Archives of Civil and Mechanical Engineering - Tom Vol. 20, no. 2 (2020) - BazTech - Yadda

Tom - szczegóły

Tytuł artykułu

Vol. 20, no. 2

Czasopismo

Archives of Civil and Mechanical Engineering

Wydawca

Springer
Wrocław University of Science and Technology

Rocznik

2020

Identyfikatory

Zawartość wolumenu

Vol. 20, no. 2
- artykuł: Cyclic behavior of strong beam–weak column joints strengthened with different configurations of CFRP sheets (Ilia Elaheh, Mostofinejad Davood, Moghaddas Amirreza), s. 1--26
- artykuł: Investigation on self‑healing of neat and polymer modified asphalt binders (Wang C., Xue L., Xie W., Cao W.), s. 27--36
- artykuł: Investigating the combination effect of warm extrusion and multi-directional forging on microstructure and mechanical properties of Al–Mg2Si composites (Sharifzadeh M., Shaeri M. H., Taghiabadi R., Mozaffari F., Ebrahimi M.), s. 37--47
- artykuł: A critical review of 3D printing in construction: benefits, challenges, and risks (El‑Sayegh S., Romdhane L., Manjikian S.), s. 48--72
- artykuł: On the go-and-stop motion of the discontinuous precipitation front (Chronowski M., Zięba P.), s. 73--79
- artykuł: Finite element model and test results for punching shear failure of RC slabs (Lewiński Paweł, Więch Przemysław P.), s. 80--95
- artykuł: Identification of bond behavior between FRP/steel bars and self-compacting concrete using piezoceramic transducers based on wavelet energy analysis (Zhou Lingzhu, Zheng Yu, Ii Haotian, Song Gangbing), s. 96--111
- artykuł: Low-velocity impact performance of UHMWPE composites consolidated with carbide particles (Gürgen Selim), s. 112--123
- artykuł: Delamination analysis in single-point incremental forming of steel/steel bi-layer sheet metal (Hassan M., Hussain G., Ilyas M., Ali A.), s. 124--137
- artykuł: Seismic behavior of corroded reinforced concrete column joints under low-cyclic repeated loading (Luo Xiaoyong, Cheng Junfeng, Xiang Ping, Long Hao), s. 138--157
- artykuł: Application of nanoindentation to evaluate the hardness and yield strength of brass joints produced by FSW: microstructural and strengthening mechanisms (Heidarzadeh A., Paidar M., Güleryüz G., Barenji R. Vatankhah), s. 158--166
- artykuł: Sustainable manufacturing: re-contouring of laser cladding restored parts by machining method with cutting energy management (Zhang Peirong, Du Jin, Zhou Tingting, Su Guosheng, Huang Weimin, Liu Zhanqiang), s. 167--176
- artykuł: Microstructure, mechanical properties and corrosion behavior of austenitic stainless steel sheet joints welded by gas tungsten arc (GTA) and ultrasonic–wave–assisted gas tungsten pulsed arc (U–GTPA) (Xie Weifeng, Yang Chunli), s. 177--190
- artykuł: Experimental study on seismic performance of double-level yielding buckling-restrained braced concrete frames (Zhang Zhe, Zhang Sheng-Nan, Deng En-Feng, Zhou Tong-Tong, Yi Yu, He Hao, Li Na-Na), s. 191--206
- artykuł: Nonlinear coupled moving-load excited dynamics of beam-mass structures (Ghayesh M. H., Farokhi H., Zhang Y., Gholipour A.), s. 207--217
- artykuł: Spacing and bundling effects on rate-dependent pullout behavior of various steel fibers embedded in ultra-high-performance concrete (Kim Jae-Jin, Yoo Doo-Yeol), s. 218--235
- artykuł: Research on temperature action and cracking risk of steel–concrete composite girder during the hydration process (Liu Jiang, Liu Yongjian, Zhang Ning, Ma Zhiyuan, Bai Yongxin), s. 236--256
- artykuł: On size-dependent large-amplitude free oscillations of FGPM nanoshells incorporating vibrational mode interactions (Yi Hongwei, Sahmani Saeid, Safaei Babak), s. 257--279
- artykuł: Ultimate shear response of ultra-high-performance steel fibre-reinforced concrete elements (Tibea C., Bompa Dan V.), s. 280--295
- artykuł: In vitro evaluation of degradable electrospun polylactic acid/bioactive calcium phosphate ormoglass scaffolds (Majchrowicz Anna, Roguska A., Krawczyńska A., Lewandowska M., Martí‑Muñoz J., Engel E., Castano O.), s. 296--306
- artykuł: Sheet metal forming using environmentally benign lubricant (Więckowski Wojciech, Adamus Janina, Dyner Marcin), s. 307--319
- artykuł: A mathematical model for determining and improving rollover stability of four‑wheel earthmoving vehicles with arbitrary undercarriage system design (Sierzputowski G., Dudziński P.), s. 320--338
- artykuł: Investigation of strain rate sensitivity of Gum Metal under tension using digital image correlation (Golasiński Karol, Pieczyska Elżbieta, Maj Michał, Staszczak Maria, Świec Paweł, Furuta Tadahiko, Kuramoto Shigeru), s. 339--352
- artykuł: Finite element investigation of IGSCC-prone zone in AISI 304L multipass groove welds (Taraphdar P. K., Pandey C., Mahapatra M. M.), s. 353--365
- artykuł: Numerical and experimental study on high-speed nailing process for aluminum/steel structures induced by electromagnetic impact (Cui Junjia, Li Bingkun, Jiang Hao, Li Guangyao), s. 366--379
- artykuł: Flexural performance of concrete beams reinforced with steel-FRP composite bars (Ge Wenjie, Wang Yanming, Ashour Ashraf, Lu Weigang, Cao Dafu), s. 380--396
- artykuł: Production and investigation of mechanical properties and electrical resistivity of cement-matrix nanocomposites with graphene oxide and carbon nanotube reinforcements (Najafishad S., Manesh H. D., Zebarjad S. M., Hataf N., Mazaheri Y.), s. 397--409
- artykuł: Enhancement on mechanical and durability performances of binary cementitious systems by optimizing particle size distribution of fly ash (Filazi Ahmet, Demir Ilhami, Sevim Ozer), s. 410--422
- artykuł: Seismic response investigation and analytical model of light polymer material-filled CFS shear walls (Wang Wanqian, Wang Jingfeng, Guo Lei, Shen Qihan), s. 423--436
- artykuł: The effect of in vitro corrosion on the mechanical properties of metallic high strength biodegradable surgical threads (Milenin Andrij, Kustra Piotr, Byrska-Wójcik Dorota, Wróbel Mirosław, Paćko Marek, Sulej‑Chojnacka Joanna, Matuszyńska Sława, Płonka Bartłomiej), s. 437--452
- artykuł: Thermal defect characterization and heat conduction modeling during fiber laser cutting carbon fiber reinforced polymer laminates (Chen Limei, Li Maojun, Yang Xujing, Li Bin), s. 453--466
- artykuł: Modeling, simulation, and validation of a TB41 crash test of the H2/W5/B concrete vehicle restraint system (Pachocki Ł., Bruski D.), s. 467--489
- artykuł: Development of a new hexagonal honeycomb steel damper (Javanmardi Ahad, Ghaedi Khaled, Ibrahim Zainah, Huang Fuyun, Xu Pu), s. 490--508

rozwiń roczniki

JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.