Modelling of the coordinate measuring systems accuracy

• Autorzy: Sladek J. , Gaska A.
• Języki publikacji: EN

Abstrakty

EN

Coordinate metrology determines nowadays the relevant directions of development in automated measuring systems and quality management in the field of machine industry. The essential problem of coordinate measuring technique application is the issue of accuracy assessment of performed measurements. This paper describes the development of coordinate systems modelling as a new field of assessing the accuracy of measurements carried out in a quasi-real time. The practical solutions of the so-called virtual machines and virtual measuring systems were described along with the results of their evaluation and validation methodology based on a comparison of obtained results with the results produced by the typical methods of coordinate measurements accuracy assessment.

Słowa kluczowe

EN

coordinate measuring systems; modelling; uncertainty; accuracy

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2016
• Tom: Vol. 16, No. 3
• Strony: 34--46
• Opis fizyczny: Bibliogr. 17 poz., rys.

Twórcy

autor

Sladek J.

• Cracow University of Technology, Laboratory of Coordinate Metrology, Cracow, Poland

autor

Gaska A.

• Cracow University of Technology, Laboratory of Coordinate Metrology, Cracow, Poland

Bibliografia

• [1] BEAMAN J., MORSE E., 2010, Experimental evaluation of software estimates of task specific measurement uncertainty for CMMs, Precision Engineering, 34/1, 28-33.
• [2] GĄSKA A., 2011, Modeling of accuracy of coordinate measurement with use of Monte Carlo Method, Ph.D. Dissertation, Cracow University of Technology, Cracow.
• [3] GĄSKA A., SZEWCZYK D., GĄSKA P., GRUZA M., SŁADEK J., 2014, Usage of I++ Simulator to program Coordinate Measuring Machines when common programming methods are difficult to apply, Measurement Science Review, 14/1, 1-7.
• [4] OSTROWSKA K., GĄSKA A., SŁADEK J., 2014, Determining the uncertainty of measurement with the use of a Virtual Coordinate Measuring Arm, International Journal of Advanced Manufacturing Technology, 71, 529-37.
• [5] PHILLIPS S.D., BORCHARDT B., ABACKERLI A.J., SHAKARJI C., SAWYER D., 2003, The validation of CMM task specific measurement uncertainty software, Proc. of the ASPE 2003 summer topical meeting “Coordinate Measuring Machines”, Charlotte, 25 -26 June 2003.
• [6] RAMU P., YAGUE J.A., HOCKEN R.J., MILLER J., 2011, Development of a parametric model and virtual machine to estimate task specific measurement uncertainty for a five-axis multi-sensor coordinate measuring machine, Precision Engineering, 35/3, 431-439.
• [7] SŁADEK J., 2016, Coordinate metrology - accuracy of systems and measurements, Springer Verlag GmbH.
• [8] SŁADEK J., GĄSKA A., 2012, Evaluation of coordinate measurement uncertainty with use of virtual machine model based on Monte Carlo method, Measurement, 45, 1564-1575.
• [9] SŁADEK J., GĄSKA A., OLSZEWSKA M., KUPIEC R., 2012, Models of virtual coordinate measuring machines based on the conception of Matrix Method, chapter in: Accuracy in Coordinate Metrology, University of Bielsko-Biala, Bielsko-Biala, 9-25.
• [10] SŁADEK J., GĄSKA A., OLSZEWSKA M., KUPIEC R., KRAWCZYK M., 2013, Virtual coordinate measuring machine built using Laser Tracer system and spherical standard, Metrology and Measurement Systems, 20/1, 77-86.
• [11] TRAPET E., FRANKE M., HARTIG F., SCHWENKE H., WALDELE F., COX M., FORBES A., DELBRESSINE F., SCHNELLKENS P., TRENK M., MEYER H., MORLTZ G., GUTH Th., WANNER N., 1999, Traceability of coordinate measuring machines according to the method of the Virtual Measuring Machines, PTB F-35, Braunschweig.
• [12] TRENK M., FRANKE M., SCHWENKE H., 2004, The “Virtual CMM”, a software tool for uncertainty evaluation - practical application in an accredited calibration lab, Proc. of ASPE: Uncertainty Analysis in Measurement and Design, July 2004.
• [13] WILHELM R.G., HOCKEN R., SCHWENKE H., 2001, Task specific uncertainty in coordinate measurement, CIRP Annals – Manufacturing Technology, 50/2, 553-563.
• [14] VDI/VDE 2617-7, Accuracy of coordinate measuring machines. Parameters and their checking. Estimation of measurement uncertainty of coordinate measuring machines by means of simulation.
• [15] JĘDRZEJEWSKI J., KWAŚNY W., KOWAL Z., WINIARSKI Z., 2014, Development of the modelling and numerical simulation of the thermal properties of machine tools, Journal of Machine Engineering, 14/3, 5-20.
• [16] JEMIELNIAK K., WYPYSIŃSKI R., 2013, Review of potential advantages and pitfalls of numerical simulation of self-excited vibrations, Journal of Machine Engineering, 13/3, 77-90.
• [17] RUSINEK R., 2010, Chatter in milling of composites: simulations and diagnostic, Journal of Machine Engineering, 10/3, 30-36.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.