Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 19

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  związki kompleksowe
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
1
Content available Ignition compositions for use in ramjet engines
EN
The results of testing pyrotechnic compositions used in the ignition systems of a laboratory ramjet engine, are presented. Black powder (BP) and its formulations with a mixture of boron, potassium nitrate(V) (KNO3) and polymer binder were used as reference compositions. To modify the combustion characteristics of these formulations, additives in the form of energetic coordination complexes were utilized. The method of synthesis and results of tests carried out on the selected compounds (including sensitivity to friction and impact) is presented. The prepared pyrotechnic compositions were tested in a targeted ignition system to examine the effect of the addition of the coordination complexes on the burning speed of the mixture. The results obtained indicate that the addition of selected complex compounds increases the pressures generated by mixtures containing KNO3 and boron. This effect was not observed in the case of compositions based on BP.
PL
W pracy przedstawiono wyniki badań mieszanin pirotechnicznych wykorzystywanych w układach zapłonowych laboratoryjnego silnika strumieniowego. Jako kompozycje bazowe zastosowano proch czarny oraz jego mieszaniny z układem zawierającym bor, azotanu(V) potasu (KNO3) i lepiszcze polimerowe. W celu modyfikacji charakterystyk spalania sporządzonych kompozycji, wprowadzono dodatki w postaci energetycznych związków kompleksowych. Zaprezentowano metodę otrzymywania zastosowanych modyfikatorów oraz wybrane wyniki badań tych związków (m.in. wrażliwość na tarcie i uderzenie). Sporządzone mieszaniny pirotechniczne badano w docelowym układzie zapłonowym w celu sprawdzenia wpływu obecności modyfikatora na prędkość spalania kompozycji. Uzyskane wyniki badań wskazują, że dodatek wybranych związków kompleksowych wpływa na zwiększenie wartości ciśnień generowanych przez mieszaniny zawierające KNO3 i bor. Wpływu tego nie zauważono w przypadku kompozycji bazujących na prochu czarnym.
EN
Recently, hospitals have undergone major changes. Minimally invasive surgery is becoming more common, and numerous innovations are emerging, such as interventional radiology (IVR) and hybrid surgery. In order to keep pace with changes in this extremely dynamic field, scientist keep working on the development of imaging technology and the improvement of image display devices and new compounds acting as contrast agent (CA). In medicine, metals are used for diagnostic and therapeutic purposes. Inorganic elements are increasingly used as contrast agents in medical imaging due to their unique physicochemical properties. In this review, we would like to focus on the latest literature reports that contain information on Gd(III), W(IV), Mn(II), Eu(III) and 99mTc used in medical diagnostics.
EN
The olefin polymerization catalysts constitute a large group of various compounds. Metallocene complexes are the largest part of this group. However, due to the instability at industrial plastics temperatures and the decomposition of complexes after MAO (or MMAO) activation, they have been partly replaced by non-metallocene compounds. This article concerns the studies on new non- metallocene precatalysts for the olefin polymerization and oligomerization. The report focuses on the structure and the catalytic activities of the complexes of chromium(III), vanadium(IV) and cobalt(II) with the following ligands: dipicolinate, 2-pyridinecarboxylate, oxalate, oxydiacetate, iminodiacetate, 2,2’- bipyridine, 4,4’-dimethoxy-2,2’-bipyridine, 1,10-phenantroline. These complex compounds are highly active precatalysts for olefin polymerization and oligomerization. The complexes: [Cr(dipic)2][Cr(bipy)(dipic)H20] 2H20 and [Cr(dipic) 2]Hdmbipy 2.5H20 deserve special attention because they are new type of the precatalysts i.e. organic salt type complexes composed both of organic cations and anions. These compounds are not only interesting because of their structure but also because of their high catalytic activity.
