Steam turbines for supercritical power plants - design and operation problems

• Autorzy: Chmielniak T. J. , Kosman G.
• Języki publikacji: EN

Abstrakty

EN

This paper regards design issues of large power output steam turbines for supercritical power plants. A special focus is set on features of turbine cycles, their parameters as well as on aerodynamical, material and strength problems. The second part of the paper presents an operation diagnostics system, which regards monitoring of stresses.

Słowa kluczowe

EN

steam turbines; Supercritical stem parameters; design; operation

• Wydawca: Wydawnictwo Instytutu Maszyn Przepływowych PAN
• Czasopismo: Transactions of the Institute of Fluid-Flow Machinery
• Rocznik: 2003
• Tom: nr 113
• Strony: 5--24
• Opis fizyczny: Bibliogr. 26 poz., rys., wyrk.

Twórcy

autor

Chmielniak T. J.

• Silesian University of Technology, Institute of Power Engineering and Turbomachinery, Konarskiego 18,44-100 Gliwice, Poland

autor

Kosman G.

• Silesian University of Technology, Institute of Power Engineering and Turbomachinery, Konarskiego 18,44-100 Gliwice, Poland

Bibliografia

• [1] Zabłocki W.: Power Units with Supercńtical Boilers for Modernisation and, Deuelopments Polish Power Plants, Komitet Problemów Energetyki PAN, Jabłonna 2003.
• [2] Magagnato F.: The modelling of unsteady turbulent flows in turbomachines, TASK Quartely 5, 4,2001.
• [3] Lakshminarayana B.: Fluid Dynamics and Heat Transfer of Turbomachinera, J. Wiley and Sohn Inc., New York 1996.
• [4] Galmes J.M,, Lakshiminarayana B.: Turbulence modelling for thrcedimensional turbulent shear flows ouer curved rotating bodies, AIAA J,, Vol. 22 (1984), No. 1
• [5] Lao J., Lakshiminarayana B.: Navier-Stokes analysis of turbine flow field and heat transfer, J. Propulsion and Power, Vol. 11 (1995), 2.
• [6] Sturmaye A., Hirsh Ch.: Tabular IAPWS-95 steam properties formulation with switched, condensation model in a 3D Navier-Stokes soluer, Proc. 5th Europ. Conf. on Turbomachinery (M. Śt,astny C. H. Sieverding, G. Bois, Eds.), 729,2003.
• [7] Bohn D.E., Surken N.: Nucleation phenomena ,in a multi-stage low preasure steam turbine, ibid, 741.
• [8] Chmielniak T., Wróblewski W., Dykas S,: Steam flow calculations ,in turbine channels, Third European Conf. on Turbomachinery, 1999, Paper C557/123/99.
• [9] Dykas S., Wróblewski W,, Chmielniak T.: Numerical research on the flow through the last rotor of LP steam turbine, 5'h Europech Fluid Mech. Conf., Toulouse 2003.
• [10] Magagnato F.: Investigations of Linear and Non-linear Turbulence Models, Dissertation, TH - Darmstadt, 1995 (in German)
• [11] Retzlaff K., Ruegger W,: Steam turbines for aduanced ultrasupercrtiticalpouer plants ,in Europe, Power Gen. Conf., Budapest 1996.
• [12] Neft H.G., Franconville G.: New steam turbines design for higher inlet parameters and, longer blades VGB Kraftwerkstechnik 73, 5, 1993 (in German)
• [13] Trasl W.: Steam turbines of the future, VGB Kraftwerkstechnik 68, B, 1988 (in German).
• [14] Mayer K.H., Bendick W., Husemann R,U., Kern T., Scarlin R.B,: New materials for fossil-fired thermal power staions, VGB PowerTech 1/9B.
• [15] Berger Ch., Mayer K.H., Scalin R.B.: Turbine design with new steals for high steam parameters. VGB Kraftwerkstechnik 74 (1994), Heft 4 (in German)
• [16] Tachibana-wan unit 2 takes a supercritical stepp forward for Japan, Modern Power Systems, November 2001.
• [17] Kosman G., Rusin A.: The influence of the start-ups and cyclic loads of steam turbnes conducted according to European standards on the components life. The Int. J, of Energy, 26 (2001,),1083-1099.
• [18] Chmielniak T., Kosman G: Thermal Loads of Steam Turbines Components, WNT, Warszawa 1990 (in Polish)
• [19] Kosman G., Rusin A.: The model and algorithm of start-up curves optimisation of steam turbines, Archives of Energetic, No. 4, 1999, 3-11 (in Polish).
• [20] Kosman G., Rusin A,.: A New Procedures for Minimising Start-up Costs for Steam Turbines, Project KBN No. 5 To7B 04I22, Gliwice 2002-2004,
• [21] Kosman G., Rusin A., Roskosz M.: Components heating process control during turbine start-up and power change, zagadnienia Eksploatacji Maszyn, nr 2,2002 (in Polish).
• [22] Rusin A., Kosman G.: Thermal stress monitoring system with new algorithms of the stress states modelling,Int. Conf. GRE'2002, Szczyrk 2002 (in Polish).
• [23] Rusin A., Lipka M.: Heating optimization of the thick-walled shells, Prace IMiUE Pol. Śl. nr 10, Gliwice 2002 (inPolish).
• [24] Kruger K., Franke R., Vogelbacher L.: A new control system for minimising start-up costs for boilers and stress calculation for steam turbines, Power Gen Conf. Europe, 2002.
• [25] Sindlear, Toewe W.: Tensomax - a retrofit therrnal stress monitoring system for steam turbines, VGB PowerTech, 1/2000
• [26] Sindlear R, Toewe W.: Thermal load, control of steam turbines, BWK BrennstoffWarme-Kraft 51 (1999), Heft 10 (in German)