Evaluation of the properties of modified local asphalt binder by using styrene butadiene rubber (SBR) or low-density polyethylene (LDPE)

• Autorzy: Mustafa Safa , Hameed Mohammed Aziz , Dulaimi Anmar

Identyfikatory

DOI

10.22630/srees.3375

• Języki publikacji: EN

Abstrakty

EN

The influence of styrene butadiene rubber (SBR) or low-density polyethylene (LDPE) polymers on the characteristics of local asphalt binder was analyzed to characterize the rheological properties. The results indicated that the SBR or LDPE increased the softening point. The softening point was enhanced by around 35% when 9% of SBR was used in comparison to the unmodified asphalt, while there was a 15% increment when LDPE was used. The results also indicated that the SBR or LDPE decreased the penetration rate. The penetration decreases by around 36% when 9% of SBR is used compared to the neat asphalt, while a significant increment was 89% when 9% of LDPE is used. Additionally, when 9% SBR was employed, the ductility of the asphalt binder rose by roughly 73%, but 64% less ductility was seen when 9% LDPE was utilized. Finally, the addition of the additive has improved the penetration index, thus reducing the temperature sensitivity. Due to said above, SBR and LDPE are practical and promising modifiers that will be useful in enhancing the performance of the asphalt binder straightforwardly and efficiently.

Słowa kluczowe

EN

asphalt binder; polymers; SBR; LDPE; rheological properties

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Przegląd Naukowy Inżynieria i Kształtowanie Środowiska
• Rocznik: 2022
• Tom: Vol. 31, No. 3
• Strony: 190--202
• Opis fizyczny: Bibliogr. 48 poz., tab., wykr., zdj.

Twórcy

autor

Mustafa Safa

• Ministry of Education, Karbala, Iraq

autor

Hameed Mohammed Aziz

• Ministry of Education, Karbala, Iraq

autor

Dulaimi Anmar

• Ministry of Education, Karbala, Iraq
• University of Warith Al-Anbiyaa, College of Engineering, Karbala, Iraq
• Liverpool John Moores University, School of Civil Engineering and Built Environment, Liverpool, UK

