Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Today’s automotive designers and material specialists regard lighter vehicles for less fuel consumption (economy and ecology) and higher safety to passengers. Metal matrix composites have been a large area of interest. Aluminium composite is potentially applied in automotive and aerospace industries, because it has a superior strength to weight ratio and is a light weight metal with high temperature resistance. Composites containing hard oxides and ceramics (such as alumina) are preferred for high wear resistance along with increased hardness. In thiswork, alumina and zinc are reinforced in Al-LM25 alloy through stir casting process, where alumina is varied 6% and 12% in Al-5%Zn. Various mechanical analyses were conducted and the effect of wear with different percentage of alumina reinforcement was studied. The resulting properties are imported in a piston, modelled using solidworks, and analysed in ANSYS work bench. Imparting this new material for pistons could introduce deep design and improvements in engine operation of a vehicle.
Czasopismo
Rocznik
Tom
Strony
212--217
Opis fizyczny
Bibliogr. 17 poz., il. kolor., fot., wykr.
Twórcy
autor
- Nadar Saraswathi College of Engineering and Technology, Theni, Tamilnadu, India
autor
- Assistant Professor, K. Ramakrishnan College of Engineering, Tiruchirapalli, Tamilnadu, India
Bibliografia
- [1] Pawar, P.B., Abhay, A. Utpat: Development of Aluminium Based Silicon Carbide Particulate MetalMatrix Composite for Spur Gear, ELSEVIER, ICMPC, 2014.
- [2] Ahemad, J., Bhaskar, S.V., Kapgate, R.A.: Development Of Al/Sic5%, Al/Sic10%, Al/Sic15%, Metal Matrix Composite And Its Comparison With Aluminium Alloy - Lm25 On Tribological Parameters, IJETAE, 3(9), 2013.
- [3] Singla, M., Lakhvir, S., Vikas, C.: Study of Wear Properties of Al-Sic Composites, JMMCE, 8(10), 813-819, 2009.
- [4] Singla, D., Mediratta, S.R.: Effect of Load And Speed on Wear Properties Of Al 7075-Fly Ash Composite Material, IJIRSET, 2(5), 2013.
- [5] Gadade, P., Arun, L.R.: Characterisation of Aluminium-Flyash- Alumina Composite For Piston Analysis, IJIRSET, 2(12), 2013.
- [6] Hashim, J. et al.: Metal matrix composites: production by the stir casting method, Journal of Materials Processing Technology, 92-93(1), 1999.
- [7] Prasad, S.V.: Aluminummetal-matrix composites for automotive applications: tribological considerations, Tribology Letters, 17(3), 2004.
- [8] Singla, M.: Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite, JMMCE, 8(6), 455-467, 2009.
- [9] Andersson, P.: Piston Ring Tribology A Literature Survey Vtt Industrial Systems Jaana Tamminen & Carl-Erik Sandström Helsinki University Of Technology, Internal Combustion Engine Laboratory.
- [10] Silva, F.S.: Fatigue On Engine Pistons - A Compendium Of Case Studies Department Of Mechanical Engineering, University Of Minho, Azure´M, 4800-058 Guimara~ Es, Portugal 2005.
- [11] Prashant, S.N., Madeva, N. and Auradi, V.: Preparation And Evaluation Of Mechanical And Wear Properties Of 6061al Reinforced With Graphite Particulate Metal Matrix Composite, 2009.
- [12] Mahendra Boopathi, M., Arulshri, K.P. and Iyandurai, N.: Evaluation Of Mechanical Properties Of Aluminium Alloy 2024 Reinforced With Silicon Carbide And Fly Ash Hybrid Metal Matrix Composites, 2012.
- [13] Sieminska, B. and Jankowski, A.: Composite Alloy With Very Low Dimensional Hysteresis During Heating And Cooling For Combustion Engine Piston Institute Of Aeronautics, Warszawa, Poland.
- [14] Varuzan Kevorkija Zrvk. Maribor, Slovenija Development Of Aluminum MMC Composites For Automotive Industry, Yugoslav Association For Mechanical Engineers Yame. Udc669.715/419.7:629.11.
- [15] Carvalheira, P. and Gonçalves, P.: FEA Of Two Engine Pistons Made Of Aluminium Cast Alloy A390 And Ductile Iron 65-45-12 Under Service Conditions, Ref: A0319.0006, 24-26 July 2006.
- [16] Zhang, H., Ma, X., Ge, S.: Modeling And Transient Dynamics Analysis To a new Type Of Engine Piston, 2013.
- [17] Radha Krishnan, B.Arun Prasath, K.: Mechanical Properties of Woven Fabric Basalt/Jute Fibre Reinforced Polymer Hybrid Composites, IJMERR, 2013.
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-dfdd9339-78b4-44d8-ae43-bfd69f95af5e