Utilization of waste glass and ceramic tiles in concrete as aggregate

• Autorzy: Almaleeh Abubaker M , Shitote Stanley M. , Nyomboi Timothy

Warianty tytułu

PL

Wykorzystanie odpadowego szkła i płytek ceramicznych w betonie jako kruszywa

• Języki publikacji: EN PL

Abstrakty

EN

Due to high generation of solid waste materials around the world, the reuse of solid waste becomes indispensable in order to make them environmentally friendly. Therefore, the utilization of solid waste minimizes the amount of disposal, the solid waste management cost, and natural resource consumption. In this study, waste glass and ceramic tiles were used in concrete instead of aggregate. Experiment was conducted in three stages. The first and second stages focused on the glass-concrete and ceramic-concrete respectively. Meanwhile, the third stage consists blend of glass and ceramic tiles together. These concretes were compared to conventional concrete. The results showed that blending of waste glass and ceramic tiles aggregates can be utilized partially. Improvement in the mechanical characteristics of the non-conventional concrete was observed.

PL

Ze względu na wysoki poziom wytwarzania odpadów stałych na całym świecie ponowne ich wykorzystanie staje się niezbędne, aby uczynić je przyjaznymi dla środowiska. Dlatego wykorzystanie odpadów stałych minimalizuje zarówno dostępną ich ilość, koszty gospodarki odpadami stałymi, jak i zużycie zasobów naturalnych. Odpady szklane i płytki ceramiczne zastosowano w niniejszym badaniu zamiast kruszywa w betonie. Eksperyment przeprowadzono w trzech etapach. Pierwszy i drugi etap dotyczyły odpowiednio betonu ze szkłem i betonu z ceramiką. Podczas gdy trzeci etap polegał na połączeniu szkła i płytek ceramicznych. Otrzymane betony porównano z betonem konwencjonalnym. Wyniki pokazały, że częściowo można wykorzystać mieszanie kruszywa szklanego i płytek ceramicznych. Zaobserwowano poprawę właściwości mechanicznych betonu niekonwencjonalnego.

Słowa kluczowe

EN

glass; ceramic tiles; compressive strength; splitting tensile strength; flexural strength

PL

szkło; płytki ceramiczne; wytrzymałość na ściskanie; wytrzymałość na rozciąganie przy rozłupywaniu; wytrzymałość na zginanie

• Wydawca: Polskie Towarzystwo Ceramiczne
• Czasopismo: Materiały Ceramiczne
• Rocznik: 2019
• Tom: T. 71, nr 2
• Strony: 127--144
• Opis fizyczny: Bibliogr. 38 poz., rys., tab.

Twórcy

autor

Almaleeh Abubaker M

• Structural Engineering Department, Pan African University, Institute for Basic Sciences, Technology and Innovation, at Jomo Kenyatta University of Agriculture and Technology (JKUAT), Juja, Kenya

autor

Shitote Stanley M.

• Moi University, Department of Civil and Structural Engineering, Kesses, Kenya

autor

Nyomboi Timothy

• Structural Engineering Department, Pan African University, Institute for Basic Sciences, Technology and Innovation, at Jomo Kenyatta University of Agriculture and Technology (JKUAT), Juja, Kenya