Bibliografia

• Abbas, A. S. (2017). Temperature zoning of Iraq for asphalt mix design. Journal of Engineering and Sustainable Development, 21 (5), 54–63.
• Abduljabbar, N., Al-Busaltan, S., Dulaimi, A., Al-Yasari, R., Sadique, M. & Nageim, H. A. (2022). The effect of waste low-density polyethylene on the mechanical properties of thin asphalt overlay. Construction and Building Materials, 315, 125722.
• Abed, A., Hamdou, H. & Ahmed, N. (2011). Rheological properties of Iraqi asphalt binders measured using superpave system and shell software. Journal of Engineering, 17 (4), 783–799.
• Ahmed, N. Y. & Al-Harbi, A. S. M. (2014). Effect of density of the polyethylene polymer on the asphalt mixtures. Journal of University of Babylon, 22 (4), 674–683.
• Al-Bana’a, J. (2010). Effect of polymer type on the performance of modified asphalt paving mixture (doctoral dissertaton, MSc thesis). Babylon: University of Babylon, College of Engineering.
• Alghrafy, Y. M., El-Badawy, S. M. & Abd Alla, E. S. M. (2021). Rheological and environmental evaluation of sulfur extended asphalt binders modified by high- and low-density polyethylene recycled waste. Construction and Building Materials, 307, 125008.
• Al-Hadidy, A. & Yi-Qiu, T. (2009). Mechanistic approach for polypropylene-modified flexible pavements. Materials & Design, 30 (4), 1133–1140.
• American Association of State Highway and Transportation Officials [AASHTO] (2013a). Standard method of test for ductility of asphalt materials (T 51-09). Washington: The American Association of State Highway and Transportation Officials.
• American Association of State Highway and Transportation Officials [AASHTO] (2013b). Standard method of test for softening point of bitumen (Ring-and-Ball Apparatus) (T 53-09). Washington: American Association of State Highway and Transportation Officials.
• American Association of State Highway and Transportation Officials [AASHTO] (2015). Standard method of test for penetration of bituminous materials (T 49-15). Washington: American Association of State Highway and Transportation Officials.
• Ameri, M., Vamegh, M., Rooholamini, H. & Haddadi, F. (2018). Investigating effects of nano/SBR polymer on rutting performance of binder and asphalt mixture. Advances in Materials Science and Engineering, 2018, 5891963.
• Babagoli, R. (2021). Laboratory investigation of the performance of binders and asphalt mixtures modified by carbon nano tube, poly phosphoric acid, and styrene butadiene rubber. Construction and Building Materials, 275, 122178.
• Cao, X., Wang, H., Cao, X., Sun, W., Zhu, H. & Tang, B. (2018). Investigation of rheological and chemical properties asphalt binder rejuvenated with waste vegetable oil. Construction and Building Materials, 180, 455–463.
• Central Organization for Standardization and Quality Control [COSQC] (1988). Bitumen used for flatness (IQS 1196). Baghdad: Central Organization for Standardization and Quality Control.
• Chakraborty, S., Kar, S., Dasgupta, S., Mukhopadhyay, R., Bandyopadhyay, S., Joshi, M. & Ameta, S. C. (2010). Study of the properties of in-situ sodium activated and organomodified bentonite clay–SBR rubber nanocomposites – Part I: Characterization and rheometric properties. Polymer Testing, 29 (2), 181–187.
• Che, T., Pan, B., Li, Y., Ge, D., Jin, D. & You, Z. (2022). The effect of styrene-butadiene rubber modification on the properties of asphalt binders: aging and restoring. Construction and Building Materials, 316, 126034.
• Chopra, T., Parida, M., Kwatra, N. & Chopra, P. (2018). Development of pavement distress deterioration prediction models for urban road network using genetic programming. Advances in Civil Engineering, 2018, 1253108.
• Company for Tire Industry (2021). Physical properties and specification of SBR.
• Fang, C., Li, T., Zhang, Z. & Wang, X. (2008). Combined modification of asphalt by waste PE and rubber. Polymer Composites, 29 10), 1183–1187.
• Hameed, A., Al-Busaltan, S., Dulaimi, A., Kadhim, M. A. & Al-Yasari, R. (2021). Evaluating modified asphalt binder comprising waste paper fiber and recycled low-density polyethylene. Journal of Physics: Conference Series, 1973 (1), 012237.
• Hardin, J. C. (1995). Physical properties of asphalt cement binders. West Conshohocken: ASTM International.
• Hobson, G. D. & Pohl, W. (1973). Modern petroleum technology. New York: John Wiley & Sons.
• Johnston, J. B. & King, G. (2008). Using polymer modified asphalt emulsions in surface treatments. A federal lands highway interim report. Washington: Federal Highway Administration.
• Kim, H. H., Mazumder, M., Lee, S. J. & Lee, M. S. (2018). Characterization of recycled crumb rubber modified binders containing wax warm additives. Journal of Traffic and Transportation Engineering (English Edition), 5 (3), 197–206.
