Evaluation criteria of the belt conveyor using the AHP method and selection of the right conveyor by Hurwitz method

• Autorzy: Jovčić Stefan , Průša Petr , Nikolicic Svetlana

Identyfikatory

DOI

10.12913/22998624/92092

• Języki publikacji: EN

Abstrakty

EN

The subject of the research paper is evaluation of different criteria that ought to be taken into consideration while deciding about conveyor type. Analythical Hierarchy Process (AHP) is a well known multicriteria analysis method in evaluation of criteria. Five experts in the field of conveyor transport have been consulted and according to that evaluation was performed. After that, Hurwitz method was used on the particular case including some of the subcriterias of evaluated criteria by the experts and the best solution of the belt conveyor has been selected.

Słowa kluczowe

EN

AHP method; conveyor; multi-criteria analysis; Hurwitz method

PL

metoda AHP; transporter; analiza wielokryterialna; metoda Hurwitza

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2018
• Tom: Vol. 12, no 2
• Strony: 137--143
• Opis fizyczny: Bibliogr. 17 poz., fig., tab.

Twórcy

autor

Jovčić Stefan

• University of Pardubice, The Faculty of Transport Engineering, Studentská 95, 532 10 Pardubice, Czech Republic

autor

Průša Petr

• University of Pardubice, The Faculty of Transport Engineering, Studentská 95, 532 10 Pardubice, Czech Republic

autor

Nikolicic Svetlana

• Faculty of Technical Sciences, University of Novi Sad, Dr Zorana Đinđića 1, 21101 Novi Sad, Republic of Serbia

Bibliografia

• 1. Burdzik R., Ciesla M. and Sładkowski, A. Cargo loading and unloading efficiency analysis in multi-modal transport. Promet - Traffic - Traffico 26(4), 2006, 323-331.
• 2. Honus S., Bocko P., Bouda T., Ristović I. and Vulić M. The effect of the number of conveyor belt carrying idlers on the failure of an impact place: A failure analysis. Eng. Fail. Anal. 77, 2017, 93-101.
• 3. Zeman D., Tengler J. and Švadlenka L. The correction of rfid identifiers scanning errors on dynamically moving logistic units. Proceedings of the 14th International Conference Reliability and Statistics in Transportation and Communication 2014, 80-89.
• 4. Fedorko G., Molnár V., Dovica M., Husáková N., Kráľ jr. J. and Ferdynus M. The use of industrial metrotomography in the field of maintenance and reliability of rubber-textile conveyor belts in closed continuous transport systems., Eksploat. I Niezawodn. – Maint. Reliab. 18, 2016, 539–543.
• 5. Kampf R., Průša P. and Savage C. Systematic location of the public logistic centers in Czech Republic. Transport 26(4), 2011, 425–432.
• 6. Jachowicz T., Sikora J. W. and Dulebova L.: Investigating effects of prodegradant content on selected properties of polymer composite materials. Environmental Engineering and Management Journal 12 (16), 2017, 2879-2886.
• 7. http://www.hallelujahbelt.com/airport-logistics/
• 8. Rudawska, A. and Debski H. Experimental and numerical analysis of adhesively bonded aluminium alloy sheets joints. Eksploat. I Niezawodn. – Maint. Reliab. 1, 2011, 4-10.
• 9. Gaudenzi B. and Borghesi A. Managing risks in the supply chain using the AHP method. The Inter-national Journal of Logistics Management 17(1), 2006, 114-136.
• 10. Saaty T.L. Decision Making for Leaders, Lifetime Learning publications. USA, 1982.
• 11. Warfield J.N. Societal Systems, New York, John Wiley, 1976.
• 12. Saaty T.L. Axiomatic foundation of the Analytic Hierarchy Process, Management Science 32(7), 1986, 841-855.
• 13. Alphonce C.B. Application of the Analytic Hierarchy Process in agriculture in developing countries. Agricultural Systems 53(1), 1997, 97-112.
• 14. Harker P.T. and Vargas L.G. The theory of ratio scale estimation: Saaty‘s Analytic Hierarchy Process, Management Science 33(11), 1987, 1383-1403.
• 15. Saaty, T.L. The Analytic Hierarchy Process, McGraw-Hill, New York, 1980.
• 16. Molnár V., Fedorko G., Stehlíková B., Tomašková M. and Hulínová Z. Analysis of asymmetrical ef-fect of tension forces in conveyor belt on the idler roll contact forces in the idler housing. Meas. J. Int. Meas. Confed. 52, 2014, 22-32.
• 17. Stopka O. and Kampf R. Determining the most suitable layout of space for the loading units’ handling in the maritime port. Transport 33(1), 2016, 280-290.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).