Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 17

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  gas-liquid system
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
The influence of impellers system and type of liquid on the gas hold-up in the vessel has been presented in this paper. The analysis of gas hold-up was conducted on the basis of the data obtained in the vessel of the diameter D = 0.288 m, where the vessel was filled by a liquid up to the height H = 2D. The vessel was equipped in 24 vertical tubular baffles located on the circuit and two high-speed impellers situated on a shaft. Five different configurations of high-speed impellers were employed. The experiments in the gas-liquid system were conducted for setups which differed in capability of gas bubbles coalescence. The results of the experiment of the gas holdup for the five impellers configurations and four gas-liquid systems were presented in the graphic form and they were described mathematically.
PL
Przedstawiono wyniki badań dotyczących hydrodynamiki przepływu układu gaz-ciecz w rurze poziomej wypełnionej pianą metalową. Podczas badań mierzono opory przepływu układu powietrzewoda na odcinku rury wypełnionej pianą metalową. Otrzymane wyniki pomiarów porównano z wartościami oporów przepływu obliczonymi zgodnie z modelami zarówno powszechnie uznanymi dla przepływu układów dwufazowych w pustej mrze, jak i odnoszącymi się do ich przepływu przez ośrodki porowate. Analiza zmierzonych i obliczonych wartości oporów przepływu dała podstawę do oceny wpływu obecności piany metalowej w rurze na hydrodynamikę przepływu układu gaz-ciecz.
EN
Measurements results related to the hydrodynamics of gas-liquid system flow are presented. During the research, the pressure drop of air-water system flow through a pipe section filled with metal foams was measured. The obtained results were compared with pressure drop values calculated according to commonly recognized models for twophase flow through an empty pipe as well as models relating to twophase flow through porous media. The analysis of measured and calculated pressure drop values led to the assessment of influence of metal foam presence in a pipe on two-phase flow hydrodynamics.
PL
Badania miały na celu określenie wpływu wybranych parametrów (natężenia przepływu gazu, częstości obrotów mieszadła, stężenia wodnego roztworu sacharozy oraz konfiguracji mieszadeł) na udział gazu zatrzymanego w cieczy dla układu gaz-ciecz. Badania wykonano w mieszalniku o średnicy 0,288 m z dwoma mieszadłem szybkoobrotowym. Wyniki badań opracowano w postaci równania. Na podstawie przeprowadzonych pomiarów stwierdzono, że udział gazu zatrzymanego w cieczy silnie zależy od natężenia przepływu gazu oraz stężenia sacharozy w wodnym roztworze.
EN
Studies of different param eters influence (gas flow rate, impeller speed, sucrose concentration in aqueous solution and configuration of impellers) on the gas hold-up for gas-liquid systems are presented in the paper. Measurements were conducted in a vessel of diameter equal to 0.288 m, equipped with two high-speed impellers. The results of experiments were described by the equation. The study shows that gas hold-up strongly depends on the gas flow rate and sucrose concentration in aqueous solution.
PL
Przedstawiono badania mieszania układu ciecz-gaz w mieszalniku zaopatrzonym w zmodyfikowane mieszadło BT-6. Analizowano zapotrzebowanie mocy mieszania, stopień zatrzymania gazu oraz objętościowy współczynnik wnikania masy. Dla układów gaz-ciecz przebieg zmian względnej mocy mieszania był porównywalny z mieszadłem BT-6, jednakże spadek mocy mieszania był większy. W pracy zaproponowano również równania korelacyjne opisujące zmiany stopnia zatrzymania gazu oraz objętościowego współczynnika wnikania masy.
EN
The paper presents study results of gas-liquid mixing in a standard vessel equipped with the asymmetric BT-6 impeller. The power requirements, gas hold-up and volumetric mass transfer coefficient were examined. The results indicate that the relative power demand as a function of gas flow number is similar to the BT-6 impeller, although the power drop is greater. The new equations for gas holdup and volumetric mass transfer coefficient were proposed.
PL
Przedstawiono wyniki analizy wpływu skali aparatu (średnicy mieszalnika) na wartość współczynnika wnikania masy kLa (proces transportu tlenu między gazem a cieczą). W oparciu o szeroki zbiór danych: dwa mieszalniki różniące się 10-krotnie objętością roboczą, trzy mieszadła oraz sześć wartości strumienia gazu określono wpływ średnicy mieszalnika na kLa, przy stałej pozornej prędkości gazu wog albo parametru vvm (określającego strumień gazu liczony w m3/min. odniesiony do m3 cieczy). Opracowano zależność do obliczania współczynnika kLa w układzie ciecz-gaz.
