PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Tire and Engine Sources Contribution to Vehicle Interior Noise and Vibration Exposure Levels

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The main objective of the research presented in this paper is to enhance driver-passengers Comfort of a vehicle that in turn leads to better vehicle safety and stability. The focus was put on studying the interior vibration and noise contributions originated from tire-road and engine-transmission subsystems, due to their significant impact on the dynamic performance of the vehicle. The noise and vibration measurements were recorded at the driver’s head position and on the driver legs room. Furthermore, the influence of different tire types and road surface textures on the vehicle interior noise and vibration were considered. The results indicate that the widely used conventional engine mounts and tires in commercial vehicles cannot fulfill the conflicting requirements for the best isolation concerning both road surface and engine-transmission induced excitations. The values of driver’s head position sound pressure level and floor vibration acceleration broadband averages originate for engine-transmission are lower than that for tire-road interaction. Furthermore, the values of RMS, crest factor, kurtosis and IRI for the vehicle waveform were estimated for vehicle speeds, tire types and road surface textures. Moreover, the percentage contribution for both interior noise and vibration originated from tire-road interaction is higher than the one from vehicle engine-transmission system in all the vehicle speed range, tire type and road surface texture considered.
Rocznik
Strony
201--214
Opis fizyczny
Bibliogr. 18 poz., fot., rys., tab., wykr.
Twórcy
  • Faculty of Engineering, El Mataria, Helwan University, Masaken El Helmia, P.O.Box 11718, Cairo, Egypt
Bibliografia
  • 1. Abouel-Seoud S. A. (2014), Assessment of passenger ride comfort during vertical vibration of mid-size saloon and off-road vehicles on asphalt roads, International Journal of Vehicle Structures and Systems, 6, 1-2, 39-46.
  • 2. Abouel-Seoud S. A. (2015), Influence of road roughness parameters on low frequency interior noise in off-road and mid-size passenger vehicles, International Journal of Vehicle Structures and Systems, 7, 2, 71-76.
  • 3. Abouel-Seoud S. A. (2016), Active control analysis of passenger vehicle interior noise produced from tyre/road interaction, International Journal of Vehicle Noise and Vibration, 12, 2, 138-161.
  • 4. Abouel-Seoud S. A., Watany M., Elsid M., Abde-Halim N. A., Mohamed E. S., Abdallah A. S. (2018), Evaluation of vibro-acoustics comfort criterion inside a vehicle manifested from interaction of tire/road, International Journal of Public Health and Health Systems, 3, 1, 1-13.
  • 5. Andersen L. G., Larsen J. K. (2015), Introducing functional data analysis to coast down modeling for rolling resistance estimation, SAE Journal of Passenger Cars-Mechanical Systems, 8, 2, 726-732.
  • 6. Gallo M., Komiya Y., Janssens K., Anthonis J., Van der Anweraer H., De Oliveira L. P. R. (2010), Active sound quality control of vehicle interior sound, Proceeding of ISMA 2010 including USD2010, pp. 559-570.
  • 7. Junoh A. K., Nopiah Z. M., Abdul A. H., Nor M. J., Ihsan A. K, Fouladi M. H. (2012a), A study to predict the effects of tires vibration to sound quality in passenger car cabin, International Journal of Engineering, 6, 1, 53-69.
  • 8. Junoh A. K, Nopiah Z. M., Muhamad W. Z. W., Nor M. J. M., Fouladi M. H. (2012b), An optimization model of noise and vibration in passenger car cabin, Advanced Materials Research, 383-390, 6704-6709.
  • 9. Kim G.-J. (2000), The identification of tyre induced vehicle interior noise, Seoul 2000 FISITA World Automotive Congress, June 12-15, Seoul, Korea.
  • 10. Li L., Singh R. (2015), Start-up transient vibration analysis of a vehicle powertrain system equipped with a nonlinear clutch damper, SAE International Journal of Passenger Cars Mechanical Systems, 8, 2, 726-732.
  • 11. Mahajan S. R, Rajopadhye R. D. (2013), Transportation noise and vibration sources, prediction, and control, International Journal of Soft Computing and Engineering, 3, 5, 2231-2307.
  • 12. Mohamed E. S., Abouel-Seoud S. A., Eltantawie M., Mohamud A., Salah M. (2018), Improved vehicle interior structure-borne noise induced by the powertrain using parallel dry friction damper, Journal of Low Frequency Noise, Vibration and Active Control, 37, 2, 295-312.
  • 13. Mohammadi N. (2015), Analytical and experimental evaluation of cabin noise sources of MB 1924 truck and its acoustic treatment, International Journal of Engineering and Technology Sciences, 3, 2, 178-194.
  • 14. Nahvi H., Fouladi M. H., Nor M. J. (2009), Evaluation of whole-body vibration and ride comfort in a passenger car, International Journal of Acoustics and Vibration, 14, 3, 143-149.
  • 15. Nor M. J. M., Fouladi M. H., Nahvi H., Ariffin A. K. (2008), Index for vehicle acoustical comfort inside a passenger car, Applied Acoustics, 69, 4, 343-353:
  • 16. Siano D., Prati M. V., Costagliola M. A., Panza M. A. (2015), Evaluation of noise level inside cab of a bi-fuel passenger vehicle, WSEAS Transactions on Applied and Theoretical Mechanics, 10, 220-226.
  • 17. Sun D., Yan B., Han B., Song Y., Zhang X. (2016), Vibration characteristic simulation of a pneumatic artificial muscle damping seat, Journal of Low Frequency Noise, Vibration and Active Control, 35, 1, 39-51.
  • 18. van der Seijs M., de Klerk D., Rixen D. J. (2016), General framework for transfer path analysis. History, theory and classification of techniques, Mechanical Systems and Signal Processing, 68-69, 217-244.
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-1a67f0e4-9f76-4adc-98e0-a6a8e5d54412
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.