Intermetallic compound based Fe-40Al AS-cast alloy-chemical composition microstructure and properties.

• Autorzy: Barcik J. , Cebulski J.
• Konferencja: AMT'98 XVth Physical Metallurgy and Materials Science Conference 'Advanced materials & technologies' 17-21 May, 1998, Kraków-Krynica, Poland.
• Języki publikacji: EN

Abstrakty

EN

The work presents results of studies of intermetallic compound based Fe-40Al alloy after primary crystallization. Chemical composition of the alloy was established through many year's experiences. Possibilities and limitations of the obtained material's plastic working were of especial interest. Course of crystallization in casting mould was also analysed.

Słowa kluczowe

EN

intermetallic compounds; iron; Armco iron; aluminium; titanium; chromium; boron; alloy; primary crystallization; plastic working; crystallization

PL

związki międzymetaliczne; żelazo; żelazo Armco; aluminium; tytan; chrom; bor; stop; krystalizacja pierwotna; obróbka plastyczna; krystalizacja

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Inżynieria Materiałowa
• Rocznik: 1998
• Tom: R. XIX, nr 4
• Strony: 901--904
• Opis fizyczny: Bibliogr. 5 poz., tab., rys.

Twórcy

autor

Barcik J.

• Institute of Metals Phisics and Chemistry, Silesian University

autor

Cebulski J.

• Department of Materials Science, Silesian University of Technology

• Silesian University of Technology, Institute of Metals Physics and Chemistry

Bibliografia

• [1] Barcik J., Cebulski J. Stop na osnowie związku międzymetalicznego FeAl, struktura i własności technologiczne. – Inż. Mat. (in print).
• [2] Bystrzycki, R. A. Varin, Zb. Bojar – Inż. Mat. nr 5 (94) (1996) 137.
• [3] Ed. S. H. Whang, D. P. Pope, CT Lin – Mat. S § Eng A 152 (1991) Proc. of Second Intermetoid ASM Conf. on High temperature aluminides and intermetalics, September 16-19, 1991.
• [4] Khan, S. Naka, P. Veyssiere, P. Costa – Intermetalics for structure application. Proc. Conf. High temperature materials for power engineering 24-27. 09. 1990.
• [5] J. Baker Flaw and fracture of FeAl. Processing, properties and application of iron – aluminides, ed. J. H. Schenibel and M. M. Crimp. Minerals, Metalls and Materials Society 994.