Investigating the Possibility of Regenearation by Hardfacing for Forging Tools Based on Analysis of Tool Working Conditions and Wear Evaluationy

• Autorzy: Widomski Paweł , Kaszuba Marcin , Krawczyk Jakub , Nowak Bartłomiej , Lange Artur , Sokołowski Paweł , Gronostajski Zbigniew

Identyfikatory

DOI

10.24425/amm.2022.141067

• Języki publikacji: EN

Abstrakty

EN

Tests were performed on example tools applied in hot die forging processes. After withdrawal from service due to excessive wear, these tools can be regenerated for re-use through machining and hardfacing. First, analysis of worn tools was carried out for the purpose of identifying tool working conditions and wear mechanisms occurring in the surface layer of tools during forging. Testing of worn tools included observations under a microscope, surface scanning and microhardness measurement in the surface layer. The results indicate very diverse work conditions, which suggest the application of different materials and hardfacing tool regeneration technology in individual die forging processes.

Słowa kluczowe

EN

forging tool; regeneration; hardfacing; wear

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2022
• Tom: Vol. 67, iss. 4
• Strony: 1395--1410
• Opis fizyczny: Bibliogr. 39 poz., fot., rys., tab.

Twórcy

autor

Widomski Paweł

• Wroclaw University of Science and Technology, Department of Metal Forming, Welding and Metrology, 7-9 Lukasiewicza Str., 50-371, Wroclaw, Poland

• https://orcid.org/0000-0001-5839-6851

autor

Kaszuba Marcin

• Wroclaw University of Science and Technology, Department of Metal Forming, Welding and Metrology, 7-9 Lukasiewicza Str., 50-371, Wroclaw, Poland

• https://orcid.org/0000-0002-7223-9550

autor

Krawczyk Jakub

• Wroclaw University of Science and Technology, Department of Metal Forming, Welding and Metrology, 7-9 Lukasiewicza Str., 50-371, Wroclaw, Poland

• https://orcid.org/0000-0002-6541-5931

autor

Nowak Bartłomiej

• CEO, Kuźnia Jawor S.A. Poland

• https://orcid.org/0000-0003-4941-8742

autor

Lange Artur

• Wroclaw University of Science and Technology, Department of Metal Forming, Welding and Metrology, 7-9 Lukasiewicza Str., 50-371, Wroclaw, Poland

• https://orcid.org/0000-0001-6328-8740

autor

Sokołowski Paweł

• Wroclaw University of Science and Technology, Department of Metal Forming, Welding and Metrology, 7-9 Lukasiewicza Str., 50-371, Wroclaw, Poland

• https://orcid.org/0000-0003-2425-2643

autor

Gronostajski Zbigniew

• Wroclaw University of Science and Technology, Department of Metal Forming, Welding and Metrology, 7-9 Lukasiewicza Str., 50-371, Wroclaw, Poland