• Liang, M., Xin, X., Fan, W., Zhang, J., Jiang, H. & Yao, Z. (2021). Comparison of rheological properties and compatibility of asphalt modified with various polyethylene. International Journal of Pavement Engineering, 22 (1), 11–20.
• McNally, T. (2011). Polymer modified bitumen: properties and characterisation. Philadelphia: Woodhead Publishing.
• Mazumder, M., Siddique, A., Ahmed, R., Lee, S. J. & Lee, M. S. (2020). Rheological and morphological characterization of Styrene-Isoprene-Styrene (SIS) modified asphalt binder. Advances in Civil Engineering, 2020, 8877371.
• Ministry of Oil, Midland refineries company, Al-Daurah refinery (2021). Physical properties of asphalt binder. Baghdad.
• Mostafa, A. E. A., Tawhed, W. M. F. & Elshahat, M. R. (2016). Performance assessment of asphalt pavement mix modified by nano-silica and nano-clay. International Journal of Advanced Engineering and Nano Technology, 3 (3), 7–11.
• Najaf, E., Abbasi, H. & Zahrai, S. M. (2022). Effect of waste glass powder, microsilica and polypropylene fibers on ductility, flexural and impact strengths of lightweight concrete. International Journal of Structural Integrity, 13 (3), 511–533.
• Najaf, E., Orouji, M. & Zahrai, S. M. (2022). Improving nonlinear behavior and tensile and compressive strengths of sustainable lightweight concrete using waste glass powder, nanosilica, and recycled polypropylene fiber. Nonlinear Engineering, 11 (1), 58–70.
• Navarro, F. J., Partal, P., Martinez-Boza, F. J. & Gallegos, C. (2010). Novel recycled polyethylene/ground tire rubber/bitumen blends for use in roofing applications: Thermo-mechanical properties. Polymer Testing, 29 (5), 588–595.
• Nizamuddin, S., Jamal, M., Gravina, R. & Giustozzi, F. (2020). Recycled plastic as bitumen modifier: The role of recycled linear low-density polyethylene in the modification of physical, chemical and rheological properties of bitumen. Journal of Cleaner Production, 266, 121988.
• Orouji, M., Zahrai, S. M. & Najaf, E. (2021). Effect of glass powder & polypropylene fibers on compressive and flexural strengths, toughness and ductility of concrete: an environmental approach. Structures, 33, 4616–4628.
• Pfeiffer, J. P. & Van Doormaal, P. (1936). The rheological properties of asphaltic bitumens. Journal of the Institute of Petroleum Technologists, 22, 414–440.
• Polacco, G., Filippi, S., Merusi, F. & Stastna, G. (2015). A review of the fundamentals of polymer-modified asphalts: asphalt/polymer interactions and principles of compatibility. Advances in Colloid and Interface Science, 224, 72–112.
• Polacco, G., Stastna, J., Biondi, D. & Zanzotto, L. (2006). Relation between polymer architecture and nonlinear viscoelastic behavior of modified asphalts. Current Opinion in Colloid & Interface Science, 11 (4), 230–245.
• Presti, D. L. (2013). Recycled tyre rubber modified bitumens for road asphalt mixtures: a literature review. Construction and Building Materials, 49, 863–881.
• Ren, S., Liang, M., Fan, W., Zhang, Y., Qian, C., He, Y. & Shi, J. (2018). Investigating the effects of SBR on the properties of gilsonite modified asphalt. Construction and Building Materials, 190, 1103–1116.
• Roque, R., Birgisson, B., Tia, M., Kim, B. & Cui, Z. (2004). Guidelines for use of modifiers in superpave mixtures: executive summary and volume 1 of 3 volumes: evaluation of SBS modifier. Retrieved from: https://trid.trb.org/view/697983 [accessed 03.08.2022].
• Sadhu, S. & Bhowmick, A. K. (2004). Preparation and properties of styrene–butadiene rubber based nanocomposites: the influence of the structural and processing parameters. Journal of Applied Polymer Science, 92 (2), 698–709.
• Singh, B., Tarannum, H. & Gupta, M. (2003). Use of isocyanate production waste in the preparation of improved waterproofing bitumen. Journal of Applied Polymer Science, 90 (5), 1365–1377.
• Speight, J. G. (2016). Asphalt Materials Science and Technology. Boston: Butterworth-Heinemann.
• State Commission of Roads and Bridges (2003). General specification for roads and bridge. Hot-mix asphaltic concrete pavement (SORB/R9). Baghdad: Ministry of Housing and Construction, Department of Planning and Studies.
• State Company for Petrochemical Industry in Basrah City (2008). Physical Properties and Specifications for HDPE and LDPE polymers. Basrah: State Company for Petrochemical Industry in Basrah City.
• Whiteoak, D., Read, J. & Hunter, R. N. (2003). The Shell bitumen handbook (5th ed.). London: ICE Publishing.
• Zhang, F. & Yu, J. (2010). The research for high-performance SBR compound modified asphalt. Construction and Building Materials, 24 (3), 410–418.
• Zhu, J., Birgisson, B. & Kringos, N. (2014). Polymer modification of bitumen: advances and challenges. European Polymer Journal, 54, 18–38.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023)