PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Effectiveness of L-cysteine as a pre-reducing agent in the process of arsenic determination in natural materials by batch system hydride generation atomic absorption spectrometry (HG AAS)

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Efektywność L-cysteiny jako prereduktora w procesie oznaczania arsenu w materiałach naturalnych metodą atomowej spektrometrii absorpcyjnej z generowaniem wodorków w systemie dozującym
Języki publikacji
EN
Abstrakty
EN
The influence of various agents on the effectiveness of As(V) to As(III) pre-reduction in the presence of L-cysteine and arsine generation efficiency in the determination of total arsenic content in natural materials has been investigated. Determination was performed with batch hydride generation system (AAS). Under optimum conditions for arsine generation (HC1 and HNO(3): 1 mol L(-1), NaBH(4): 3% m/v, L-cysteine: over 0.05% m/v) the drop of the measured absorbance signal was observed. Optimum concentration of L-cysteine was established to be 0.03% m/v. This is significantly less than required for quantitative pre-reduction of As(V) to As(III), which is achieved for at least 10-fold higher L-cysteine concentration. The L-cysteine concentration, which is needed to perform the complete reduction of As(V) to As(III) as well as to achieve the precise results of determination, depends on the kind of the natural material examined and on the appropriate dilution of the sample before the measurement.
PL
Badano wpływ różnych czynników na efektywność wstępnej redukcji As(V) do As(III) z zastosowaniem L-cysteiny oraz wydajność procesu generowania arsyny w oznaczaniu całkowitej zawartości arsenu w materiałach naturalnych. Oznaczenia wykonywano w systemie batch hydride generation AAS. Stwierdzono, że w optymalnych dla badanego systemu warunkach generowania arsyny (stężenie kwasów: HC1 lub HNO(3) równe l mol L(-1) i stężenie NaBH4 równe 3% m/v) obecność L-cysteiny w próbce pomiarowej w stężeniu powyżej 0,05% m/v powoduje spadek wielkości absorbancji. Optymalne stężenie L-cysteiny w próbce pomiarowej wynosi 0,03% m/v. To stężenie znacznie różni się od wymaganego do ilościowej wstępnej redukcji As(V) do As(III), którą osiąga się przy stężeniu L-cysteiny co najmniej o rząd wielkości wyższym. Stężenie L-cysteiny niezbędne do całkowitej redukcji As(V) do As(III) zależy od rodzaju badanego materiału naturalnego. W celu uzyskania dokładnych wyników oznaczeń, konieczne jest prowadzenie wstępnej redukcji przy odpowiednim, dla danego materiału, stężeniu L-cysteiny i rozcieńczenie próbki przed pomiarem instrumentalnym.
Czasopismo
Rocznik
Strony
313--325
Opis fizyczny
Bibliogr. 34 poz.
Twórcy
autor
  • Institute of Chemistry, Faculty of Engineering, Chemistry and Applied Physics, Military University of Technology, 00-908, ul. Kaliskiego 2, Warsaw, Poland
autor
  • Institute of Chemistry, Faculty of Engineering, Chemistry and Applied Physics, Military University of Technology, 00-908, ul. Kaliskiego 2, Warsaw, Poland
  • Institute of Chemistry, Faculty of Engineering, Chemistry and Applied Physics, Military University of Technology, 00-908, ul. Kaliskiego 2, Warsaw, Poland
Bibliografia
  • 1. Hazardous Metals in the Environment, [M. Stoeppler, Ed.], Elsevier, Amsterdam 1992.
  • 2. Metals and their compounds in the Environment, [E. Merian, Ed.] VCH, 1991.
  • 3. Markiewicz J., Some of the problems of heavy metals toxicology, in: Chemical toxic substances in the environment and their influence on human health, [M. Gumińska, Ed.] PAN, Kraków 1990 (in Polish).
  • 4. Samanta G. and Chakraborti D., Fresenius J. Anal. Chem., 357, 827 (1997).
  • 5. Celkova A., Kubowa J. and Stresko V., Fresenius J. Anal. Chem., 355, 150 (1996).
  • 6. Le X-C., Cullen W.R. and Reimer K.J., Anal. Chim. Acta, 285, 277 (1994).
  • 7. Yin X., Hoffmann E. and Lüdke C., Fresenius J. Anal. Chem., 355, 324 (1996).
  • 8. Mierzwa J., Adeloyu S. and Dhindsa H.S., Analyst, 122, 539 (1997).
  • 9. Uggerund H. and Lund W., J. Anal. At. Spectrom., 10, 405 (1995).
  • 10. Reisner A. and Lund W., J. Anal. At. Spectrom., 11, 943 (1996).
  • 11. Brindle I.D., Alarabi H., Karshman S., Le X-C. and Zheng S., Analyst, 117, 407 (1992).
  • 12. Chen H., Brindle I.D. and Le X-C., Anal. Chem., 64, 667 (1992).
  • 13. Gomez-Ariza J.L., Sanchez-Rodas D., Giraldez I. and Morales E., Analyst, 125, 401 (2000).
  • 14. Beauchemin D., J. Anal. At. Spectrom., 13, 1 (1998).
  • 15. Näykki T., Perämäki P., Kujala J. and Mikkonen A., Anal. Chim. Acta, 439, 229 (2001).
  • 16. Zang X., Cornelis R., Kimpe J. and Mees L., Anal. Chim. Acta, 319, 177 (1996).
  • 17. Lamble K.J. and Hill S.J., Anal. Chim. Acta, 334, 261 (1996).
  • 18. Ochsenkühn-Petropulu M., Varsamis J. and Parissakis G., Anal. Chim. Acta, 337, 323 (1997).
  • 19. Burguera M. and Burguera J.L., Talanta, 44, 1581 (1997).
  • 20. Boampong C., Brindle I.D. and Ceccarelli Ponzoni C.M., J. Anal. At. Spectrom., 2, 197 (1987).
  • 21. Welz B. and Schubert-Jacobs M., Fresenius Z. Anal. Chem., 324, 833 (1986).
  • 22. Yamamoto M., Yasuda M. and Yamamoto Y., Anal. Chem., 57, 1382 (1985).
  • 23. Damkröger G., Grote M. and Jansen E., Fresenius J. Anal. Chem., 357, 817 (1997).
  • 24. Tyson J.F., Offley S.G., Seare N.J., Kibble H.A. and Fellows C., J. Anal. At. Spectrom., 7, 315 (1992).
  • 25. Sperling M., Yin X., Welz B., Spectrochim. Acta Part B, 46, 1789 (1991).
  • 26. Welz B. and Šucmanowá M., Analyst, 118, 1425 (1993).
  • 27. Welz B. and Šucmanowá M., Analyst, 118, 1417 (1993).
  • 28. Tsalev D.L., Sperling M. and Welz B., Talanta, 51, 1059 (2000).
  • 29. Howard A.G. and Salou C., J. Anal. At. Spectrom., 13, 683 (1998).
  • 30. Carrero P., Malave A., Burguera J.L., Burguera M. and Rondon C., Anal. Chim. Acta, 438, 195 (2001).
  • 31. Welz B. and Schubert-Jacobs M., J. Anal. At. Spectrom., 1, 23 (1986).
  • 32. Lugowska E. and Brindle I.D., Analyst, 122, 1559 (1997).
  • 33. Neffe S., Wieteska E., Drzewińska A. and Ziółek A., Biul. WAT, 10, 15 (2001) (in Polish).
  • 34. Wieteska E., Ziółek A., Drzewińska A., unpublished results.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPP1-0037-0015
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.