• https://orcid.org/0000-0002-3550-1003

Bibliografia

• [1] P. Wasiunyk, Kucie matrycowe / Die forging, WNT, Warszawa, 1987.
• [2] A. Kocańda, Określenie trwałości narzędzia w obróbce plastycznej metali / Estimation of tool life in metal forming, in: M. Piela, A. Grosman, F. Kusiak, J. Pietrzyk (Ed.), Inform. w Technol. Met., Wydawnictwo Politechniki Śląskiej, Gliwice, 2003: pp. 213-256.
• [3] J.H. Kang, I.W. Park, J.S. Jae, S.S. Kang, Study on die wear model considering thermal softening (II): Application of the suggested wear model, J. Mater. Process. Technol. 94, 183-188 (1999). DOI: https://doi.org/10.1016/S0924-0136(99)00104-1
• [4] Z. Gronostajski, M. Kaszuba, S. Polak, M. Zwierzchowski, A. Niechajowicz, M. Hawryluk, The failure mechanisms of hot forging dies, Mater. Sci. Eng. A. (2016). DOI: https://doi.org/10.1016/j.msea.2016.01.030.
• [5] Z. Gronostajski, M. Kaszuba, M. Hawryluk, M. Zwierzchowski, A review of the degradation mechanisms of the hot forging tools, Arch. Civ. Mech. Eng. 14, 528-539 (2014). DOI: https://doi.org/10.1016/j.acme.2014.07.002
• [6] M. Hawryluk, M. Kaszuba, Z. Gronostajski, P. Sadowski, Systems of supervision and analysis of industrial forging processes, Eksploat. i Niezawodn. - Maint. Reliab. 18, 315-324 (2016). DOI: https://doi.org/10.17531/ein.2016.3.1
• [7] Z. Gronostajski, M. Hawryluk, M. Kaszuba, A. Niechajowicz, S. Polak, S. Walczak, D. Jabłoński, Die Profile Optimization for Forging Constant Velocity Joint Casings, Arch. Metall. Mater. 56 (2011). DOI: https://doi.org/10.2478/v10172-011-0059-z
• [8] K. Lange, L. Cser, M. Geiger, J.A.G. Kals, Tool Life and Tool Quality in Bulk Metal Forming, CIRP Ann. - Manuf. Technol. 41, 667-675 (1992). DOI: https://doi.org/10.1016/S0007-8506(07)63253-3
• [9] Z. Gronostajski, M. Hawryluk, J. Jakubik, M. Kaszuba, G. Misiun, P. Sadowski, Solution examples of selected issues related to die forging, Arch. Metall. Mater. 60, 2773-2781 (2015). DOI: https://doi.org/10.1515/amm-2015-0446
• [10] J.R. Turyk, Struktura i właściwosci warstw napawanych na wykrojach matryc kuźniczych, Politechnika Krakowska, 2019.
• [11] B. Buchmayr, Damage, Lifetime, and Repair of Forging Dies, BHM Berg- Und Hüttenmännische Monatshefte. (2017). DOI: https://doi.org/10.1007/s00501-016-0566-3
• [12] R. Miller, Weld Repair of Tools and Dies: 10 Popular Q&As, Postle Ind. Inc.; Cleveland, Ohio. 1-3 (2017). http://www.hardfacetechnologies.com/postle_hft_btsp/pdfs/forge-weld-repair-postle.pdf.
• [13] V. Lazić, D. Arsić, R. Nikolić, S. Aleksandrović, D. Milosavljević, M. Djordjević, R. Čukić, Reparation of damaged forging dies by hard facing (HF) technology, Prod. Eng. Arch. (2015). DOI: https://doi.org/10.30657/pea.2017.06.07
• [14] V. Lazić, A. Sedmak, S. Aleksandrović, D. Milosavljević, R. Čukić, V. Grabulov, Reparation of the damaged forging hammer mallet by hard facing and weld cladding, Teh. Vjesn. (2009).
• [15] D. Lee, Extend Die Life with Flood Welding, (2019). https://www.forgemag.com/articles/84887-extend-die-life-with-flood-welding (accessed April 12, 2020).
• [16] S. Pytel, J. Turek, S. Okoński, K. Zarębski, The properties and microstructure of padding welds built up on the surface of forging dies, Arch. Foundry Eng. 10, 5-10 (2010).
• [17] C.U. Balu, P.O. Daijo, K.P.S. Faizal, T.O. Rinson, J. Salim, Sigimon, T. Mathew, Welding life enhancement of steel forging dies, Int. J. Adv. Eng. Glob. Technol. 4, 1771-1779 (2016).
• [18] M. Farhani, A. Amadeh, H. Kashani, A. Saeed-Akbari, The study of wear resistance of a hot forging die, hardfaced by a cobalt-base superalloy, in: Mater. Forum, 2006.
• [19] H. Kashani, A. Amadeh, H.M. Ghasemi, Room and high temperature wear behaviors of nickel and cobalt base weld overlay coatings on hot forging dies, Wear. (2007). DOI: https://doi.org/10.1016/j.wear.2006.08.028.
• [20] M. Bayramoglu, H. Polat, N. Geren, Cost and performance evaluation of different surface treated dies for hot forging process, J. Mater. Process. Technol. (2008). DOI: https://doi.org/10.1016/j.jmatprotec.2007.11.256.
• [21] H. Kashani, A. Amadeh, M.R. Vatanara, Improvement of wear resistance of hot working tool steel by hardfacing Part 2 - Case study, Mater. Sci. Technol. 24, 356-360 (2008). DOI: https://doi.org/10.1179/174328407X166731
• [22] D.G. Ahn, H.J. Lee, J.R. Cho, D.S. Guk, Improvement of the wear resistance of hot forging dies using a locally selective deposition technology with transition layers, CIRP Ann. - Manuf. Technol. 65, 257-260 (2016). DOI: https://doi.org/10.1016/j.cirp.2016.04.013