EN
The analysis results of the effect of agitated vessel scale (its diameter) on the volumetric mass transfer coefficient (gas – liquid mass transfer process) are presented in this paper. A wide range of data: two agitated vessels differ ten times in working liquid volume, three agitators and six volumetric gas flow rates, enabled one to determine the diameter effect on kLa, assuming a constant value of superficial gas velocity, wog, or vvm parameter (describing gas flow rate in m3/min per m3 of liquid phase). The correlations for kLa calculation were elaborated.
PL
Badano mieszanie układu ciecz-gaz w mieszalniku bez przegród zaopatrzonym w mieszadło A310 wykonujące ruch nieustalony. Analizowano zapotrzebowanie na moc mieszania, stopień zatrzymania gazu oraz objętościowy współczynnik wnikania masy. Uzyskane wyniki wskazują, że zastosowanie mieszania nieustalonego powoduje intensyfikację wymiany masy. Wartości współczynnika kLa dla mieszania nieustalonego są od 1,33 do 1,85 razy większe. Uzyskane wyniki pokazują również większy stopień zatrzymania gazu w porównaniu do mieszania standardowego, a także większe zapotrzebowanie na moc mieszania.
EN
Gas-liquid mixing in a vessel equipped with the unsteadily rotating A310 impeller was investigated. The power requirements, gas hold-up and the volumetric mass transfer coefficient were examined. The results indicate that the use of unsteady mixing intensifies mass transfer process. The values of kLa for unsteady mixing were from 1.33 to 1.85 times greater than for the standard mixing. The results also indicate a higher degree of gas hold-up and greater power requirements in comparison to the standard mixing.
7
Content available remote Power characteristics of unsteadily rotating Rushton turbine in aerated vessel
EN
The paper presents an analysis of power requirements for unsteadily rotating Rushton turbine in an aerated vessel. The experiments have shown that the presence of gas phase in liquid results in reduction of power requirements. The effect of oscillation frequency on power requirements for F1 mixing mode was not observed while for FR mode power requirement was inversely proportional to oscillation frequency. The lowest relative power demand (RPD) was equal to 0.49, and the overall power requirements for unsteady mixing modes were higher in comparison to standard unidirectional mixing mode.
PL
W artykule przedstawiono analizę mocy mieszania turbiny Rushtona obracającej się ze zmienną częstością i kierunkiem obrotów. Zgodnie z oczekiwaniami obecność gazu sprzyja zmniejszeniu zapotrzebowania na moc. Dodatkowo analizowano wpływ częstotliwości zmian częstości obrotów. Stwierdzono, że wpływ ten jest uzależniony od charakteru nieustalonego ruchu mieszadła. W przypadku zmiennej częstości i kierunku obrotów mieszadła moc mieszania była odwrotnie proporcjonalna do częstotliwości oscylacji. Z kolei przy zachowaniu tego samego kierunku obrotów mieszadła nie odnotowano wpływu częstotliwości na moc mieszania.
PL
Przedstawiono wyniki badań doświadczalnych procesu napowietrzania cieczy. Celem badań było określenie ilości gazu zatrzymywanego w cieczy oraz nakłady energetyczne dla układu dwufazowego roztwór poliakrylo- amidu - powietrze i różnych systemów napowietrzających w postaci 3 dyfuzorów membranowych. Na podstawie przeprowadzonych badań można stwierdzić, że najlepsze efekty daje zastosowanie dyfuzora o możliwie największej powierzchni. W tym przypadku był to dyfuzor HD 270. Charakteryzuje go nie tylko najwyższy stopień zatrzymywania gazu w cieczy, lecz również najlepszy stosunek pobieranych mocy jednostkowych do stopnia napowietrzenia układu.
EN
Experimental results of aeration process are presented in the paper. In the studies several tests aiming at the determination of gas hold-up and energy input for Polyacrylamide aqueous solution - gas and three membrane aera-tors were carried out. It can be stated, on basis of experimental data, that the best effects were obtained for the diffuser of possible largest area. In this instance it was the HD 270 diffuser. The device gave the highest gas hold-up values in liquid and the best ratio of unit energy input and gas hold-up.
PL
W pracy przedstawiono wyniki badań doświadczalnych udziału objętościowego gazu w przepływie dwufazowym powietrze - woda przez poziomy kanał wypełniony pianką aluminiową (40 PPI). Przeprowadzona ocena statystyczna metod obliczania udziału objętościowego gazu w mieszaninach gaz-ciecz wskazuje, że nie pozwalają one z zadowalającą dokładnością przewidywać wartości udziałów objętościowych faz w kanałach wypełnionych. Najlepszą zgodność danych eksperymentalnych z obliczonymi otrzymano wykorzystując model GE RAMP oraz Zubera-Findlaya.