Bibliografia

• [1] Daniyal, M., Ahmad, S.: Application of Waste Ceramic Tile Aggregates in Concrete, Int. Innovat. Res. Sci. Eng. Techn., 4, 12, (2015), 12808–12815, DOI: 10.15680/IJIRSET.2015.0412128.
• [2] Zimbili, O., Salim, W., Ndambuki, M.: A Review on the Usage of Ceramic Wastes in Concrete Production, Civil Environ. Eng., 8, 1, (2014), 91–95.
• [3] Chesner, W. H., Collins, R. J., MacKay, M. H.: User Guidelines for Waste and By-product Materials in Pavement Construction, Publication No. FHWA-RD-97-148, US Department of Transportation, Federal Highway Administration, 1998.
• [4] Batayneh, M., Marie, I., Asi, I.: Use of Selected waste materials in concrete mixes, Waste Manag., 27, (2007), 1870-1876.
• [5] Dahlén, L., Lagerkvist, A.: Pay as you throw: strengths and weaknesses of weightbased billing in household waste collection systems in Sweden, Waste Manag., 30, 1, (2010), 23–31, DOI: 10.1016/j.wasman.2009.09.022
• [6] ASTM C373-88(2006), Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products.
• [7] ASTM C650-04(2004), Standard Test Method for Resistance of Ceramic Tile to Chemical Substances.
• [8] García-González, J., Rodríguez-Robles, D., Juan-Valdés, A., Morán-del Pozo, J. M., Guerra-Romero, M. I.: Ceramic ware waste as coarse aggregate for structural concrete production, Environ. Technol., 36(23), (2015), 3050-3059, DOI: 10.1080/09593330.2014.951076.
• [9] Tabak, Y., Kara, M., Günay, E., Yildirim, S. T., Yilmazo, Ş.: Ceramic Tile Waste As a Waste Management Solution for Concrete, 3rd International Conference on Industrial and Hazardous Waste Management, Chania (Crete, GR), September 12-14th, (2012).
• [10] Poon, C., Chan, D.: The use of recycled aggregate in concrete in Hong Kong, Res. Con. Rec., 50, (2007). 293–305, DOI: 10.1016/j.resconrec.2006.06.005.
• [11] Fathi bin Asrul, M.,: Ceramic Tiles Waste as Coarse Aggregates Partial Replacement for Concrete Production, Project Report submitted as partial fulfilment of the requirements for the award of the degree of B. Eng (Hons) Civil Engineering, Faculty of Civil Engineering & Earth Resources, University Malaysia Pahang.
• [12] Senthamarai, R. M., Devadas Manoharan, P.: Concrete with ceramic waste aggregate, Cem. Conc. Comp., 27(9-10), (2005), 910–913, DOI: 10.1016/j.cemconcomp.2005.04.003.
• [13] Wu, S., Zhong, J., Zhu, J., Wang, D.: Influence of demolition waste used as recycled aggregate on performance of asphalt mixture, Road Mater. Pav. Des., 14, 3, (2013) 679-688, DOI: 10.1080/14680629.2013.779304.
• [14] Sekar, T., Ganesan, N., Nampoothiri, NVN.: Studies on Strength Characteristics on Utilization of Waste Materials as Coarse Aggregate in Concrete, Int. J. Eng. Sci. Techn. (IEST), 3, 7, (2011), 5436–5440.
• [15] Singh, P., Singla, R. K.: Utilization of Waste Ceramic Tiles as Coarse Aggregate in Concrete”, J. Multidis. Eng. Sci. Techn. (JMEST), 2, 11, (2015), 3294-3300.
• [16] Marwein, B. M. R., Sneha, M., Bharathidasan, I.: A review paper on utilisation of ceramic waste in concrete, Int. J. Sci. Eng. Res. (IJSER), 7, 4, (2016), 247–250.
• [17] Shruthi, H. G., Gowtham Prasad, M. E., Taj, S., Pasha, S. R.: Reuse of Ceramic Waste as Aggregate in Concrete, Int. Res. J. Eng. Techn. (IRJET), 3, 7, (2016), 115-119.
• [18] Mashitah, M. D., Kin, C. C., Badorul, A. H.: Recycling of homogenous ceramic tiles for the production of concrete block, International Symposium on Environmental Management: Hazardous-Environmental Management toward Sustainability, 22-23 September 2008, Thailand, 60–62.
• [19] Hemanth Kumar, Ch, Ananda Ramakrishna, K.,. Sateesh Babu, K., Guravaiah, T., Naveen, N., Sk, J.: Effect of Waste Ceramic Tiles in Partial Replacement of Coarse and Fine Aggregate of Concrete, Int. Adv. Res. J. Sci. Eng. Techn. (IARJSET), 2, 6, (2015), 13–16, DOI: 10.17148/IARJSET.2015.2604.