EN
In this review, the most important complex compounds of ruthenium, gold, vanadium, chromium, bismuth, technetium were selected, and then their most important applications were described in medicine. Ruthenium has been identified as a metal with potential medical use, useful in cancer chemotherapy. The possibility of using its chemical behavior by developing complexes activated for cytotoxic activity through a mechanism of reduction in tumor tissue was discovered. Among the new anti-cancer drugs based on complex compounds, gold compounds have gained a lot of interest. This is due to their strong inhibitory effect on the growth of cancer cells and the observation that many compounds inhibit the enzyme thioredoxin reductase. This enzyme is important for the proliferation of cancerous tissues, and its inhibition is associated with the release of anti-mitochondrial effects. Clinical tests have shown that vanadium compounds can be used as anti-diabetic drugs with low toxicity. However, the therapeutic concentration range is very narrow, just a few micromoles of the compound are enough to cause apoptosis, necrosis and inflammation of healthy cells. Chromium improves the glucose system in people with hypoglycemia or hyperglycemia. Vanadium compounds mainly used to create potential drugs are inorganic compounds such as vanadates(V), vanadyl cation(IV), vanadium oxide(V) and a number of compounds containing organic ligands. Among the metal complexes, chromium(III) picolinate has successfully become a nutrient used to prevent high blood sugar levels. One of the most commonly used bismuth(III) compounds is bismuth subsalicylate. It is one of the few bismuth compounds regularly used to treat various gastrointestinal complaints, including duodenal ulcers. 99mTc injected into the body, depending on its chemical form and molecular structure, concentrates in the examined organ and emits a quantum that allows imaging of the organ through flat scintigraphic or emission processes. The role of complex compounds in medical imaging is largely based on the creation of radiopharmaceuticals for early detection of diseases and cancer radiotherapy. Radiopharmaceuticals are radionuclide-containing drugs and are routinely used in nuclear medicine to diagnose or treat a variety of diseases.
EN
Since late 1930s copper has been recognized as an essential trace metal in living organisms. Copper(II) cation plays the role as a coordination center not only in the single-nuclear complexes, but also in the multinuclear coordination compounds with a particular emphasis on the polymers as ligands. The selected complex compounds of copper(II) with ligands which are organic and inorganic species have been characterized taking into account their physico-chemical properties. In addition, the complex compounds containing ligands such as Schiff ’s bases, hydrocarbons, organic bases, and also polycarboxylic anions: oxydiacetate, thiodiacetate, iminodiacetate and dipicolinate have been described considering their role in the biological systems. Nowadays tested coordination compounds of copper(II) have interesting antibacterial activities against bacteria strains that are antagonistic to the human. The antibacterial activity of copper(II) complex is stronger than some of the known antibacterial substances e.g. ciprofloxacin. In addition, copper(II) complex compounds exhibit a 64-fold greater antimicrobial properties than copper(II) chloride. Moreover, these compounds have antifungal and antioxidant properties. The activities of antibacterial, antifungal, and antioxidant complex compounds of copper( II) have been compared to the reactivities of these compounds with complexes used as reference substances, e.g. L-ascorbic acid, in the assay using nitrotetrazolium blue.