EN
Experimental results dealing with gas void fractions under conditions of two-phase air-water flow through a horizontal pipe packed with aluminium metal foam (40PPI) are presented in the paper. A statistical evaluation of methods used for the calculation of gas void fraction in gas-liquid mixtures indicated incapability of predicting such values in packing channels with acceptable accuracy. The best agreement between the experimental and calculated gas void fraction values was obtained using the GE RAMP and Zuber-Findlay models.
EN
The aim of experimental studies was to investigate mass transfer process in a gas - liquid system agitated using two impellers. The volumetric gas — liquid mass transfer coefficients ku, were measured tor two systems of high-speed impellers (Kushton turbine - A 315 and Rushton turbine - Smith turbine) operating in a tall vessel of diameter equal to D = 0.288 m. The k Lo, coefficient was determined by the dynamic method.
PL
Celem pracy była analiza eksperymentalna procesu wymiany masy w układzie ciecz-gaz mieszanym w zbiorniku z dwoma mieszadłami na wspólnym wale. Pomiary przeprowadzono w zbiorniku o średnicy D = 0.288 m. dla dwóch konfiguracji mieszadeł. W obu jako górne stosowano mieszadło turbinowe Riishlona. a jako dolne turbinowe Smilha lub A 315. Pomiary współczynnika ku, przeprowadzono metodą dynamiczna.
EN
Local diameters of bubbles produced during gas - liquid mixing in a vessel equipped with two Rushton turbines were measured. The diameter distributions of bubbles were approximated by the gamma distribution. The changes of distribution parameters with a radius and height of the vessel were analysed.
EN
The experimental studies dealing with the power consumption and gas hold-up in a stirred tank equipped with the single or dual high-speed impellers are presented. The results for different configurations of impellers situated on the shaft were compared. The influence of the diameter and configuration of impellers on the gas distribution into liquid was evaluated.
EN
Hydrodynamics of two-phase gas - liquid and liquid - liquid helicoidal flow has been presented. Experimental and numerical study of such flow was carried out.
EN
Investigation results of gas hold-up in the air-lift reactor with inner or reversed circulation are presented in the paper. Gas was supplied to the air-lift reactor system by the ring sparger. Measurements were conducted for coalescing and non-coalescing gas-liquid systems. The results were elaborated mathematically (Eq.(1))).
PL
W pracy przedstawiono wyniki badań mocy mieszania w układzie ciecz — gaz i zawartości gazu w cieczy w smukłym mieszalniku z dwoma mieszadłami na wspólnym wale. Mieszadła CD 6 lub A 315 były umieszczone w pozycji dolnej, a mieszadło turbinowe tarczowe Rushtona - w pozycji górnej. Wyniki pomiarów aproksymowa-no równaniami.
EN
The results of studies on the power consumption for the gas -liquid system and gas hold - up in the slender agitated vessel equipped with dual impellers are presented in the paper. The CD 6 or A 315 impellers were located at the lower position, whereas the Rushton disc turbine was working as the upper impeller. The results of the measurements were approximated analytically.
PL
Omówiono wybrane zagadnienia dotyczące hydrodynamiki przepływu dwufazowego, mocy mieszania oraz wymiany ciepła i masy w układzie ciecz — gaz, mieszanym w zbiorniku z mieszadłem szybkoobrotowym. Zebrano i przeanalizowano dostępne w literaturze przedmiotu równania przydatne do obliczeń projektowych aparatów z mieszadłem, w których wytwarzana jest mieszanina ciecz — gaz.
EN
Selected topics dealing with two-phase hydrodynamics, mixing power, heat and mass transfer in a gas—liquid system encountered in tank equipped with high-speed mixer have been discussed. The equations, available in professional literature and useful in designing of mixers, in which gas-liquid mixture is formed, have been collected and analysed. Key words: gas-liquid system, high—speed mixer, mixing
PL
W pracy analizowano wpływ skali mieszalnika na wielkość powierzchni międzyfazowej i średnicy d-j2 pęcherzyków gazu w układzie ciecz-gaz. Do obliczeń wykorzystano wyniki doświadczalnych badań mocy mieszania i zawartości gazu w cieczy otrzymanych dla mieszalnika z dwoma mieszadłami turbinowymi tarczowymi. Zakładając stałe wartości Wog lub vvm, porównano wyniki obliczeń dla dwóch mieszalników o objętości cieczy 0,0375 m3 lub 0,4 m3.
EN
The effect of the scale -up of an agitated vessel on the interfacial surface area and the diameter ds2 of the gas bubbles in a gas liquid system was analysed in the paper. The results of the studies on the power consumption and gas hold - up obtained for the agitated vessel equipped with double Rushton turbines were used for the calculations. Assuming the constant values of the Wag or vvm the results of the calculations were compared for the agitated vessels with the working volume of 0.0375 m3 or 0.4 m3. Key words: agitation, gas - liquid system, interfacial surface area, scale - up.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.