On contemporary methods of residual stress analysis.

• Autorzy: Bijak-Żochowski Marek

Warianty tytułu

PL

Współczesne metody analizy naprężeń własnych.

• Języki publikacji: EN

Abstrakty

EN

The residual stress analysis is discussed in the paper. However, the author has not intended to present, even partialy, all apects of this very broad problem. The aim of this work has been limited to a review of contemporarily used experimental, numerical and hybrid methods, and to outline the directions of possible developments.

PL

W artykule są omawiane problemy analizy naprężeń własnych. Intencją autora nie jest jednakże przedstawienie, nawet częsciowe, wszystkich aspektów tego bardzo szerokiego zagadnienia. Cel tej pracy jest ograniczony do przeglądu współczesnych eksperymentalnych, numerycznych i hybrydowych metod badawczych i wskazanie tendencji dalszego rozwoju.

Słowa kluczowe

EN

residual stresses; experimental method; numerical method; hybrid method

PL

naprężenia własne; metoda eksperymentalna; metoda numeryczna; metoda hybrydowa

• Wydawca: Komitet Budowy Maszyn PAN
• Czasopismo: Archive of Mechanical Engineering
• Rocznik: 2000
• Tom: Vol. XLVII, nr 1
• Strony: 53--82

Twórcy

autor

Bijak-Żochowski Marek

• Warsaw University of Technology, Institute of Aeronautics and Applied Mechanics, ul. Nowowiejska 24, 00-665 Warsaw, Poland

