Research on structure and directional distribution of vibration generated by engine in the location where vibrations penetrate the human organism

• Autorzy: Burdzik R.

Warianty tytułu

PL

Badania struktury i rozkładu kierunkowego drgań pochodzących od silnika w miejscach wnikania do ciała kierowcy

• Języki publikacji: EN

Abstrakty

EN

The paper presents the results of investigation on directional distribution of vibration generated by engine. The vibration are strongly correlated to comfort and safety of driving. The results of the research enable analyzing the vibration propagation from engine to human body. The structures and directional distribution of the vibrations have been registered in the location where vibrations penetrate the human organism.

PL

W artykule przedstawiono wyniki badań kierunkowego rozkładu drgań generowanych przez silnik pojazdu na postoju. Komfort i bezpieczeństwo jazdy są ściśle powiązane z drganiami pojazdu. Uzyskane wyniki badań umożliwiają precyzyjną analizę propagacji drgań od silnika do organizmu człowieka. Drgania rejestrowano w 3 osiach w miejscach konstrukcyjnych, w których drgania przenoszone są na ciało człowieka.

Słowa kluczowe

EN

vibration propagation; vibration structure; car vehicle

PL

propagacja drgań; struktura drgań; pojazd samochodowy

• Wydawca: Polskie Towarzystwo Diagnostyki Technicznej
• Czasopismo: Diagnostyka
• Rocznik: 2013
• Tom: Vol. 14, No. 2
• Strony: 57--61
• Opis fizyczny: Bibliogr. 21 poz., rys., wykr.

Twórcy

autor

Burdzik R.

• The Silesian University of Technology, Faculty of Transport, Krasińskiego 8, 40-019 Katowice, Poland fax./tel. [phone]

Bibliografia

• [1] Burdzik R. Material vibration propagation in floor pan. Archives of Materials Science and Engineering, AMSE vol. 59/1 January 2013, s, 22-27.
• [2] Burdzik R., Doleček R.. Research of vibration distribution in vehicle constructive. Perner’s Contacts vol. VII no. 4, 2012, pp. 16-25.
• [3] Burdzik R., Stanik Z., Warczek J. Method of assessing the impact of material properties on the propagation of vibrations excited with a single force impulse. Archives of Materials and Metallurgy 57(2), 2012, pp. 409-416.
• [4] Burdzik R. Monitoring system of vibration propagation in vehicles and method of analysing vibration modes. J. Mikulski (Ed.): TST 2012, CCIS 329, Springer, Heidelberg, 2012, s. 406-413.
• [5] Jasinski M., Radkowski S. Use of the higher spectra in the low-amplitude fatigue testing. Mechanical Systems And Signal Processing 25(2) (2011) 704-716.
• [6] Figlus T., Wilk A. Comparison of the sound pressure measurement and the speed measurement of the gearbox vibrating surface. Journal of Transport Problems vol. 7 issue 1, 2012, pp. 37-42.
• [7] Tuma J. Gearbox noise and vibration prediction and control. International Journal of Acoustics and Vibration vol. 14 issue 2 (2009) 99-108.
• [8] Pojawa B. The energetic diagnostics of naval propulsion system with naval gas turbine. Diagnostyka 2(50), 2009, pp. 55-58.
• [9] Michalski R., Wierzbicki S. An analysis of degradation of vehicles in operation. Maintenance and Reliability 1(37), 2008, pp. 30-32.
• [10] Cempel C., Tabaszewski M. Multidimensional vibration condition monitoring of nonstationary systems in operation. Mechanical Systems and Signal Processing 21 (3), 2007, pp. 1233-1241.
• [11] Cempel C. Singular values of symptom observation matrix of a system in operation as indicators of system damage. Diagnostyka 4(60), 2011, pp. 27-38.
• [12] Urbanek J., Barszcz T, Uhl T. Comparison of advanced signal-processing methods for roller bearing faults detection. Metrology and Measurement Systems, 19(4), 2012, 715-726.
• [13] Uhl T., The use and challenge of modal analysis in diagnostics. Diagnostyka vol. 30 i. 2, 2004, pp. 151-160.
• [14] Raghavan A., CES. Cesnik. Review of guided - waves structural health monitoring, The Shock and Vibration Digest 39, 2007, pp. 91-114.
• [15] Blacha L., Siwiec G., Oleksiak B. Loss of aluminium during the process of Ti-Al-V alloy smelting in a vacuum induction melting (VIM) furnace. Metalurgija 52 (3), 2013, p. 301-304.
• [16] Folęga P., Siwiec G. Numerical analysis of selected materials for flexsplines. Archives of Metallurgy and Materials 57 (1), 2012, p. 185-191.
• [17] Mencik J. Determination of parameters of visco-elastic materials by instrumented indentation. Part 3: rheological model and other characteristics, Chem. Listy 104, 2010, pp. 275-278.
• [18] Wyllie I.H., Griffin M.J. Discomfort from sinusoidal oscillation in the pitch and fore-andaft axes at frequencies between 0.2 and 1.6Hz. Journal of Sound and Vibration 324, 2009.
• [19] Beards C.F. Structural Vibration: Analysis and Damping. Halsted Press, New York 1996.
• [20] Niziński S., Wierzbicki S., Ligier K., Model matematyczny procesu eksploatacji pojazdów mechanicznych. WITPIS, Sulejówek, 2002.
• [21] Wierzbicki S., Evaluation of on-board diagnostic systems in contemporary vehicles. Diagnostyka 2 (4)/2011, p.35-40.