Vibration acceptance test of vehicle gearboxes used in agriculture

• Autorzy: Domotor F. , Banlaki P.
• Języki publikacji: EN

Abstrakty

EN

In this paper, a new method for vibration acceptance test of gearboxes of an agricultural vehicle is described. The method is based on the well known, and most widely used, international standards. Due to economic and other reasons, the parameters of the elaborated method do not correspond in detail to all conditions of the standards. However, both the manufacturer and the customer agreed to accept this method, as the standards themselves permit some deviations, if both parties agree to it. Tests were carried out in the acceptance workshop of the manufacturer. For the measurement the vibration analyser of a world leader was used. For the evaluation the so called waterfall spectra were used.

Słowa kluczowe

EN

vibration test; gearbox; rolling bearing analysis; agricultural vehicles

PL

wibracja próbna; skrzynia biegów; łożyska toczne; pojazdy rolnicze

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2010
• Tom: Vol. 15, no 2
• Strony: 491--496
• Opis fizyczny: Bibliogr. 11 poz., rys., wykr.

Twórcy

autor

Domotor F.

autor

Banlaki P.

• Budapest University of Technology and Economics Department of Vehicle Manufacturing and Repair H-1111 Budapest, Bertalan L. Street 2, HUNGARY,

Bibliografia

• Acceptance code for gears – Part 2, Determination of mechanical vibrations of gear units during acceptance testing, ISO 8579-2 International Standard.
• Ballas Th.A.: Periodic Noise in Bearings. – Manuscript, The Timken Roller Bearing Co., U.S.A.
• Bearing failures and their causes, SKF Repro 19208.
• Berry J.E. (1997): Tracking of Rolling Element Bearing Failure Stages, using Vibration and High Frequency Enveloping, and Demodulated Spectral Techniques (In: Predictive Maintenance and Vibration Signature Analysis II, Technical Associates of Charlotte, 347 N. Caswell Rd. Charlotte, NC 28204, U.S.A.
• Dyer D. and Stewart R.M. (1996): Detection of Rolling Element Bearing Damage by Statistical Vibration Analysis. – Manuscript, The University of Southampton, UK.
• Geropp B. (1999): Hüllkurvenanalyse – Verfahren zur Schadensfrüherkennung, Parts 1-2. – FAG Industrial Services, Antriebstechnik, vol.38, No.1., pp.51-54, No.3., pp.87-89.
• Johansson L. (1993): A general theory for vibration frequencies in bearing applications SKF Sverige AB. – Metrology Centre, Manuscript.
• Mechanical Vibration – Evaluation of machine vibration by measurements on non-rotating parts, ISO-10816 International Standard.
• Mörnbäck P.A. (): SKF techniques to explain and quantify bearing vibrations. – Quality Technology Centre, SKF Austria.
• Roller Bearing Vibration and Noise (Methods of Measuring), ANSI/ABMA 13-1987.
• Wardle F.P. (1988): Vibration forces, produced b waviness of the surfaces of thrust loaded ball bearings. – RHP Bearing Research Centre, Newark, Nottinghamshire, UK, Proceeding of the Institutions of Mechanical Engineers, vol.202, No.C3.