EN
Although polyamines (PA) belong to relatively simple aliphatic substances, their role in life processes of animals and plants is of key importance [1–5]. The group of the most important amines, called biogenic ones includes: Spermine (Spm): H2N(CH2)3NH(CH2)4NH(CH2)3NH2 Spermidine (Spd): H2N(CH2)3NH(CH2)4NH2 Putrescine (Put): H2N(CH2)4NH2. Of secondary importance are homologues of biogenic amines, occurring in lower contents in living organisms [2, 6–8]: 1,3-diaminopropan: H2N(CH2)3NH2 Cadaverine: H2N(CH2)5NH2 Homospermidine: H2N(CH2)4NH(CH2)4NH2 Norspermine (3,3,3-tet): H2N(CH2)3NH(CH2)3NH(CH2)3NH2 Thermospermine: H2N(CH2)3NH(CH2)4NH(CH2)4NH2 Caldopentamine: H2N(CH2)3NH(CH2)3NH(CH2)3NH(CH2)3NH2. The first polyamine discovered in a living organism was tetramine, a spermine crystallised out of sperm in 1678 by Van Leewenkeuk [9]. Putrescine was discovered in the end of the 19th century in microbes and then triamine: spermidine was discovered in the beginning of the 20th century [2]. Later studies have shown that in animal cells spermidine and spermine occur at elevated levels, while in prokaryotes spermidine and putrescine contents are dominant. Putrescine, spermidine, 1,3-diaminopropan, homospermidine, norspermidine, and norspermine have been found in many gramnegative bacteria and algae [7, 10, 11]. Total concentration of PA in living organisms is on the order of millimols, however, the concentration of free polyamines is much lower. A low level of free amines follows from the fact that they are involved in noncovalent interactions with biomolecules occurring in living organisms such as nucleic acids, proteins, or phospholipids. High concentrations of non-bonded polyamines have been detected first of all in young molecules in the process of growth, in particular in rapidly proliferating cancer cells [6, 12]. Elevated levels of free polyamines have been observed, e.g. in breast, colon, lung, prostate, and skin tumours, accompanied by changed levels of enzymes responsible for biosynthesis and catabolism of polyamines. Because of the increased level of free polyamines and a tendency of their interaction with nucleic acids and other bioligands, these compounds have become objects of intense study [1, 13–19]. There is no doubt that the regulation of biosynthesis of polyamines and catabolism is one of the most important pathways in the search strategy for chemoprevention and chemotherapeutic drugs [14, 15, 20–36]. The present state of knowledge of these processes, their significance in biological systems, and their application in medicine are presented in subsequent sections of this chapter.
PL
Brak uniwersalnych leków o aktywności przeciwnowotworowej powoduje, że obecnie wiele badań skupia się poszukiwaniu nowych związków chemicznych o aktywności antyoksydacyjnej i cytotoksycznej. W praktyce klinicznej stosuje się wiele terapeutyków, ale ich toksyczne działania uboczne, takie jak zahamowanie czynności szpiku zmuszają naukowców do syntezy leków o zredukowanym działaniu niepożądanym. Kwercetyna jest flawonoidem, który sam w sobie wykazuje aktywność przeciwnowotworową, a dodatkowo jej struktura umożliwia łatwe tworzenie związków chelatowych z metalami. Kompleksy związków bioaktywnych i jonów metali często wykazują silne właściwości cytotoksyczne i przeciwnowotworowe. Dokonano przeglądu literatury podsumowującej dotychczasowe badania aktywności biologicznej kompleksów kwercetyny z metalami na wybrane linie komórkowe.
EN
A review with 59 refs.
PL
Celem niniejszej pracy było otrzymanie nowego związku kompleksowego, który z powodzeniem mógłby być stosowany w nowoczesnych systemach uzbrojenia – jako wysokoenergetyczny składnik stałych paliw rakietowych. Związek taki powinien spełniać kilka warunków: katalizować reakcje w kierunku otrzymania chłodniejszych produktów rozkładu, zwiększać szybkość palenia i posiadać niską wrażliwość na bodźce mechaniczne. Jako składnik energetyczny wybrano wykazujący niską wrażliwość 4,4’,5,5’-tetranitro-2,2’-biimidazol (TNBI), a jako atom centralny – miedź, ponieważ CuO jest znany z aktywności katalitycznej. Kompleksowy związek TNBI, miedzi, amoniaku i wody, otrzymano w reakcji chlorku miedzi(II) z TNBI i amoniakiem w środowisku wodnym. Nowy związek poddano badaniom technikami jądrowego rezonansu magnetycznego, analizy termicznej, analizy elementarnej, absorpcyjnej spektrometrii atomowej oraz wrażliwości na bodźce mechaniczne.
