Shape Errors, Internal Porosity, Linear Dimensions Accuracy and Allowances for the Machining of Castings Made in the Replicast CS Process

• Autorzy: Haratym R. , Sieczka M. , Biernacki R. , Kwapisz J.
• Języki publikacji: EN

Abstrakty

EN

This research presents comprehensive assessment of the precision castings quality made in the Replicast CS process. The evaluation was made based on quality of the surface layer, shape errors and the accuracy of the linear dimensions. Studies were carried out on the modern equipment, among other things a Zeiss Calypso measuring machine and profilometer were used. Obtained results allowed comparing lost wax process models and Replicast CS process.

Słowa kluczowe

EN

Replicast CS process; shape errors; dimensional accuracy

PL

proces Replicast CS; błędy kształtu; dokładność wymiarowa

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2014
• Tom: Vol. 14, iss. 3
• Strony: 25--28
• Opis fizyczny: Bibliogr. 6 poz., rys.

Twórcy

autor

Haratym R.

• University of Ecology and Management, Olszewska 12, 00-792 Warsaw

autor

Sieczka M.

• University of Ecology and Management, Olszewska 12, 00-792 Warsaw

autor

Biernacki R.

• Warsaw University of Technology, Faculty of Production Engineering, ul. Narbutta 85, 02-524 Warsaw

autor

Kwapisz J.

• Instituto Superior Tecnico, MIT Portugal, Av. Rovisco Pais, 1, 1049-001 Lisboa, Portugal

Bibliografia

• [1] Haratym, R., Biernacki, R., Myszka, D. (2008). Ecological investment casting in ceramic moulds Publishing House.
• [2] Perzyk, M., Waszkiewicz, S., Kaczorowski A. (2004). Odlewnictwo. Warsaw: WNT.
• [3] Collective work. (2013). Fuel and Energy Economy in the years 2011, 2012. Warsaw: Central Statistical Office – GUS.
• [4] Collective work. (2013). Protection of the environment in 2013. Warsaw: Central Statistical Office – GUS.
• [5] Lewandowski, W.M. (2002). Environmental friendly renewable energy sources. Warsaw: WNT.
• [6] Tomasik, J. & Haratym, R. (2002). Bearing capacity of precision casting surface in aspect of ecological requirements. Acta Metallurgica Slovaca. 8, 367-372.