Mechanical behaviour of glass during cyclic instrumented indentation

• Autorzy: Chorfa A. , Hamidouche M. , Madjoubi M. A. , Petit F.
• Języki publikacji: EN

Abstrakty

EN

Indentation techniques are largely used nowadays for characterizing the intrinsic mechanical properties of brittle materials. A cyclic indentation tests have been carried out on soda lime glass and borosilicate glass using an instrumented indentation apparatus. Repeated post-threshold Vickers indentations were made using various peak loads. The hardness, elastic modulus and fracture toughness of the two glasses were evaluated using the consecutive load-displacement curves. Their properties of were compared and discussed.

Słowa kluczowe

EN

glass; hardness; fatigue crack propagation; stress analysis

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2010
• Tom: Vol. 28, No. 1
• Strony: 255--263
• Opis fizyczny: Bibliogr. 24 poz.

Twórcy

autor

Chorfa A.

autor

Hamidouche M.

autor

Madjoubi M. A.

autor

Petit F.

• Department of Mechanics Faculty of Engineering Science Skikda University Algeria

Bibliografia

• [1] LAWN B.R., Fracture of Brittle Solids, 2nd Ed., Cambridge University Press, Cambridge, 1993.
• [2] OLIVER W.C., PHARR G.M., J. Mater. Res., 7 (1992), 1564.
• [3] PHARR G.M., Mater. Sci. Eng. A, 253 (1998), 151.
• [4] FISHER-CRIPPS A.C., Nanoindentation, 2nd Ed., Springer, New York, 2002.
• [5] NIX W.D., GAO H., J. Mech. Phys. Solids., 46 (1998), 411.
• [6] CORCORAN S.G., COLTON R.J., LILLEODDEN E.T., GERBERICH W.W., Phys. Rev. B, 55 (1997), 16057.
• [7] CLARKE D.R., TANDON R., Mater. Sci. Eng. A, 195 (1995), 207.
• [8] KRAFT O.K., SCHWAR Z., BAKER S.P., FREUND B., HULL R., Mater. Res. Soc., 673 (2001), 131.
• [9] TSUI T.Y., PHARR G.M., J. Mater. Res., 14 (1999), 292.
• [10] SWADENER J.G., TALJAT B., PHARR G.M., 16 (2001), 2091.
• [11] RANDALL N.X., CONSIGLIO R., Rev. Sci. Instrum., 71 (2000), 2796.
• [12] JARDRET V., LUCAS B.N., OLIVER W.C., RAMAMURTHY A.C., J. Coating Technol., 72 (2000), 79.
• [13] LI X.D., BHUSHAN B., Thin Solid. Films, 398 (2001), 313.
• [14] ANSTIS G.R., CHANTIKUL P., LAWN B.R., MARSHALL D.B., J. Amer. Ceram. Soc., 64, 9 (1981), 533.
• [15] LI X.D., BHUSHAN B., J. Mater. Charact., 48 (2002), 11.
• [16] LAWN B.R., MARSHALL D.B., J. Am. Ceram. Soc., 62 (1979), 347.
• [17] EVANS A.G., FULLER E.R., Metall. Trans. A, 5 (1974), 27.
• [18] GIGU F.J., Mater. Sci. Lett., 13 (1978), 1357.
• [19] DAUSKARDT R.H., YU W., RITCHIE R.O., J. Am. Ceram. Soc., 70 (1987), 248.
• [20] DILL S.J., BENNISON S.J., DAUSKARDT R.H., J. Am. Ceram. Soc., 80 (1997), 773.
• [21] REECE M.J., GUIU F., J. Am. Ceram. Soc., 73 (1990), 1004.
• [22] TAKAKURA E., HORIBE S., J. Mater. Sci., 27 (1992), 6151.
• [23] BANERJEE R., SARKAR B.K., Glass Sci. Technol., 68 (1995), 177.
• [24] SUZUKI K., BENINO Y., FUJIWARA T., KOMATSU T., J. Am. Ceram. Soc., 85 (2002), 3102.