EN
The aim of this work was to synthesis a new complex compound which could be used in modern weapon systems as an energetic ingredient and modificator in composite rocket propellants. It should fulfill the following main characteristics: to catalyze reaction to get cooler products, to enhance burning rate and to reduce sensitivity to mechanical stimuli of propellants. We decided to combine energetic ligand 4,4’,5,5’-tetranitro-2,2’-biimidazole (TNBI), which is relatively insensitive in form of salt with copper as a coordination centre, because cupric oxide is known as catalyzing agent. New complex of TNBI, copper and ammonia was obtained in the reaction of copper chloride, ammonia and TNBI in water solution. Properties of the title complex were investigated with nuclear magnetic resonance methods, thermal analysis, elemental analysis and atomic absorption spectrometry. Sensitivity to impact and friction were determined also.
PL
W artykule przedstawiono problematykę związaną z obecnością i usuwaniem związków miedzi ze ścieków przemysłowych z uwzględnieniem specyfiki ścieków pochodzących z zakładów zajmujących się produkcją płytek drukowanych. Scharakteryzowano właściwości toksykologiczne wybranych związków miedzi, przedstawiono zarys stosowanych procesów technologicznych, źródła jonów miedzi w ściekach i wybrane metody ich usuwania.
EN
This paper presents the issues related to the presence and removal of copper compounds from industrial effluents with including wastewater from plants involved in the production of printed circuit boards. Characterized the toxicological properties of selected copper compounds, described the applicable technological processes, sources of copper ions in the effluents and selected methods for their removal.
PL
W artykule przedstawiono problematykę dotyczącą parametrów fizyko-chemicznych ścieków surowych pochodzących z produkcji płytek drukowanych. Omówiono skład stosowanych kąpieli technologicznych w aspekcie spełnienia wymagań odnośnie wprowadzania ścieków oczyszczonych do wód, ziemi lub kanalizacji miejskiej. Przedstawiono wyniki prób usuwania związków organicznych oraz skompleksowanych jonów miedzi (II) i cyny (II) i (IV) przy zastosowaniu koagulantów zawierających jony Fe (II) i Fe(III). Na podstawie wyników badań wykazano wysoką skuteczność usuwania związków organicznych oraz związków cyny. Wyjaśniono możliwe przyczyny niskiej skuteczności wytracaniem skompleksowanych jonów miedzi (II).
EN
The article presents the issues concerning physical and chemical parameters of raw sewage from the production of printed circuit boards and the composition of the bath used technology in terms of meeting the requirements for the introduction of treated wastewater into surface waters, ground or the municipal sewage system. Showed test results for the removal of organic compounds and ions complexed copper (II) and tin (II) and (IV) using coagulants containing ions of Fe (II) and Fe (III). The studies showed the high efficiency of removal of organic compounds and tin compounds. Explained the possible causes of the difficulties of precipitation complexed copper ions (II).
