Effect of rotation on ferrofluid based squeeze film of various shapes between two annular plates

• Autorzy: Shah R. C.
• Języki publikacji: EN

Abstrakty

EN

This paper studied the ferrofluid squeeze film, formed when the upper annular rotating plate of various shapes (viz. secant, exponential and flat) approaches the lower flat annular one normally. Expressions for pressure, load capacity and response time are obtained for a constant transverse magnetic field in each case. The results show that load capacity and response time are found to increase when the volume fraction of the particles and rotation of the upper plate increased for alI shapes of the upper plate. In the case of curvature of the upper plate, load capacity and response time are found to increase with the increase of curvature of the exponential upper plate but decreased for the secant shaped plate.

Słowa kluczowe

EN

ferrofluid; lubrication; curved annular plates; rotation of plates

PL

smarowanie; obróbka plastyczna

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2007
• Tom: Vol. 12, no 2
• Strony: 515--525
• Opis fizyczny: Bibliogr. 13 poz., rys., wykr.

Twórcy

autor

Shah R. C.

• Department of Mathematics, Govt. Engineering College Sector - 26, Gandhinagar - 382 044 Gujarat State, INDIA,

Bibliografia

• Ajwalia M.B. (1984): Behaviour of squeeze films between two curved plates. - PhD. Thesis, S.P. University.
• Khonsari M.M. and Booser E.R. (2001): Applied Tribology: Bearing design and Lubrication. - New York: John Wiley and Sons, Inc., pp.258-297.
• Majumdar B.C. (1999): Introduction to tribology of bearings. - New Delhi: Wheeler Publishing, pp.85-101.
• Patel R.M. and Deheri G.M. (2002): Magnetic fluid based squeeze film between two curved plates lying along the surfaces determined by secant function. - Indian J. Eng. Mater. Sci., vol.9, pp.45-48.
• Ram Paras and Verma P.D.S. (1999): Ferrofluid lubrication in porous inclined slider bearing. - Indian J. Pure Appl. Math., vol.30, pp.1273-1281.
• Shah R.C. and Bhat M.V. (2000): Squeeze film between two curved annular plates lubricated with a magnetic fluid. - J. Balkan Tribological Association, vol.6, No.4, pp.184-188.
• Shah R.C. and Bhat M.V. (2003): Effect of anisotropic permeability on the ferrofluid-based squeeze film in curved porous rotating circular plates considering slip velocity. - European J. Mech. and Env. Eng. M, vol.48, No.4, pp.261-267.
• Shah R.C. and Bhat M.V. (2004): Anisotropic permeable porous facing and slip velocity on squeeze film in an axially undefined journal bearing with ferrofluid lubricant. - J. Magn. Magn. Mater., vol.279, pp.224-230.
• Shah R.C. and Bhat M.V. (2005): Ferrofluid squeeze film between curved annular plates including rotation of magnetic particles. - J. Eng. Math., vol.51, pp.317-324.
• Shliomis M.I. (1972): Effective viscosity of magnetic suspensions. - Sov. Physics, JETP, vol.34, pp.1291-1294.
• Shukla J.B. and Kumar D. (2004): A theory for ferrofluid lubrication. - J. Magn. Magn. Mater., vol.65, pp.45-48.
• Sinha P., Chandra P. and Kumar D. (1993): Ferrofluid lubrication of cylindrical rollers with cavitation. - Acta Mech., vol.98, pp.27-38.
• Verma P.D.S. (1986): Magnetic fluid-based squeeze film. - Int. J. Eng. Sci., vol.24, pp.395-401.