Delamination of an elastic circular membrane under hydrostatic pressure

• Autorzy: Orloff D. , Bloom F.
• Języki publikacji: EN

Abstrakty

EN

A mathematical model is constructed with the goal of providing criteria to determine the critical internal pressure at which an elastic membrane bonded to a plate (the substrate) separates from the plate; this critical pressure corresponds physically to the internal pressure at which the glue bond which holds the edge of an initially circular membrane (fixed along the boundary of a hole in the plate, of radius a) will begin to fracture. Unlike much of the previous work in this area, no assumption is made that the inflated membrane (blister) takes the shape of a spherical cap and the analytical criterion for delamination appears to be new.

Słowa kluczowe

EN

delamination; membrane; fracture

PL

rozwarstwienie; membrana

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2009
• Tom: Vol. 14, no. 4
• Strony: 1053--1071
• Opis fizyczny: Bibliogr. 14 poz., tab., wykr.

Twórcy

autor

Orloff D.

autor

Bloom F.

• Institute of Paper Science and Technology of the Georgia Institute of Technology 500 10th St., N.W. Atlanta, GA 30332-0620, US,

Bibliografia

• Arjun A. and Wan K.T. (2005): Derivation of the strain energy release rate G from first principles for the pressurized Blister test. - International Journal of Adhesion and Adhesives, vol.25, pp.13-18.
• Bennett S.J., DeVries K.J. and Williams M.L. (1974): Adhesive fracture mechanics. - Int. J. of Fracture, vol.10, pp.33-43.
• Briscoe B.J. and Panesar S.S. (1991): The application of the Blister test to an elastometric adhesive. - Proc. R. Soc. Lond. A, vol.444, pp.23-43.
• Dannenberg H. (1961): Measurement of adhesion by a blister method. - Journal of Applied Polymer Science, vol.5, No.1, pp.125-134.
• Gent A.N. and Kaang S. (1989): Pull-off forces for adhesive tapes. - J. Appl. Polymer Sci., vol.32, pp.4689-4700.
• Gent A.N. and Lewandowski L.H. (1987): Blow-off pressures for adhering layers. - Journal of Applied Polymer Science, vol.33, pp.1567-1577.
• Hinkley J.A. (1983): A Blister test for adhesion of polymer films to SiO2. - J. Adhesion, vol.16, pp.115-126.
• Mossakovskii V.I. and Rybka M..T. (1964): Generalization of the Griffith-Sneddon criterion for the case of a non-homogeneous body. - PMM, vol.28, No.6, pp.1061-1069.
• Plaut R.H., White S.A. and Dillard D.A. (2003): Effect of work of adhesion on contact of a pressurized Blister with a flat surface. - Int. J. of Adhesion and Adhesives, vol.23, pp.207-214.
• Wan K.T. (1999): Fracture mechanics of a shaft-loaded Blister test-transition from a bending plate to a stretching membrane. - Journal of Adhesion, vol.71, No.2-3, pp.337-337.
• Wan K.-T., Guo S. and Dillard D.A. (2003): A theoretical and numerical study of a thin clamped circular film under an external load in the presence of a tensile residual stress. - Thin Solid Films, vol.425, pp.150-162.
• Williams M.L. (1969): The continuum interpretation for fracture and adhesion. - Journal of Applied Polymer Science, vol.13, pp.29-40.
• Williams J.G. (1997): Energy release rates for peeling of flexible membranes and the analysis of blister tests. - Int. Journal of Fracture, vol.87, pp.265-288.
• Zheng M., Su Y.J., Chen L.Q. and Zhang T.Y. (1999): Frictional effects of interface bonding energy in Blister testing. - Theor. and Appl. Fracture Mech., vol.32, pp.75-80.