11
Content available remote Inicjujące materiały wybuchowe z grupy związków kompleksowych
EN
For more than one hundred years, mercury fulminate (MF), lead azide (LA) and lead styphnate (LS) have been used as primary explosives (Fig. 1). They are very good initiatory explosives but they also suffer from serious drawbacks, such as: (a) extremely high sensitivity to mechanical stimuli, (b) thermal, hydrolytic, and chemical instability or lack of resistance to light, (c) incompatibility with metals commonly used in initiating devices, (d) high toxicity of the compounds themselves and their decomposition products [1, 2]. The ongoing search for new primary explosives is aimed at finding materials safer in production and use which do not contain heavy metals and exhibit better initiating performance than the multicomponent compositions being used now. The replacements of the present primaries should be more resistant to accidental stimuli (electrostatic discharge, impact, friction), but they must reliably inflame or detonate, e.g. upon exposure to flame, electrically heated wire or strike with a firing pin in stab and percussion initiators. However their thermal stability should not be too low in order to avoid unexpected explosions of ammunition exposed to heat flow from a fire. On the other hand some of the materials (detonants) must be capable of fast transition from deflagration to detonation. It is not easy to reconcile so many contradictory demands, but from the recently published papers, it appears that it may be possible [3–5]. It has been confirmed many times that some complex compounds with a general formula Mx(L)y(XO)z where M denotes a transition metal cation, L is a nitrogen rich ligand, and XO is an oxygen containing anion are effective primary explosives [3]. The cation plays structure-creating role (i.e. coordinates other molecules) providing stability of the compound and required level of safety. Usually it is also a catalyst of the first stage of decomposition which assures a rapid deflagration to detonation transition – inherent feature of primary explosives. In order to maximize the heat effect of decomposition, the oxygen balance of the compounds ought to be close to zero. Thanks to this the initiating performance of the new primaries may be higher than that of azides and flumintaes. In this work we present a review of papers devoted to synthesis, chemical composition, molecular structure and explosive properties of primary explosives from the group of coordination compounds. A lot of attention was paid especially to the explosives that have already been used in initiating devices and those with unique properties, e.g. highly sensitive to laser radiation. To systematize the review, the title compounds were divided into groups which distinguishing feature was the kind of ligand.
PL
Podano przegląd prac, w których metodą potencjometryczną i spektrofotometryczną wyznaczono wartości stałych trwałości kompleksów Al(IIl), Ga(III), In(IIl), Pb(II), Cd(II), Pr(III), Nd(III), Eu(IlI), Er(IlI), Dy(lII) z kwasem kwercetyno-5'-sulfonowym i AI(III), Ga(III), In(III), Co(II), Ni(II), Cu(II), Pb(II), Cd(II) z solą sodową kwasu moryno-5'-sulfonowego.
EN
The potentiometric and the spectrophotometric method was used to determine the stability constants for complexes of AI(III), Ga(III), In(III), Pb(II), Cd(II), Pr(III), Nd(III), Eu(III), Er(III), Dy(lII) with quercetin-5'-sulfonic acid and of Al(III), Ga(III), In(III), Co(II), Ni(II), Cu(II), Pb(II), Cd(II) with sodium salt of morin-5'-sulfonic acid. Investigations were carried out in aqueous solutions at a constant ionic strength I=0,1 (NaClO4).
EN
The present work aims at a better understanding of tribochemical reactions controlling the steel-on-steel wear process by organic additives containing double bonding. Effect on the wear and tribochemical reactions of selected unsaturated additives in dissolved n-hexadecane were investigated under boundary lubrication conditions in ball-on-disk contact. Several modern microanalytical (FTIRM, SEM/EDS and XPS) techniques were used to get more detailed information concerning the tribochemistry of the tested compounds.
PL
Celem niniejszej pracy było poznanie reakcji tribochemicznych organicznych związków nienasyconych, które wpływają na zużycie skojarzenia tribologicznego, wykonanego ze stali łożyskowej. Wybrane kompozycje dodatków nienasyconych w n-heksadekanie badano w skojarzeniu kula-tarcza, w warunkach tarcia granicznego. Odłożone, na roboczych powierzchniach węzła tarcia, organiczne produkty przemian tribochemicznych badano za pomocą nowoczesnych technik mikroanalizy powierzchni, tj. FTIRM, SEM/EDS oraz XPS.
PL
Zbadano reakcje kopolimeru S/MA z aminopirydyną i jej metalowymi pochodnymi prowadzoną w roztworze acetonowym, z utworzeniem terpolimeru styren/kwas pirydylomalamowy/bezwodnik maleinowy, w którym statystycznie podstawieniu odpowiednią aminopirydyną ulegają dwa mery na każde trzy mery kopolimeru S/MA. Otrzymane produkty tworzą batwne kompleksy z octanem miedzi (II), mające stabilność barwy do temperatury ok. 150°C. Wykazują one 4 lub 5 koordynacyjne otoczenie jonu miedzi (II) o mieszanym chromoforze CuNxOy.