• [23] D.I. Kim, Y.H. Jang, H.J. Lee, D.G. Ahn, H. Song, C.S. Seok, Design of overlay coated region with hardfacing, transition and damage diminution layers for the reduction of damages of hot forging tools, J. Mech. Sci. Technol. 31, 5639-5647 (2017). DOI: https://doi.org/10.1007/s12206-017-1104-2
• [24] F. Gao, J. Zhou, J. Zhou, L. Shen, J. Zhang, Y.P. Tao, M.Y. Li, Microstructure and properties of surfacing layers of dies manufactured by bimetal-gradient-layer surfacing technology before and after service, Int. J. Adv. Manuf. Technol. (2017). DOI: https://doi.org/10.1007/s00170-016-8679-0
• [25] L. Shen, J. Zhou, Y.B. Xiong, J.S. Zhang, Y. Meng, Analysis of service condition of large hot forging die and refabrication of die by bimetal-layer weld surfacing technology with a cobaltbased superalloy and a ferrous alloy, J. Manuf. Process. (2018). DOI: https://doi.org/10.1016/j.jmapro.2018.01.005
• [26] Z. Gronostajski, P. Widomski, M. Kaszuba, M. Zwierzchowski, M. Hawryluk, Influence of both hardfaced and nitrided layers on the durability of hot forging tools, Surface Innovations 6 (4-5), 301-310 (2018). DOI: https://doi.org/10.1680/jsuin.18.00021
• [27] M. Kaszuba, P. Widomski, P. Białucki, A. Lange, B. Boryczko, M. Walczak, Properties of new-generation hybrid layers combining hardfacing and nitriding dedicated to improvement in forging tools’ durability, Archives of Civil and Mechanical Engineering, 20 (3), (2020). DOI: https://doi.org/10.1007/s43452-020-00080-8
• [28] M. Kaszuba, The application of a new, innovative, hybrid technology combining hardfacing and nitriding to increase the durability of forging tools, Archives of Civil and Mechanical Engineering, 20 (4), (2020). DOI: https://doi.org/10.1007/s43452-020-00122-1
• [29] J. Luo, X. Wang, G. Zhao, J. Wang, Study on mechanical properties and microstructure of gradient functional layer prepared by CO2 surfacing welding with electromagnetic stir, Jinshu Xuebao / Acta Metall. Sin. (2009).
• [30] F. Wojtkun, J. Sołncew, Materiały specjalnego przeznaczenia, Monografie, Radom, 1999.
• [31] J. Radziejewska, Laserowa modyfikacja właściwości warstwy wierzchniej wspomagana nagniataniem, Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk, Warszawa, 2011.
• [32] J. Radziejewska, Stan warstwy wierzchniej po laserowej oraz laserowo-mechanicznej modyfikacji powierzchni, Przegląd Spaw. - Weld. Technol. Rev. (2016). DOI: https://doi.org/10.26628/ps.v88i3.572
• [33] D. Junker, O. Hentschel, M. Schmidt, M. Merklein, Investigation of Heat Treatment Strategies for Additively-Manufactured Tools of X37CrMoV5-1, Metals (Basel). 8, 854 (2018). DOI: https://doi.org/10.3390/met8100854
• [34] O. Hentschel, L. Siegel, C. Scheitler, F. Huber, D. Junker, A. Gorunow, M. Schmidt, Processing of AISI H11 tool steel powder modified with carbon black nanoparticles for the additive manufacturing of forging tools with tailored mechanical properties by means of laser metal deposition (LMD), Metals (Basel). (2018). DOI: https://doi.org/10.3390/met8090659
• [35] K. Eimann, M. Drach, Instandsetzung von Werkzeugen mit Laserstrahlung, in: Tagungsband Aachner Kolloquium Lasertechnik AKL, 2000: pp. 29-31.
• [36] D. Junker, O. Hentschelb, R. Schramme, M. Schmidt, M. Merklein, Performance of hot forging tools built by laser metal deposition of hot work tool steel X37CrMoV5-1, in: Lasers Manuf. Conf., 2017.
• [37] S. Corbin, Control of Laser Cladding Process, in: Laser Cladding, CRC Press, 2004. DOI: https://doi.org/10.1201/9781420039177.ch5.
• [38] B. Müller, R. Hund, R. Malek, N. Gerth, Laser beam melting for tooling applications - New perspectives for resource-efficient metal forming and die casting processes, in: IFIP Adv. Inf. Commun. Technol., 2013. DOI: https://doi.org/10.1007/978-3-642-41329-2_14.
• [39] B. Muller, M. Gebauer, R. Hund, R. Malek, N. Gerth, Metal Additive Manufacturing for tooling applications - Laser Beam Melting technology increases efficiency of dies and molds, in: Met. Addit. Manuf. Conf., 2014.

Uwagi

1. This study was funded by The National Centre for Research and Development in Poland (NCBR) by grant “Technology of accurate and high-performance regeneration of forging dies used in the die forging processes.” for Kuznia Jawor S.A.

2. Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).