• [20] Swathi, J., Gnanadevi, V.: An Experimental Investigation on Concrete by Partial Replacement of Copper Slag for Fine Aggregate and Ceramic Waste with Coarse Aggregate, Int. J. Em. Techn. Comp. Sci. Electr. (IETCSE), 13(4), (2015), 137–142.
• [21] Ahire, A. V, Pawar, L. D., Patil, R. N.: Mechanical Properties of Concrete Incorporating Waste Ceramic Tiles and Waste Foundry Sand, Int. J. Cur. Tr. Eng. Res. (IJCTER), 2, 3, (2016), 96–102.
• [22] Gomes, M., de Brito, J.: Structural Concrete with Incorporation of Coarse Recycled Concrete and Ceramic Aggregates : Durability Performance, Mater. Struct., 42, 5, (2009), 663–675, DOI. 10.1617/s11527-008-9411-9.
• [23] Qadir, S. S.: Strength and Behavior of Self Compacting Concrete with Crushed Ceramic Tiles as Partial Replacement for Coarse Aggregate and Subjected to Elevated Temperature, Int. J. Eng. Techn. Manag. Appl. Sci. (IJETMAS), 3, 4, (2015), 278–286.
• [24] Azeez, S., Raju, R., Sreemahadevan Pillai, P. R.: Partial Replacement of Fine Aggregate & Cement in Concrete with Ceramic Rejects, Int. J. Eng. Tr. Techn. (IJETT), 28, 5, (2015), 243–247.
• [25] Rajora, V.,Bansal, H., Singh Sidhu, G.: Effect of Partial Replacement of Fine and Coarse Aggregate (10mm ) with Ceramic Waste on the Properties of Concrete, Int. J. Sci. Res. (IJSR), 5, 8, (2016), 2015–2017.
• [26] Mas, M. A., Monzó, J., Payá, J., Reig, L., Borrachero, M. V.: Ceramic tiles waste as replacement material in Portland cement, Adv. Cem. Res., 28, 4, (2016), 221–232, DOI: 10.1680/jadcr.15.00021.
• [27] Koyuncu, H., Guney, Y., Yilmaz, G., Koyuncu, S., Bakis, R.: Utilization of Ceramic Wastes in the Construction Sector, Key Eng. Mater., 264-268, (2004), 2509–2512, DOI: 10.4028/www.scientific.net/KEM.264-268.2509.
• [28] Meyer, C.: The greening of the concrete industry, Cem. Concr. Comp., 31, 8, (2009). 601–605, DOI: 10.1016/j.cemconcomp.2008.12.010.
• [29] Zubaidah Abdullateef M. A. Al-Bayati: Mechanical Properties and Behavior of Sustainable Concrete, J. Eng. Develop., 17, 2, (2013), 19–33.
• [30] Arnold, G., Werkmeister, S., Alabaster, D.: The effect of adding recycled glass on the performance of basecourse aggregate, NZ Transport Agency Research Report 351, 2008.
• [31] Liang, Hong, Zhu, Huiying, Byars, Ewan A.: Use of waste glass as aggregate in concrete, (September), 7th UK CARE Annual General Meeting, UK Chinese Assosiation of Resources and Environment, Greenwich 2007, 1–7.
• [32] Shayan, A.: Value-added Utilisation of Waste Glass in Concrete, IABSE Symposium Report, 2002, 1–11.
• [33] Siam, A. A.: Properties of Concrete Mixes with Waste Glass, A Thesis Submitted in Partial Fulfilment of the Requirement for the Degree of Master of Science in Civil Engineering Rehabilitation and Design of Structures, Faculty of Engineering, The Islamic University of Gaza, 2007.
• [34] Du, H., Tan, K. H.: Concrete with recycled glass as fine aggregates. ACI Mater. J., 111, 1, (2014), 47-57.
• [35] Malik, M. I., Bashir, M., Ahmad, S., Tariq, T., Chowdhary, U.: Study of Concrete Involving Use of Waste Glass as Partial Replacement of Fine Aggregates, IOSR J Eng. (IOSRJEN), 3, 7, (2013), 2278-8719.
• [36] Vijayakumar, G., Vishaliny, H., Govindarajulu, D.: Studies on Glass Powder as Partial Replacement of Cement in Concrete Production, Int. J. Emer. Techn. Adv. Eng. (IJETAE), 3, 2, (2013), 153-157.
• [37] Neville, A. M.: Properties of Concrete, Journal of General Microbiology, (Vol. Fourth), (2011), DOI: 10.4135/9781412975704.n88
• [38] ACI 211.1-91, (1997), Standard Practice for Selecting Proportions for Normal Heavyweight, and Mass Concrete, ACI 211.1-91. Manual of Concrete Practice, (Reapproved 2002), 1–38.