EN
Copolymer S/MA reacts with aminopyridine and its methyl derivatives in acetone at room temperature to give terpolymer: styrene/ pyridinemalamic acid/maleic anhydride. Two mers in each 3 mers of S/MA copolymer were substituted most often. The resulting products formed color complexes with cooper (II) acetate. The stability of color were observed up to 150 °C. The analysis of the electronic spectra of the complexes showed that they are 4 or 5 coordinate with the CuNxOy.
PL
Otrzymano pięć soli kompleksowych pochodnych chloranu(VII) miedzi(II) z ligandami, będącymi pochodnymi 1,2,4-triazolu. Wykonano widma w podczerwieni otrzymanych związków, potwierdzając w ten sposób uzyskanie soli złożonych. Przeprowadzono badania ich wrażliwości na tarcie i ogrzewanie przeponowe oraz na impuls promieniowania laserowego (ʎ=1,06 µm). Stwierdzono, że dwa spośród otrzymanych kompleksów są inicjującymi materiałami wybuchowymi o względnie małej wrażliwości na bodźce mechaniczne i termiczne a jednocześnie mogą być pobudzone do detonacji impulsem promieniowania laserowego o małej gęstości energii. W odpowiedzi na bidziec od zespołu ogniowego zapalnika elektrycznego detonują w ładunku o masie 0,2 g. generując falę uderzeniową o intensywności wystarczającej do zainicjowania detonacji w pentrycie.
EN
Five co-ordination compounds being complexes of copper(II) perchlorate with two molecules of derivatives of 1,2,4-triazole as ligands were obtained. The infrared absorption spectra of the compounds were taken and used to confirm their complex structure. Research on the complexes' sensitivity to mechanical, thermal and laser stimuli were also carried out. On the basis of the results, it was stated that two out of five compounds synthesized were primary explosives. They have comparatively low sensitivity to thermal and mechanical stimuli, however they can be initiated with low-energy laser radiation pulse (ʎ=1.06 µm, E = 0.05 J/cm²}. In response to fire from a firing mechanism, they detonate in charges of 0.2 g in mass, generating shock waves that are able to initiate the-detonation in PETN.
PL
Przeprowadzono syntezę oraz badania derywatograficzne kompleksów jonów Pr(III), Nd(III), Eu(III), Gd(III), Dy(III), Er(III) z kwasem kwercetyno-5'sulfonowym i wyznaczono ich energię aktywacji (Ea) reakcji dehydratacji. Stwierdzono, że kompleksy prazeodymu, neodymu, gadolinu i erbu mają większe warto­ści energii aktywacji niż kompleksy europu i dysprozu.
EN
Thermogravimetric analysis complexes of Pr(III), Nd(III), Eu(III), Gd(III), Dy(III) and Er(III) ions with quercetin-5'-sulfonic acid were carried out. Activation energy (Ea) reaction of dehydration was appointed. It was stated, that complexes of praseodymium, neodymium, gadolinium and erbium had higher values of activation energy than complexes of europium and dysprosium.
17
PL
Praca zawiera przegląd i krótką charakterystykę metod wyznaczania fizykochemicznych parametrów reakcji kompleksowania. Szczególną uwagę poświęcono metodom wyznaczania wartości stałych trwałości związków kompleksowych. Klasyfikacji metod wyznaczania wartości stałych trwałości dokonano w oparciu o stosowane techniki pomiarów eksperymentalnych. Ocenę metod numerycznych dokonano w oparciu o rodzaj użytej metody analizy matematycznej dla opracowania sygnałów zmian energetycznych zachodzących podczas procesu kompleksowania. Zwrócono uwagę na znane programy komputerowe stosowane do matematycznych symulacji wartości teoretycznej stałej trwałości na podstawie danych parametrów wyjściowych roztworów poddanych analizie chemicznej.
