PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Powłoki cynkowe otrzymane w kąpieli WEGAL z dodatkiem antymonu

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
EN
Zinc coatings obtained in a WEGAL bath with an addition of antimony
Języki publikacji
PL
Abstrakty
PL
Przedstawiono wyniki cynkowania jednostkowego dwóch wybranych gatunków stali (St3S, 55) w kąpieli ZnAl0,1Ni0,1Mn0,1Sb0,1. Kąpiel ta powstała przez zastąpienie w stopie WEGAL składnika drogiej cyny tańszym dodatkiem antymonu. Ustalono, że zastosowane dodatki antymonu nie wywołały zmiany w kinetyce przyrostu powłok z czasem na obydwu badanych stalach. Osiągnięcie kwiatowego wyglądu powłok możliwe jest już po dodaniu do kąpieli najmniejszej ilości antymonu (0,03%). Otrzymane powłoki są jednakowego typu na każdej z cynkowanych stali. W próbie zginania wszystkie powłoki wykazały bardzo dobrą plastyczność i prawidłową przyczepność dyfuzyjną do podłoża stalowego. Miały gładki, jasny i błyszczący wygląd. Taki wygląd powłok, uzupełniony kwiatowym obrazem, przyjęty jest jako standard. Opisane powłoki otrzymano również na stalach reaktywnych.
EN
Test results of batch galvanising of two selected steel grades (St3S, 55) in a ZnAl0,1Ni0,1Mn0,1Sb0,1 bath have been presented. The bath was prepared from the WEGAL alloy, in which expensive tin has been replaced by cheaper antimony. It was found that an addition of antimony did not change the kinetics of the coating growth in time on both steel grades under investigation. Obtaining a spangled appearance of galvanized coatings can be achieved with the smallest addition of antimony to the bath (0.03%). The coatings obtained on both steel grades were of the same type. Bending tests conducted on all the coatings, showed they had high plasticity and exhibited good diffusive adhesion to the steel substrate. Their appearance was smooth, bright and glossy. Such an appearance, supplemented with a spangled image has been accepted as a standard. The described coatings were also obtained on reactive steels.
Rocznik
Tom
Strony
308--310
Opis fizyczny
Bibliogr. 14 poz., il.
Twórcy
Bibliografia
  • 1. Schubert P., Schulz W.D., Katzung W., Rittig R.: Metall 1999, t.53, s. 260.
  • 2. Katzung W., Rittig R., Gellhar A.: Metall 1996, t. 50, s. 34.
  • 3. Schubert P., Schulz W.D.: Metall 2001, t. 55, s. 743.
  • 4. Maaβ P., Peiβker P.: Handbuch Feuerverzinken, Leipzig, Stuttgart 1993, Deutscher Verlag für Grundstoffindustrie.
  • 5. Hansel G.: Metall 1980, t. 34, s. 828.
  • 6. Dreulle N., Dreulle P., Vacher J.C.: Metall 1980, t. 34, s. 834.
  • 7. Sjoukes F.: Draht 1980, t. 31, s. 915.
  • 8. Böttcher H. J.: Metall 1984, t. 38, s. 862.
  • 9. Pelerin J., Coutsouradis D., Foct J.: Mémoires et Etudes Scientifi ques reve de metallurgie 1985, t. 82, s. 191.
  • 10. Gloriant T., Reumont G., Perrot P.: Z. Metallkde 1997, t. 88, s. 539.
  • 11. Reumont G., Mathon M., Fourmentin R., Perrot P.: Z. Metallkd. 2003, t. 94,s. 411.
  • 12. Reumont G., Dupont G., Perrot P.: Z. Metallkd. 1995, t. 86, s. 608.
  • 13. Gagné M.: Metall 1999, t. 53, s. 269.
  • 14. Wesołowski J., Głuchowski W.: XI Sympozjum Polskiego Towarzystwa Cynkowniczego, Ustroń, 19-21 maja 2004, Mat. Konf. 2004, s. 31-44.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPB5-0001-0018
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.