Bibliografia

• [1] Heyn E.: Internal Strains in Cold Wrought Metals and same Troubles Caused Thereby. Journal Institute of Metals, vol. 12, 1914, pp. 27-35.
• [2] Groom J.I.: Determination of Residual Stresses in Rails. Battelle Columbus Laboratories, May 1983.
• [3] Kujawinska M., Sałbut L., Olszak A., Forno C.: Automatic analysis of residual stresses in rail using grating interferometry. Recent Advances in Experimental Mechanics, ed. J.F.S. Games et al., v. 2, 1994, AA Balkena, Rotherdam, 1994, pp. 699-704.
• [4] Bijak-Żochowski M., Tracz M.: Investigation of residual stress distribution in a rail head. Journal of Strain Analysis, vol. 29, No 1, 1994, pp. 73-78.
• [5] Persson C., Jönsson G., Bergmark A.: Measurement of Residual Stresses Profiles with the Layer Removal Technique: The Fifth International Conference on Residual Stress, Linköping University (Sweden), June 1997, Proceedings, pp. 817-822.
• [6] Mc Grann R.T.R., Rybicki E.F., Shadley J.R.: Applications and Theory of the Modified Layer Removal Method for the Evaluation of Through-Thickness Stresses in Thermal Spray Coated Materials. The Fifth International Conference on Residual Stress, Linköping University (Sweden), June 1997, Proceedings, pp. 994-999.
• [7] Koo J., Valgur J.: Residual stress determination in plates using layer growing / removing methods. Experimental Mechanics, Allison J.M. (ed.), Balkema, Rotterdam, 1998, pp. 1307-1311.
• [8] Mathar J.: Determination of Initial Stress by Measuring the Deformation around Holes. Transaction ASME, No 56, 1939, pp. 59-71.
• [9] Bijak-Żochowski M.: Półniszcząca metoda wiercenia małego otworu do pomiaru rozkładu naprężeń własnych w głąb materiału. Osiowosymetryczny stan naprężenia. Archiwum Budowy Maszyn, (A Trepanation Method for Determining the Residual Stress in Function of Depth. The Case of Axisymmetric State of Stress. The Archive of Mechanical Engineering), No 3, 1997, pp. 489-509, (in Polish).
• [10] Bijak-Żochowski M.: Półniszcząca metoda wiercenia małego otworu do pomiaru rozkładu naprężeń własnych w głąb materiału. Dowolny stan naprężenia. Archiwum Budowy Maszyn, (A Trepanation Method for Determining the Residual Stress in Function of Depth. The Case of an Arbitrary State of Stress. The Archive of Mechanical Engineering), No 2, 1978, pp. 341-361, (in Polish).
• [11] Bijak-Żochowski M.: A semidestructive method of measuring the residual stress. VDI-Berichte, Nr 313, 1978, pp. 469-476.
• [12] Shajer G.S: Applications of Finite Element Calculations to Residual Stress Measurements. Journals of Engineering Materials an Technology, vol. 103, April 1981, pp. 157-163.
• [13] Nelson D.V., Mc Crickerd J.T.L: Residual Stress Determination Through Combined Use of Holographic Interferometry and Blind-Hole Drilling. Experimental Mechanics, December 1986, pp. 371-378.
• [14] Wang Jia-Yong: Measurement of Residual Stress by the Hole-Drilling Method: On the Direction of Maximum Residual Stress; Experimental Mechanics, March 1988, pp. 24-26.
• [15] Wu Zhu and Lu Jian: Residual stresses by Moiré Interferometry and Incremental Hole Drilling. Experimental Mechanics, Allison J.M. (ed.), Balkema, Rotterdam 1998, pp.1319-1324.
• [16] Granada Garcia A.A., George D., Smith D.J.: Assessment of distortions in the deep hole technique for measuring residual stresses. Experimental Mechanics, Allison J.M. (ed.), Balkema, Rotterdam 1998, pp.1301-1306.
• [17] Wu Zhu, Lu Jian, Jouland P.: Study of Residual Stress Distribution by Moiré Interferometry Incremental Hole Drilling Method. The Fifth International Conference on Residual Stress, Linköping University (Sweden), June 1997, Proceedings, pp. 804-809.
• [18] Chang W., Finnie I.: Measurement of residual stresses near the surface using the crach compliance method. ASME Journals of Engineering Materials and Technology, Nr 113, 1990, pp. 199-204.
• [19] Schindler H.J., Bertshinger P.: Some Steps Towards Automation of the Crack Compliance Method to Measure Residual Stress Distributions. The Fifth International Residual Stress Conference, Linköping University (Sweden), June 1997. Proceedings, pp. 682-687.
• [20] Tochilin S.„ Nowell D., Hills D.A.: Residual stress measurements by the crack compliance technique. Experimental Mechanics, Allison J.M. (ed.), Balkena Rotterdam, 1998, pp. 1313-1318.
• [21] Orłoś Z.: Une méthode de mesure des contraintes résiduelles. Revue Française de Mechanique, Nr 7/8, 1963, pp 7-15.
• [22] Bijak-Żochowski M.: Investigation of residual stress on the surface of the body by penetration method. VDI Berichte. Nr 514. 1984 pp. -.
• [23] Bijak-Żochowski M.: Nondestructive investigation of residual stress in hardened surface layers. The Archive of Mechanical Engineering, No 1, 1993, pp. 29-53,
