PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Określanie wymaganego poziomu nienaruszalności bezpieczeństwa

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Determining required safety integrity level
Języki publikacji
PL
Abstrakty
EN
One of the most important stage of technical system functional safety analysis is defining the safety-related functions as well as determining a safety integrity level (SIL) for each defined function. A properly carried out hazard identification process is the necessary condition for correct definition of the safety-related functions. Determining the safety integrity level (SIL) is based on risk assessment taking into account risk acceptance criteria. It guarantees accurate results which means that the risk associated with technical system is under good control and the risk level can be reduced to acceptable one. There are several safety integrity level determination methods and techniques described in normative documents and many papers. This article is aimed at presentation of some of them and in addition a new approache are outlined.
Rocznik
Strony
35--44
Opis fizyczny
Bibliogr. 22 poz., rys., tab.
Twórcy
autor
  • Politechnika Gdańska, Gdańsk, Polska
Bibliografia
  • [1] Barnert, T., Kosmowski, K.T. & Śliwiński, M. (2008). Determining and verifying safety integrity level under uncertainty. ESREL, Valencia, Hiszpania.
  • [2] Barnert, T., Kosmowski, K.T. & Śliwiński, M. (2009). A knowledge-based approach for functional safety management. ESREL, Praga, Czechy.
  • [3] Barnert, T., Kosmowski, K.T. & Śliwiński, M. (2010). Integrated functional safety and security analysis of process control and protection systems with regard to uncertainty issue. PSAM, Seattle, USA.
  • [4] Barnert, T., Kosmowski, K.T. & Śliwiński, M. (2010). A method for including the security aspects in the functional safety analysis of distributed control and protection systems. ESREL, Rhodos, Grecja.
  • [5] Baybutt, P. (2007). An improved risk graph approach for determination of safety integrity level (SILs). Process Safety Progress, Vol. 26.
  • [6] Blackmore, L. (2000). IEC 61508 – Practical experience in increasing the effectiveness of SIL assessments. ISA.
  • [7] CCPS (1999). Guidelines for Consequence Analysis of Chemical Releases. Center for Chemical Process Safety of the American Institute of Chemical Engineers, New York.
  • [8] CCPS (2000). Guidelines for Chemical Process Quantitative Risk Analysis. Center for Chemical Process Safety of the American Institute of Chemical Engineers, New York.
  • [9] Cruz-Campa, H.J. & Cruz-Gomes, M.J. (2009). Determine SIS and SIL using HAZOPs. Wiley InterScience, AIChE.
  • [10] Gunn, A.M. (2008). Encyclopedia of disasters. Environmental Catastrophes and Human Tragedies. Greenwood Press, Westport.
  • [11] Gulland, W.G. (2004). Methods of determining safety integrity level (SIL). Requirements – Pros and Cons. Springer-Verlag, Proc. of the SafetyCritical Systems Symposium.
  • [12] Kirkwood, D. (2005). Developments in SIL determination. IEE Computing & Control Engineering, June/July 2005.
  • [13] Kletz, T. (1999). What went wrong? Case Histories of Process Plant Disasters. Gulf Professional Publishing, Huston.
  • [14] Kosmowski, K.T. (2003). Metodyka analizy ryzyka w zarządzaniu niezawodnością i bezpieczeństwem elektrowni jądrowych. Monografie 33, Politechnika Gdańska, Gdańsk.
  • [15] Kosmowski, K.T. (2006). Functional safety in the context of risk appraisal criteria and costbenefit analysis. Functional Safety Management in Critical Systems, Gdańsk.
  • [16] Missala, T. (2009). Analiza wymagań i metod postępowania przy ocenie ryzyka i określaniu wymaganego poziomu nienaruszalności bezpieczeństwa zawartych w normach bezpieczeństwa funkcjonalnego, normach związanych z nimi oraz literaturze. PIAP, W-wa.
  • [17] Nait-Said, R., Zidani, F. & Ouzraoui, N. (2008). Fuzzy Risk Graph Model for Determining Safety Integrity Level. International Journal of Quality, Statistics, and Reliability.
  • [18] Ormos, L. & Ajtonyi, I. (2004). Soft computing method for determining the safety of technological system by 1EC 6150. Proc. of the 1st Romanian-Hungarian Joint Sympsiom on Applied Computational Inelligence (SACI '04), Timisoara, Rumunia.
  • [19] PN-EN 61508 (2004). Bezpieczeństwo funkcjonalne elektrycznych/ elektronicznych/ programowalnych elektronicznych systemów wiąŜących się z bezpieczeństwem. Części 1-7. PKN, Warszawa.
  • [20] PN-EN 61511 (2007). Bezpieczeństwo funkcjonalne. Przyrządowe systemy bezpieczeństwa do sektora przemysłu procesowego. Części 1-3, PKN, Warszawa.
  • [21] Simon, C., Sallak, M. & Aubry, J. (2007). SIL allocation of SIS by aggregation of experts' opinions. Proc. of the Safety and Reliability Conference ESREL '07, Stavanger.
  • [22] Summers, A. (1998). Techniques for assessing a target safety integrity level. ISA Transactions 37. Elsevier.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-da9d2064-9035-4fa6-8a04-2dbc94ea62d2
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.