Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 13

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
PL
W pracy przedstawiono wyniki badań wpływu objętościowego natężenia przepływu gazu oraz liczby Reynoldsa na jednostkowe zużycie mocy mieszania układów dwufazowych w mieszalniku zaopatrzonym w różne kombinacje mieszadła turbinowego Rushtona, mieszadła turbinowego z łopatkami pochylonymi pod kątami 45° oraz mieszadła turbinowo-tarczowego Smitha na wspólnym wale. Pomiary wykonano w wodnym roztworze wysokoczą-steczkowego poliakryloamidu (Rokrysol WF1).
EN
The paper contains experimental study results dealing with gas flow rate and Reynolds number effect on the power consumption for two phase system agitated in a tank equipped with various combinations of the Rushton turbine, pitched blade turbine at angle 45° and Smith disc turbine. Aqueous solution of high-molecular polyacrylamide (Rokrysol WF1) was used as liquid phase.
PL
Występujące w przyrodzie surfaktanty, których przykładem są saponiny, mogą być wykorzystywane w gospodarstwach domowych i na skalę przemysłową ze względu na łatwą i ekonomiczną wydajność. W pracy przedstawiono wyniki badania wpływu czasu mieszania na wartość napięcia powierzchniowego saponin zawartych w orzeszkach piorących. Uzyskane wyniki wartości napięcia powierzchniowego są porównywalne z wartościami literaturowymi dla czystych saponin. Z punktu widzenia technologicznego 24-krotne obniżenie czasu ekstrakcji świadczy o przewadze zastosowanej : metody dynamicznej w stosunku do statycznej.
EN
Natural surfactants, e.g. saponins, can be very useful in households and in industry due to accessibility and economical efficiency. Soap nuts containing saponins are completely natural detergents. Results of mixing effect on surface tension in water solution of soap nuts are presented in the paper. The results of experimental studies showed that values of surface tension for Sapindus saponins are comparable with the ones suggested in literature. Two dozen shorter extraction time proved the dynamic method superiority over the static one.
PL
W pracy przedstawiono wyniki pomiarów średniej grubości filmu cieczy spływającego po gładkiej powierzchni pochyłej. Badanymi układami były woda, olej pochodzenia roślinnego oraz emulsje typu olej w wodzie o różnych udziałach objętościowych fazy olejowej. Wykazano wpływ zawartości fazy olejowej na średnią grubość spływającej warstwy cieczy.
EN
Measurement results of mean thickness of liquid film flowing down an inclined plate are presented in the paper. Water, rape oil and oil-in-water emulsions of different volume fractions of oil were used as liquids. An effect of oil volume fraction on the mean film thickness was observed.
PL
W pracy przedstawiono wyniki badań wpływu objętościowego natężenia przepływu gazu. częstości obrotów mieszadła oraz stężenia wodnych roztworów polimerów poliakryloamidu (Rokrysol WF1) na współczynnik zatrzymywania gazu w mieszalniku zaopatrzonym w dyfuzor membranowy GJ HD 270 oraz dwa mieszadła na wspólnym wale: standardowa mieszadła turbinowe Rushiona i mieszadła turbinowe z łopatkami prostymi.
EN
The paper contains results of experimental studies on effect of gas flow rate, agitator rotational speed and concentration of aqueous solutions of polyacrylamide (Rokrysol WF1) on gas hold-up in a tank equipped with the membrane gas distributor G J H D 270 and two impellers on the common shaft: Rushton turbines and flat blade turbines.
PL
W pracy przedstawiono wyniki badań wpływu udziału masowego ciała stałego w wodnych roztworach gliceryny i poliakryloamidu (Rokrysol WF1) oraz mieszanin tych roztworów na średnią prędkość sedymentacji. Fazę stałą stanowił piasek kwarcowy o różnych średnicach ziaren.
EN
The paper contains the results of experimental studies directed on an effect of mass fraction of solid particles in aqueous solutions of glycerol and polyacrylamide (Rokrysol WF1) and in mixtures of these solutions on a mean velocity of sedimentation. Quartz sand of a different grain size was used as solid phase.
PL
W pracy przedstawiono wyniki badań wpływu modyfikacji powierzchni na grubość spływającej warstwy cieczy. Wykazano wzrost średniej grubości filmu w porównaniu z powierzchnią gładką w zakresie burzliwym dla wszystkich typów powierzchni chropowatych. Największy efekt w stosunku do płyty gładkiej, rzędu 50%. zaobserwowano dla płyty pokrytej uziarnieniem od wymiarach od 300 do 710 μm.
EN
Results of studies on the effect of surface modification on the thickness of flowing down liquid film have been presented in the paper. It has been shown that an increase of the mean film thickness] was observed for all rough surfaces in the turbulent flow range in comparison with a smooth plate. The greatest effect (about 50%) for the plate coated by grains of the size from 300 to 710 μ m was found.
PL
W pracy przedstawiono analizę procesu rozpylania emulsji wodno-olejowej w dyszy o pierścieniowym przekroju otworu wylotowego. Na podstawie analizy obrazów rozpylanej strugi stwierdzono, że zawartość oleju w emulsji w istotny sposób wpływa na zmianę parametrów charakterystycznych procesu rozpylania. Wraz ze wzrostem udziału objętościowego oleju w emulsji kąt rozpylania maleje. Wzrost natężenia przepływu emulsji powoduje zmniejszenie średniej objętościowej średnicy powstających kropel.
EN
In the paper an analysis directed to the atomization process of water-oil emulsions flowing through a ring-shaped orifice nozzle has been presented. An analysis of the photos of sprayed stream showed that changes in physical properties of liquid phase led to the significant changes in the spray characteristics. With the increase of volume content in emulsion the spray angle decreased. The volumetric mean diameter of droplet decreased with the increase of liquid flow rate.
EN
The studies presented were focused on the effect of polymers and surfactants additives on changes in the free surface of liquid falling film. The suppression of surface waves and the decrease of the mean film thickness have been observed. Total decay of waves on the free surface in surfactant solutions can be explained by flow laminarization and by the formation of internal shear-induced structures.
11
Content available remote Characteristics of falling liquid films of surfactants and polymers solutions
EN
In the present work the results of the studies on the effect of surface active-agents and polymers on a mean film thickness have been presented. The experimental studies on mean thickness of a film of water and aqueous solutions of hexadecyltrimethylammonium bromide HTAB and polyacrylamide flowing down the hydrophobic organic glass plate, have been carried outIt was stated that the reduction of the film thickness is observed when the shear induced structures of a polymer and surfactant are present in a solution. The best results were obtained for aqueous solutions of HTAB with addition of sodium salicylate.
EN
In this paper the power consumption, mixing time and mixing efficiency in a non-standard vessel equipped with various impellers have been investigated. The measurements of mixing time and power consumption were performed in water using turbine and disc impellers. It has been shown that mixing time depends strongly on the distance between impellers for multiple systems and on the clearance between a single impeller and tank bottom.
PL
Przedstawiono wyniki badań eksperymentalnych średniej grubości filmu wodnych roztworów środków powierzchniowo czynnych spływających po powierzchni hydrofobowej. Zaobserwowano zjawisko gaszenia fal powierzchniowych, a więc laminaryzację spływającej warstwy.
EN
The results of experimental studies on the mean film thickness of the aqueous solutions of surface- active agents flowing down the hydrophobic surface have been presented. The phenomenon of the quenching of surface waves, thus the laminarization of flowing layer, has been observed.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.