Reconstruction fluid with new PT-86 polymer

• Autorzy: Wysocki S. , Stryczek S. , Gonet A. , Gubała P. , Gaczoł M.

Identyfikatory

DOI

10.7494/drill.2016.33.1.159

• Języki publikacji: EN

Abstrakty

EN

While reconstructing partially exploited boreholes located in south-eastern part of Poland there were several issues. Standard procedures were not efficient enough to fulfil the requirements for fluid to work properly. This enforced investor to turn to the Faculty of Drilling, Oil and Gas AGH UST Krakow for assistance in developing special formula for working fluid. Major requirements set for reconstruction fluid were to: inhibit hydration of loam rocks, reduce corrosion of casing and tubing and decrease filtrate loss which maintained at a high level. Therefore, the Faculty of Drilling, Oil and Gas AGH UST Krakow developed and compared various reconstruction fluids' formulas to eliminate encountered complications. The article also concentrates on studying the samples collected from the borehole and presents conclusions based on laboratory tests. Analyses of the research results expose best working solution for eliminating the issues that came across during reconstruction of the borehole.

Słowa kluczowe

EN

reconstruction fluids; polymers

• Wydawca: AGH University of Science and Technology Press
• Czasopismo: AGH Drilling, Oil, Gas
• Rocznik: 2016
• Tom: Vol. 33, no. 1
• Strony: 159--166
• Opis fizyczny: Bibliogr. 5 poz., tab., wykr.

Twórcy

autor

Wysocki S.

• AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Krakow, Poland

autor

Stryczek S.

• AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Krakow, Poland

autor

Gonet A.

• AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Krakow, Poland

autor

Gubała P.

• AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Krakow, Poland – student

autor

Gaczoł M.

• AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Krakow, Poland – student

Bibliografia

• [1] Uliasz M.: Metody eliminacji zanieczyszczeń solanek złożowych stosowanych jako ciecze robocze przy rekonstrukcji odwiertów. Nafta-Gaz, 10, 2008.
• [2] Herman Z., Uliasz M.: Ciecze robocze w rekonstrukcjach odwiertów. Nafta-Gaz, 11, 2006.
• [3] Herman Z., Budak P.: Ciecze do opróbowania i rekonstrukcji odwiertów. Nafta-Gaz, 3, 2000.
• [4] API SPEC. 13-1B – Standard Practice for Field Testing Water-Based Drilling Muds.
• [5] Polska Norma Branżowa BN-90/1785-01.

Uwagi

Paper prepared within the statutory research program of the Faculty of Drilling, Oil and Gas, AGH University of Science and Technology 11.11.190.555

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.