PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The use of 3D laser scanning technology in preservation of historical structures

Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Wykorzystanie technologii skanowania 3D w konserwacji obiektów zabytkowych
Języki publikacji
PL
Abstrakty
PL
Dokładne dane geometryczne to najistotniejsza kwestia w dziedzinie oceny bezpieczeństwa i ochrony historycznych konstrukcji. Fotogrametrię od lat wykorzystuje się z sukcesem do dokumentowania historycznych budowli. Dzięki postępowi technologii komputerowej w ostatnich latach możliwe jest two- rzenie dokumentacji stanu faktycznego bardzo dokładnie i w stosunkowo krótkim czasie. Tradycyjnie do zapisywania danych konstrukcji stosuje się total stations, zaś inne technologie to fotogrametria bliskiego zasięgu i skanowanie laserowe, które są metodami szybszymi i dokładniejszymi. Celem niniejszego badania było wskazać znaczenie realistycznego modelowania historycznych konstrukcji dla oceny stanu bezpieczeństwa oraz omówić metody uzyskiwania danych używane w dziedzinie konserwacji historycznych budowli ze szczególnym naciskiem na technologię skanerów laserowych.
EN
Accurate geometric data is the most important issue in the filed of safety evaluation and preservation of historical structures. Photogrammetry is successfully used to document historic buildings since many years. By the recent developments in the field of computer technology it is possible to create as built survey documentation in a very time efficient and accurate way. Traditionally total stations are used to record data of the structures and other techniques are close - range photogrammetry and laser scanning which are faster and precise methods. The aim of this study is to point out the importance of realistic geometric modeling of historic structures for evaluating the safety condition and to discuss data acquisition methods using in preservation of historical structures and stress particularly on the laser scanning technology.
Rocznik
Tom
Strony
659--669
Opis fizyczny
Bibliogr. 10 poz., fot.
Twórcy
autor
autor
  • YTU Faculty of Architecture, Structural Systems Division
Bibliografia
  • [1] Boeykens S., Santana M., Neuckermans H., Improving Architectural Design Analysis Using 3D Modeling and Visualisation Techniques, In: Proceedings of the 14th International Conference on Virtual Systems and Multimedia – VSMM, Cyprus 2008.
  • [2] Schueremans L., Van Genechten B., The Use of 3D Laser Scanning in Assessing the Safety of Masonry Vaults – A Case Study on the Church of Saint Jacobs, Optics and Lasers in Engineering (Journal of Elsevier), 2009, 47, 329 – 335
  • [3] L. Binda, A. Saisi, Research on Historic Structures in Seismic Areas in Italy, Journal of Wiley Interscience, 2005 (www.interscience.wiley.com) DOI: 10.1002/pse.194
  • [4] Debevec P.E., Modeling and Rendering Architecture from Photographs, University of California – Berkeley, PhD Dissertation, 1996.
  • [5] Baltsavias P.E., A Comparison Between Photogrammetry and Laser Scanning, ISPRS Journal of Photogrammetry & Remote Sensing, 1999, 54, pp. 83-84.
  • [6] Przybilla H.J., Peipe J., 3D Modeling of Heritage Objects by Fringe Projection and Laser Scanning Systems, XXI International CIPA Symposium, Athens, Greece, 2007.
  • [7] Vatan M., Arun G., Using Photogrammetric Data for Establishing 3D Finite Element Model of a Masonry Aqueduct, In: Proceedings of the XX. CIPA International Symposium, Torino, Italy, 2005.
  • [8] Erwin F., Kung J., Bukowski R., High – Definition surveying (HDS): A New Era in Reality Capture, International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, 2004, Vol. XXXVI – 8/W2.
  • [9] Encyclopedia of Istanbul (Dünden Bugüne İstanbul Ansiklopedisi), Volume 7, History Foundation of Turkey and Ministry of Culture and Tourism (Tarih Vakfi ve Kultur ve Turizm Bakanlıgı), Istanbul 1994.
  • [10] Selbesoglu M.O., Demet A., Yersel Lazer Tarayicilar ile Uc Boyutlu Modelleme ve Uygulaması,Yildiz Technical University, Civil Engineering Faculty, Division of Photogrammetry, Istanbul (graduation thesis), 2008.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPK6-0024-0065
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.