Possibilities of application PVD coating nACRo4 deposited on high contact ratio gearing in interaction with the conventional and eco-friendly lubricant

• Autorzy: Fürstenzeller A. , Tóth F. , Kadnár M.

Identyfikatory

DOI

10.30464/jmee.2018.2.3.169

• Języki publikacji: EN

Abstrakty

EN

The submitted article deals with the issue of the application of the PVD coating nACRo4 deposited on the High Contact Ratio gearing made of 16MnCr5 material in interaction with the conventional PP 90H lubricant and biological Biogear S150 lubricant. Experimental tests were carried out on an FZG test rig with closed performance flow, followed by measuring of the surface roughness change. In experiment, we followed the STN 65 6280 norm for FZG scuffing tests, from which we gained load values for different load levels. The results of experimental tests were statistically processed and, on basis on them, relations were established between surface roughness and load level for both used lubricants.

Słowa kluczowe

EN

FZG test; HCR gearing; eco-friendly oil; PVD coating

PL

test FZG; uzębienie HCR; olej przyjazny dla środowiska; powłoka PVD

• Wydawca: Wydawnictwo Uczelniane Politechniki Koszalińskiej
• Czasopismo: Journal of Mechanical and Energy Engineering
• Rocznik: 2018
• Tom: Vol. 2, No 3
• Strony: 169--174
• Opis fizyczny: Bibliogr. 14 poz., rys., tab., wykr.

Twórcy

autor

Fürstenzeller A.

• Facultry of Engineering, Department of Machine Design, Slovak University of Agriculture in Nitra, Tr. A. Hlinku 2, 949 76, Nitra, Slovakia

autor

Tóth F.

• Facultry of Engineering, Department of Machine Design, Slovak University of Agriculture in Nitra, Nitra, Slovakia

autor

Kadnár M.

• Facultry of Engineering, Department of Machine Design, Slovak University of Agriculture in Nitra, Nitra, Slovakia

Bibliografia

• 1. Hoehn B.R., et.al. (2008) Test methods for gear lubricants. Goriva i maziva, Vol. 47, No. 2, pp. 129-157.
• 2. Michalczewski R., et al. (2013) New scuffing test methods for the determination of the scuffing resistance of coated gears. Tribology - Fundamentals and advancements, Vol. 12, No. 4, pp.187-215.
• 3. Vereš M., et. al. (2014) Optimalization of HCR gearing geometry using generalized particle swarm optimalization algorithm. Modern methods of construction design, Vol. 109, No. 10, pp. 539-545.
• 4. Bošanský M., Rusnák J., (2017) Assessment of options for applications TICN-MP + movic deposited on the convex-concave gearing working in interaction with the eco-friendly lubricant. In: Proceedings of 58th international conference of Machine Design Departments. ICMD 2017: Praha, 6.-8. 9. 2017. 1. vyd. Praha: Czech University of Life Sciences Prague, 2017, pp. 44-49.
• 5. Mišány J. (2015) Vplyv prevodového ústrojenstva stavebného stroja a možnosti zvýšenia jeho únosnosti so zameraním na zníženie ekologického zaťaženia pôdy - Dissertation thesis. STU v Bratislave, Bratislava.
• 6. Zápotočný J. (2014) Určenie kvalitatívnych a kvantitatívnych charakteristík deponovaných povlakov v systéme povlak bok zuba z tribotechnického hľadiska – Dissertation thesis. STU v Bratislave, Bratislava.
• 7. Bošanský M., Vereš M., Tököly P., Vanya A. (2012) Neštandardné ozubené prevody. STU v Bratislave, Bratislava.
• 8. STN 656280:1985 (1985) Mazacie prostriedky. Metóda hodnotenia protizadieracích vlastností na ozubenom skúšobnom prevode. Slovak Technical Standard.
• 9. Kadnár M., Rusnák J., Tkáč Z., Bošanský M., (2017) Tribological experiments in automobile industry. Visnik nacionaľnovo techničnovo universitetu "CHPI".
• 10. Rusnák J., (2005) Štúdium tribologických vlastností materiálov nanesených na povrch nekonvenčnými technológiami: metódy, prístroje a interpretácia.SPU v Nitre, Nitra.
• 11. Kučera M., Rusnák J., (2008) Štúdium tribologických vlastností materiálov nanesených na povrch vybranými technológiami navárania: metódy, prístroje a interpretácia = monografia. SPU v Nitre, Nitra.
• 12. Bromark M., et.al. (1992) Influence of substrate and surface topography on the critical surface force in scratch adhesion testing of TiN-coated steels. Surface Coating Technology, 52 pp. 195–203.
• 13. Hatamleh O., et. al., (2009) Surface roughness and friction coefficent in peened friction stir welded 2195 aluminum alloy. Apllied surface science.
• 14. Bošanský M., Vanya A., Vereš M., (2013) Evaluation of properties of selected coatings on steel C60E in terms of their use in gearing. Advanced Materials Research, No. 25, pp. 81-85.

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).