Environmental orientation in technical objects development and operation.

• Autorzy: Kłos Z.

Warianty tytułu

PL

Rozwój i eksploatacja obiektów technicznych - zorientowane środowiskowo.

• Języki publikacji: EN

Abstrakty

EN

The reduction of the impact of products is the challenge nowadays. Several general approaches environmentally conscious, from the smallest scope of concern to largest are presented in this paper.

PL

Ograniczanie oddziaływań produktów jest współcześnie traktowane jak wyzwanie. W artykule zaprezentowano kilka ogólnych sposobów podejścia do ujmowania zagadnień środowiskowych od tych o wąskim do tych o szerokim spektrum rozpatrywanych problemów.

Słowa kluczowe

EN

technical object; development; environmental approaches

PL

obiekt techniczny; rozwój; podejścia środowiskowe

• Wydawca: Komitet Budowy Maszyn PAN
• Czasopismo: Zagadnienia Eksploatacji Maszyn
• Rocznik: 2003
• Tom: Vol. 38, nr 4
• Strony: 153--165
• Opis fizyczny: Bibliogr. 19 poz.

Twórcy

autor

Kłos Z.

• Politechnika Poznańska, Instytut Maszyn Roboczych i Pojazdów Samochodowych, ul. Piotrowo 3, 60-965 Poznań, tel. [phone], fax [phone],

Bibliografia

• [1] Ryan C., Life cycles analysis and design - a productive relationship? Proceedings of First National Conference on LCA. Melbourne 1996.
• [2] Coulter S., Bras B., Foley C., A lexicon of green engineering terms. International Conference on Engineering Design ICED 95, Praha 1995.
• [3] Treeman H., Harten T., Springer J., Randall P., Curran M.A., Stone K., Industrial pollution prevention: A critical review. J. of the Air and Waste Management Association, vol.42, №5, 1992.
• [4] Matysiak L.M., Cost-benefit analysis for design of environmentally conscious manufacturing. Int. J. of Environmentally Conscious Design & Manufacturing, vol.42, №3, 1993.
• [5] Ashley S., Design for the environment. Mechanical Engineering, vol.1 15, №3. 1993.
• [6] Olsen J., Keldman T., Design for environment a framework. 9th International Conference on Engineering Design, The Hague 1993.
• [7] Navin-Chandra D., Design for environmentability. Design Theory and Methodology, vol. DE-31, 1991.
• [8] Von der Horst T.J.J., Zweers A., Environmentally oriented product development; Various approaches to success. 9th International Conference on Engineering Design, The Hague 1993.
• [9] Keoleian G., Menerey D., Life cycle design guidance manual. U.S.EPA Office of Research and Development, Washington DC 1993.
• [10] Aslting L., Joergenson J., The life cycle concept as a basis for sustainable industrial production. Annals of the CIRP, vol.42, № 1, 1993.
• [11] Calkins D.E., Gaevert R.S., Michel F.T., Richter K.J., Aerospace system unified life cycle engineering: producibility measurement issues. IDA Paper P-2151 Institute for Defeuse analyses, Alexandria, Virginia 1989.
• [12] U.S. Congress, Office of Technology Assessment. Green products by design: choices for a cleaner environment. U.S. Government Printing Office, Washington DC 1992.
• [13] Frosch R., Gallopoules N., Strategies for manufacturing. Scientific American, vol.261, №3, 1989.
• [14] Richards D., Fullerton A., Industrial ecology: US-Japan perspectives. National Academy Press, Washington DC 1994.
• [15] Assessing the environmental consumer market. US Environmental Protection Agency, Washington DC 1991.
• [16] Gause D.G., Weinberg G.M., Requirements: Quality before design. Dorset House, New York 1989.
• [17] Ishikawa K., What is total quality control. The Japanese way. Prentice Hall, Englewood Cliffs 1985.
• [18] Kłos Z., Środowiskowa ocena maszyn i urządzeń. Wydawnictwo Politechniki Poznańskiej, Poznań 1998.
• [19] Hollins В., Pugh S., Successful product design: What to do and when. Butterworths, Boston 1989.