not cause damage to the transformer.
PL
W artykule przedstawiono rozwiązania firmy Siemens w dziedzinie jakości energii, na które składają się rejestratory oraz analizatory jakości energii jak również oprogramowanie i aplikacje analityczne, które pozwalają na szybki dostęp do zbieranych danych i ocenę jakości energii w systemie.
EN
The article presents Siemens solutions in the scope of power quality, which consist of power quality recorders and analyzers, as well as software and analytical applications that allow for quick access to the collected data and evaluation of power quality in the system.
PL
W artykule przedstawiono jeden z możliwych sposobów modelowania odbiorników nieliniowych w dziedzinie częstotliwości. Za przykład posłużyły wybrane oprawy oświetleniowe LED, dla których przeprowadzono pomiary oraz opisano zależności prądowo napięciowe dla poszczególnych harmonicznych w zakresie ich napięć znamionowych. Wyprowadzone modele zweryfikowano w opracowanym środowisku symulacyjnym dla przykładowego obwodu zawierającego 40 opraw danego typu.
EN
One of the possible ways of modeling nonlinear loads in the frequency domain has been presented in the paper. Selected LED luminaires were used as examples, for which measurements were carried out and voltage-current relationships for individual harmonics in the range of their rated voltages were described. The derived models were verified in the developed simulation environment for an example circuit containing 40 fixtures of a given type.
EN
Static compensators of reactive power (STATCOMs) are among the most efficient devices for improving the network power quality. The efficiency of such devices is largely determined by the used automatic control technique. In this work, we propose an advanced hybrid algorithm based on Sliding Mode Control (SMC) combined with classical proportional-Integral (PI) technique. To show the efficiency of the proposed method, a comparison with the traditional PI control is performed. The comparison focused mainly on dynamic performance and grid harmonic pollution.
PL
Jakość działania kompensatora mocy biernej STATCOM zależy od właściwości układu automatycznego sterowania. W pracy zaprezentowano hybrydowy algorytm bazujący na sterowaniu ślizgowym współpracujący z klasycznym sterownikiem PI.
EN
The paper presents an algorithm for determining parameters of single sinusoidal components contained in the analyzed digital signal with the use of a small number of mathematical operations. The proposed algorithm can be applied, among others, in measuring devices to monitor basic parameters of electric energy quality as well as in devices used to determine the phasor in the power system. The proposed simplification of the algorithm for determining the sinusoidal components of the analyzed signal allows to use it in embedded devices with low computing power, which translates into lower cost of construction of devices of this type, while maintaining full functionality of the measuring system. The article contains a mathematical argument, which leads to the proposed algorithm, then the optimization of the number of performed mathematical operations is presented. The last part of the paper includes information about performed mathematical operations and presents exemplary times of execution of the algorithm for simple embedded devices.
PL
W artykule omówiony został wpływ przebiegów odkształconych na dokładność pomiaru mocy w masowo instalowanych przez dystrybutorów systemu energetycznego statycznych licznikach energii elektrycznej. Przedstawiono podstawowe aspekty metrologiczne oraz niezawodnościowe dotyczące rzeczywistego pomiaru energii. Omawiana zagadnienia przedstawiono w oparciu o analizę dwóch przypadków: przebiegi odkształcone ze składową podstawową i zawartością wyższych harmonicznych oraz przebiegi odkształcone z zawartością subharmonicznych i interharmonicznych.
EN
The article discusses the influence of deformed waveforms on the accuracy of power measurement in the energy meters installed by the distributors of the power system. The basic sub-logical and reliability aspects of the real energy measure are presented. The discussed issue is presented based on the analysis of two cases: deformed waveforms with a fundamental component and higher harmonic content and distorted waveforms with subharmonic and interharmonic contents.
first rewind previous Strona / 8 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.