EN
In the paper contained review and simple characteristic of the methods for the physico-chemical parameters in the complexation reactions. Called special consideration to calculated values stability constants of the complexes. Classific analysis calculate values stability methods achieve of the appoint used of the experimental technics in the measurement. Estimation numerical methods achieve of the appoint used of the mathematical analysis methods in elaborate experimental values signals of the values energetic change. Pay attention to know computation programs using at the symulation theoretical values stability constants on the ground of values particulars parameters from starting solution put to trial chemical experiment.
18
Content available remote Wokół problemu biologicznego znaczenia chromu
PL
(...) Celem niniejszej pracy jest zestawienie różnych, często bardzo odmiennych poglądów dotyczących własności biologicznych chromu. Bez wątpienia najwięcej miejsca zajmą tu rozważania nad rolą Cr(III) w GTF, ale to właśnie czynnik tolerancji glukozy dostarczał najwięcej emocji w ciągu ostatnich 40 lat. Mamy nadzieję, że ta przeglądowa praca, stanowiąca podsumowanie wieloletnich badań prowadzonych w wielu laboratoriach, będzie bodźcem do zainteresowania się biologiczną rola związków chromu.
EN
Chromium was discovered in 1797 by Louis Nicolas Vauqelin, a French chemist. The element has valences that range from (-2) to (+6). Under environmental conditions chromium in compounds exists in the trivalent and hexavalent state. Chromium was recognized as an essential trace element in 1959. The essentiality of Cr(III) was established examining rats fed a Torula yeast diet which proved to be Cr-deficient. Rats developed glucose intolerance which could be reversed only by addition of Cr(III) to the diet. Chromium deficiency in humans results in symptoms comparable to those associated with diabetes and cardio-vascular diseases. (...) In conclusion, it appears very likely that four decades of intensive research on biological chromium resulted in finding the answer to the question on the essentiality of this element. The 'new GTF', i.e. the active chromium containing species, primarily functions as the activator of insuline receptors whereas the 'old GTF' may serve rather as a readily absorbed chromium dietary supplement.
PL
W niniejszej pracy przedstawiono badania dotyczące wpływu związków kompleksowych (CuIIEDTA, NiIIEDTA, PbIIEDTA, ZnIIEDTA) na proces denitryfikacji w zalewanych złożach biologicznych. Czas trwania doświadczenia wynosił 72 dni. Reaktory termostatowano w temperaturze 298 K. Stężenie azotu azotanowego w dopływach do złóż wynosiło 20 mg N-NO3/dm3, fosforu 1 mg P-PO4/dm3, a kompleksy kationowe zwiększano od 1 do 100 mg/dm3. Złoża po zaszczepieniu i ustabilizowaniu się procesu pracowały efektywnie przez cały czas trwania eksperymentu, a procent usunięcia azotu całkowitego wahał się w przedziale od 96,0 do 99,8%. Procent obniżania zawartości węgla organicznego zmieniał się w zakresie od 62,5 do 81,6%. Stosunek usuniętego węgla organicznego do usuniętego azotu całkowitego wynosił około jeden.
EN
In the presented study it was shown the research concerning the effect of complex compounds (CuIIEDTA, NiIIEDTA, PbIIEDTA, ZnIIEDTA) on denitrification process in submerged biological beds. The period of experiment was 72 days. Reactors were thermostated at temperature 298 K. A concentration of nitrates in inflow to beds amounted 20 mg N-NO3/dm3, phosphorus concentration was 1 mg P-PO4/dm3 and cationic complexes were presented in increasing concentrations from 1 to 100 mg/dm3. Beds after inoculation and stabilisation of the process worked efficiently all time during the experiment and the percentage of total nitrogen removal varied in the range from 96,0 to 99,8%. The percentage of organic carbon reduction was observed from 62,5 to 81,6%. The ratio of removed carbon to removed total nitrogen was about 1.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.