• [24] SAE: Residual Stress Measurement by X-Ray Diffraction. SAE Journal 784a, Society of Automative Engineers Inc. 1971.
• [25] Ruud C.O., Former G.D.: Residual Stress Measurement By X-Rays; Errors Limitations and Applications; Nondestructive Evaluation of Materials, Ed. by Burke J.J. and Weiss W., Plenum Press, 1979, pp. 101-116.
• [26] Klug H.P., Alexander L.E.: X-Ray Diffraction Procedures 2nd ed., New York, J. Wiley and Sons, 1974, pp. 768-770.
• [27] Meert B., Quaeyhaegens C., Knuyt G., Janssen H., Stals L.M.: New approach for the measurement of residual macroscopic stresses on highly preferentially oriented thin films using X-ray diffraction. The Fifth International Conference on Residual Stress, Linkôping University (Sweden). June 1997. Proceedings, pp. 522-527.
• [28] He B.B., Smith L.K.: A New Method for Residual Stress Measurement Using an Area Detector. The Fifth International Conference on Residual Stress, Linköping University (Sweden), June 1997, Proceedings, pp. 634-639.
• [29] Hennion V.. Sprauel J.M., Michaud H.: Residual Stress Evaluation by X-Ray Diffractometry Application for Materials Surfaces with High Stress Gradients. The Fifth International Conference on Residual Stress, Linkôping University (Sweden), June 1997, Proceedings, pp. 670-675.
• [30] Hayashi M., Okhido S., Minakawa N., Yukio M,: Residual Stress Distribution Measurement in Plasticity Bent Carbon Steel by Neutron Diffraction. The Fifth International Conference on Residual Stress, Linköping University (Sweden), June 1997, Proceedings, pp. 762-769.
• [31] Holden T.M., Root J.H., Holt R.A., Hayaski M.: Neutron-diffraction measurements of stress. Physica B 213/214, 1995, pp. 793-796.
• [32] Winholtz R.A., Krawitz A.D.: Aspects of Neutron Diffraction Triaxial Stress Tensor Measurement. The Fifth International Conference on Residual Stress, Linkôping University (Sweden), June 1997, Proceedings, pp. 588-603.
• [33] Wang D.Q., Edwards L.: Evaluation of the Systematic Errors Associated with Strain Measurement Using Neutron Diffraction. The Fifth International Conference on Residual Stress, Linköping University (Sweden), June 1997, Proceedings, pp. 628-633.
• [34] Brand P.C., Prask H.J., Hutchings M.T., Butlle D.J., Gaff J.P.: Residual Stresses in Bent Stell Tubes Measured by means of Neutron Diffraction and Magnetic Methods. The Fifth International Conference on Residual Stress, Linköping University (Sweden), June 1997, Proceedings, pp. 622-621.
• [35] Deputat J.: Własności i wykorzystanie zjawiska elastoakustycznego do pomiaru naprężeń własnych. Prace Instytutu Podstawowych Problemów Techniki PAN, (The Properties and Applications of the Elastoacoustic Phenomenon for Measuring Residual Stress. Works of the Institute of Fundamental Technical Research, Polish Academy of Science), No 28, 1987 (in Polish).
• [36] European Rail Research Institute: Nondestructive Measurements of Residual Stresses in Rails Using Ultrasonic Methods, UIC, D-173 Report 12, Utrecht, 1994.
• [37] Sundström O., Törrönen K.: The use of Barkhausen Noise Analysis in Nondestructive Testing. Materials Evaluation, February 1979, pp. 51-56.
• [38] Allison H.D., Hendrics R.W.: Correlation of Barkhausen Noise Signal and X-Ray Residual Stress Determinations in Grinding-Burned 52100 Steel. The Fifth International Conference on Residual Stress Linköping University (Sweden), June 1997, Proceedings, pp. 610-645.
• [39] Grum J., Zerownik P., Dušan F.: Identification of Structural Changes and Residual Stresses Based on Magnetic Barkhausen Noise. The Fifth International Conference on Residual Stress, Linköping University (Sweden), June 1997, Proceedings, pp. 588-603. June 1997, Proceedings, pp. 694-702.
• [40] Mountais D.S., Cooper G.P.: TERSA-A new technique for assessing residual stress. Strain, February 1989, pp. 15-19.
• [41] Bijak-Żochowski M. Marek P.: Residual stress in some elasto-plastic problems of rolling contact with friction. International Journal of Mechanical Sciences, vol. 39, No 1, 1996, pp. 15-32.
• [42] Marek P.: Residual stresses in 3D problem of rail - wheel contact. Proceedings of the Seventh International ANSYS Conference and Exhibition, Pittsburgh, 1996, pp. 301-308.
• [43] Karmowski W., Magiera J., Orkisz J..: Enhancement of Experimental Results by Constrained Minimization. Residual Stress in Rails Effect on Rail Integrity and Railroad Economics, Kluver Academics Publisher, Dordrecht, Boston, London, 1992, pp. 207-217.
• [44] Karmowski W.: A Numerical Interpretation of the Residual Stress Measurements. The Fifth International Conference on Residual Stress, Linköping University (Sweden), June 1997, Proceedings, pp. 793-798.
• [45] Sałbut L., Holstein D.: Laser weldment properties analysis by hybrid experimental - numerical method. Proc. SPIE, v. 3745, 1999, pp. 257-263.