Charging Device of Capacitive Energy Storage for Micro Resistance Welding

• Autorzy: Kozhushko Y. , Karbivska T. , Zinchenko D. , Pavković D. , Rosolowski E. , Bondarenko O.
• Języki publikacji: EN

Abstrakty

EN

Micro resistance welding is the most common technology for making permanent connection between two conducting materials. This paper proposes a high-efficiency charging device for the capacitive energy storage within the micro resistance welding device power supply utilizing a Flyback converter. Based on the comprehensive analysis of charging device losses, it is determined that one of the main sources of conduction losses in the charging device is the output diode. In order to ameliorate this problem, utilization of a MOSFET transistor as an output diode within the Flyback converter is proposed in order to increase its overall efficiency. The presented results suggest that the proposed Flyback converter topology could improve the power efficiency by 7.0% at 50 kHz switching frequency through minimization of conduction losses in comparison with the traditionally-used Schottky diode.

Słowa kluczowe

EN

micro resistance welding; supercapacitor; capacitive energy storage; flyback converter

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Present Problems of Power System Control
• Rocznik: 2018
• Tom: Nr 9
• Strony: 5--17
• Opis fizyczny: Bibliogr. 16 poz., tab., rys.

Twórcy

autor

Kozhushko Y.

• National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute", Kyiv, Ukraine

autor

Karbivska T.

• National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute", Kyiv, Ukraine

autor

Zinchenko D.

• National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute", Kyiv, Ukraine
• Tallinn University of Technology, Tallinn, Estonia

autor

Pavković D.

• University of Zagreb, Zagreb, Croatia

autor

Rosolowski E.

• Wrocław University of Science and Technology, Wrocław, Poland

autor

Bondarenko O.

• National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute", Kyiv, Ukraine

Bibliografia

• [1] DONG S., KALKA G., ZHOU Y., Electrode sticking during micro-resistance welding of thin metal sheets, Electronics Packaging Manufacturing IEEE Transactions, 2002, Vol. 25, No. 4, 355–361, DOI: http://dx.doi.org/10.1109/ICEPT.2017.8046536.
• [2] BONDARENKO Yu., SAFRONOV P., BONDARENKO O., SYDORETS V., ROGOZINA T., The hybrid energy storages based on batteries and ultracapacitors for contact microwelding, Tekhnologiya i konstruirovanie v elektronnoi apparature, 2014, No. 4, 33–38 (in Russian), DOI: http://dx.doi.org/10.15222/ TKEA2014.4.33.
• [3] SHEN J., DUSMEZ S., KHALIGH A., Optimization of Sizing and Battery Cycle Life in Battery. Ultracapacitor Hybrid Energy Storage Systems for Electric Vehicle Applications, IEEE Transactions on Industrial Informatics, 2014, Vol. 10, No. 4, pp. 2112–2121, DOI: http://dx.doi.org/10.1109/ TII.2014.2334233.
• [4] SHIN D., KIM Y., SEO J., Battery-supercapacitor hybrid system for high-rate pulsed load applications, Design, Automation & Test in Europe. Grenoble, France. March 2011, 627–632, DOI: https:// doi.org/10.1109/DATE.2011.5763295.
• [5] CHOI W., YANG M., SUH Y., High-efficiency supercapacitor charger using an improved two-switch forward converter, Journal of Power Electronics, 2014, Vol. 14, No. 1, 1–10, DOI: http://dx.doi.org/ 10.6113/JPE.2014.14.1.1.
• [6] YANG M., CHO H., LEE S., CHOI W., High-efficiency ultracapacitor charger using a soft-switching full-bridge DC-DC converter, IEEE Applied Power Electronics Conference and Exposition (APEC). Charlotte, USA. March, 2015, 2044–2049, DOI: http://dx.doi.org/10.1109/APEC.2015.7104630.
• [7] HRANOV T., VACHEVA G., HINOV N., ARNAUDOV D., Modeling DC-DC converter for charging supercapacitors. 40th International Spring Seminar on Electronics Technology (ISSE). Sofia, Bulgaria. May 2017, 1–5, DOI: http://dx.doi.org/10.1109/ISSE.2017.8001002.
• [8] KRAEV G., HINOV N., ARNAUDOV D., RANGELOV N., GILEV B., Serial ZVS DC-DC converter for supercapacitor charging. 19th International Symposium on Electrical Apparatus and Technologies (SIELA), Bourgas, Bulgaria, May 2016, 193–196, DOI: http://dx.doi.org/10.1109/SIELA.2016.7543018.
• [9] YANG H., ZHANG Y., Analysis of supercapacitor energy loss for power management in environmentally powered wireless sensor nodes, IEEE Transactions on Power Electronics, 2013, Vol. 28, No. 1, 5391–5403, DOI: http://dx.doi.org/10.1109/TPEL.2013.2238683.
• [10] PAVKOVIĆ D., CIPEK M., KLJAIĆ Z., MLINARIĆ T.J., HRGETIĆ M., ZORC D., Damping Optimum-Based Design of Control Strategy Suitable for Battery, Ultracapacitor Electric Vehicles, Energies, 2018, Vol.11, No. 10, Paper No. 2854, 26 pp., DOI: https://doi.org/10.3390/en11102854.
• [11] PAVKOVIĆ D., CIPEK M., HRGETIĆ, M, SEDIĆ A., Modeling, parameterization and damping optimum-based control system design for an airborne wind energy ground station power plant, Energy Conversion and Management, 2018, Vol. 164, pp. 262–276, DOI: https://doi.org/10.1016/j.enconman.2018.02.090.
• [12] IVANOVIC Z., BLANUSA B., KNEZIC M., Power Loss Model for Efficiency Improvement of Boost Converter. XXIII International Symposium on Information, Communication and Automation Technologies. Sarajevo, Bosnia and Herzegovina, October 2011, 1–6, DOI: http://dx.doi.org/10.1109/ ICAT.2011.6102129
• [13] CAPITAINE A., PILLONNET G., CHAILLOUX T., KHALED F., ONDEL O., ALLARD B., Loss analysis of flyback in discontinuous conduction mode for sub-mW harvesting systems. 14th IEEE International New Circuits and Systems Conference (NEWCAS), Vancouver, Canada, June 2016, 1–4, DOI: http://dx.doi.org/10.1109/NEWCAS.2016.7604810.
• [14] SULLIVAN C., HARRIS H., HERBERT E., Core loss predictions for general PWM waveforms from a simplified set of measured data. Proc. of Applied Power Electronics Conference and Exposition (APEC), Palm Springs, USA, February 2010, 1048–1055. DOI: http://dx.doi.org/10.1109/ APEC.2010.5433375.
• [15] FIORILLO F., BEATRICE C., BOTTAUSCIO O., CARMI E., Eddy-Current Losses in Mn-Zn Ferrites, IEEE Transactions on Magnetics, 2014, Vol. 50, No. 1, DOI: http://dx.doi.org/10.1109/ TMAG.2013.2279878.
• [16] SEMENOV B., Power Electronics: from simple to complicated, SOLON-Press, Moscow 2005, 416 (in Russian).