Wyniki wyszukiwania - BazTech

1

Combustion stability for early and late direct hydrogen injection in a dual fuel diesel engine

Siadkowska Ksenia, Barański Grzegorz

Combustion Engines

|

2024

|

R. 63, nr 1

89--98

EN

The paper presents an analysis of the experimental results of direct hydrogen injection in a dual-fuel diesel engine. The test object is a four-cylinder, four-stroke ADCR engine. The parameters like: indicated mean effective pressure, peak pressure, angle of maximum pressure and released heat were analyzed. Statistical analysis of the obtained results was carried out for each cylinder separately for four different hydrogen doses. Both early and late direct hydrogen injection were analyzed. The significance of the differences for each of the analyzed parameters and type of injection was determined. The stability of the combustion process was evaluated using the coefficient of variation CoV(IMEP).

2

Experimental Investigation on Indicated Pressure and Heat Release for Direct Hydrogen Injection in a Dual Fuel Diesel Engine

Siadkowska Ksenia, Barański Grzegorz, Sochaczewski Rafał, Wendeker Mirosław

Advances in Science and Technology. Research Journal

|

2022

|

Vol. 16, no 3

54--66

EN

This paper presents the research results for a diesel and hydrogen fueled engine. The research object is a four-cylinder, four-stroke ADCR engine with a displacement of 2,636 cm3. In the experiments, glow plugs were replaced with compressed hydrogen injectors and a special adapter. Hydrogen was supplied directly into a combustion chamber using a test injector. A hydrogen dose in the tests was changed at selected test points and ranged from 0 to 160 dm3/min. The research were conducted at 1,500 rpm. A hydrogen injection start angle and maximum hydrogen dose were specified from the preliminary experiments. The following parameters were analyzed: indicated mean effective pressure, maximum pressure, crank angle of maximum cylinder pressure occurrence and heat release. The obtained results were statistically analyzed. The conducted analysis focused on determining whether there are significant differences between early and late injection and how these changes affect the measured parameters.

3

Simulation model of combustion engine with direct injection of hydrogen

Blažek J., Brabec P.

Journal of KONES

|

2009

|

Vol. 16, No. 3

15-21

EN

Fuel mixture formation inside a cylinder has become used more frequently in spark ignition engines in recent years. gas internal combustion engines can also benefit from this concept as direct injection into an engine 's cylinder during the compression stroke not only increases its volumetric efficiency but also eliminates adverse anomalies in the combustion process. This paper focuses on the development of a simulation model for a spark ignition engine with direct hydrogen injection into a cylinder. The Wave software was used for the simulation. A part of the paper depicts the model's verification. The study utilized a three-cylinder internal combustion engine with the total cylinder volume of 1.2 dm3. The concept of the engine is based on new, high-pressure injectors with 10 MPa inlet pressure (gas-hydrogen injection directly into the engine cylinder). Utilization of internal fuel mixture formation can be beneficial due to its enabling the control of the combustion process and gaseous emission generation. From the viewpoint of the engine's design, however, internal fuel mixture utilisation is more complicated as injectors have to be built into the cylinder head. The actual engine construction is housed in laboratories of the Technical University of Liberec, Department of Vehicles and Engines.