Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 Archives of Civil and Mechanical Engineering

2 2020

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych: bond behavior

Sortuj według:

Ogranicz wyniki do:

Identification of bond behavior between FRP/steel bars and self-compacting concrete using piezoceramic transducers based on wavelet energy analysis

Zhou Lingzhu, Zheng Yu, Ii Haotian, Song Gangbing

Archives of Civil and Mechanical Engineering

2020

Vol. 20, no. 2

96--111

The civil infrastructures constructed using self-compacting concrete (SCC) reinforced with fiber-reinforced polymer (FRP) bars are advocated for engineering applications due to corrosion resistance and environmental-friendly performance. The bond behavior between FRP reinforcement and SCC is a significant factor affecting the serviceability and failure mechanism of this composite structure. However, it is hard to identify the damage mechanism and failure mode of the interface bond using the traditional test methods. Therefore, an effective monitoring method of interface damage using piezoceramic transducers is proposed in this paper. A series of pull-out tests were performed, and the test variables involved concrete materials and reinforcing bar types. A lead zirconate titanate (PZT) patch transducer acting as an actuator was bonded on the outer surface of reinforcing bars, and a piezoceramic smart aggregate transducer acting as a sensor was embedded in the SCC. A wavelet energy ratio index (WERI) is proposed to identify the damage mechanism of interface between reinforcing bars and SCC. The experimental test results reveal that the damage mechanism and failure mode of the bond between different reinforcing bars and concrete materials can be identified effectively and the peak of bond stress can be captured accurately by using WERI values.

Bond behavior of steel fiber-reinforced mortar (SFRM) applied onto masonry substrate

Zampieri Paolo, Simoncello Nicolò, Libreros Jaime Gonzalez, Pellegrino Carlo

Archives of Civil and Mechanical Engineering

2020

Vol. 20, no. 3

409--428

Masonry was the most used material during the last centuries to build constructions. Most of the existing masonry structures (buildings, bridges, etc.) were built without considering some important structural considerations that are important nowadays. Moreover, due to factors such as the increasing of service loads, materials aging, structural damage, etc., the existing masonry structures require strengthening interventions. The definition of optimal strengthening strategies using traditional and innovative materials is still an important issue of the scientific research. In fact, during the last decade, many researchers focused their attention studying innovative composites materials, such as fiber-reinforced polymers and fiber-reinforced cementitious matrix composites, for the strengthening of existing masonry structures. This research has focused on aspects such as the bond behavior between the substrate and the composite materials, the structural behavior of the strengthened masonry and concrete structures, and the compatibility and reversibility of these materials when bonded to existing substrates. In this study, the bond behavior of a composite material known as steel fiber-reinforced mortar (SFRM), recently used as for the strengthening of existing structures, applied onto masonry structures is analyzed experimentally and numerically. First, the material is characterized experimentally with the aim of getting insight on its behavior and applicability when applied as an innovative technique for the strengthening of masonry and to obtain mechanical parameters required for the numerical models. Mechanical properties of the SFRM studied included flexural and compressive strength, tensile strength, and residual flexural strength. The SFRM bond behavior on masonry substrates was evaluated by means of double shear lap tests. In addition, the experimental tensile and bond behavior of the SFRM is studied numerically through finite-element models validated using the results obtained during the experimental tests. Results show that if an adequate bonded length is provided, the SFRM can fully develop its tensile strength as detachment from the substrate is not observed.