PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Rheological behavior of polymer-based drilling fluids: experimental study of temperature effects

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Drilling fluids most commonly used are generally based on polymers. Polymers such as methylcellulose carboxylate (CMC), polyanionic cellulose (PAC) and xanthan (Xn) have a very important role in the success of drilling operations. Indeed, they are also used to improve certain properties, in particular rheological. However, these polymers can lose their characteristics under the influence of increasing temperature at the bottom of oil wells, thus affecting the ability of the mud to perform its useful role in the drilling operation, namely to raise the cuttings from the bottom of the well to the surface. The present work aims to study the effect of temperature on the main rheological properties (shear stress and plastic viscosity) as well as on the rheological behavior of water-based drilling muds (WBM). WBM_CMC and WBM_PAC (at Xn content fixed) were selected to evaluate the temperature effect (20°C; 40°C; 60°C and 80°C) on the rheological parameters and the rheological behavior. The results revealed that the shear stress and the plastic viscosity of the studied muds were considerably affected by an increase in temperature. A significant decrease in these drilling mud parameters as a function of temperature up to 80°C. A reduction of 58.8% in shear stress and 78.5% in plastic viscosity was observed. The results show that regardless of the test temperature, the shear thinning behavior of the WBM_CMC and WBM_PAC drilling muds is the same as the Herschel-Bulkley model.
Rocznik
Strony
95--104
Opis fizyczny
Bibliogr. 26 poz., fot., rys., tab., wykr.
Twórcy
autor
  • Research Unit: Materials, Processes and Environment, Faculty of Technology M'hamed Bougara University of Boumerdes, Frantz Fanon City - 35000 Boumerdes, ALGERIA
  • Research Unit: Materials, Processes and Environment, Faculty of Technology M'hamed Bougara University of Boumerdes, Frantz Fanon City - 35000 Boumerdes, ALGERIA
  • Research and Development Center / SONATRACH/ Drilling Division Av. 1st November, 35000 Boumerdes, ALGERIA
Bibliografia
  • [1] Ahuja D. and Tatsutani M. (2009): Sustainable energy for developing countries.– Surveys and Perspectives Integrating Environment and Society, vol.2, No.1, pp.1-16.
  • [2] Christine W.N. and Sammy C.L. (2018): Energy poverty and its implication on standard of living in Kirinyaga.- Kenya.– Journal of Energy, vol.2018.
  • [3] Manual B. (1969): Principles of Drilling Fluid Control.– Petroleum Extension Service, The University of Texas at Austin, Austin, TX, p.201.
  • [4] Caenn R. and Chillingar G.V. (1996): Drilling fluids: state of the art.– J. Pet. Sci. Eng., vol.14, pp.221-230.
  • [5] Garcia C. and Parigo P. (1968): Drilling fluids.– French Petroleum Institute (I.F.P), Technip. Ed. Paris.
  • [6] BabaHamed S. and Belhadri M. (2009): Rheological properties of biopolymers drilling fluids.– J Pet Sci Eng., vol.67, pp.84-90.
  • [7] Alderman N.J., Ram Babu D., Hughes T.L. and Maitland G.C. (1988): The rheological properties of water-based drilling fluids.– In Proceedings of the Xth International Congress on Rheology, Sydney, vol.1, pp.140-142.
  • [8] Safi B., Zarouri S., Chabane-Chaouache R., Saidi M. and Benmounah A. (2016): Physico-chemical and rheological characterization of water-based mud in the presence of polymers.– J. Petrol Explor. Prod. Technol., vol. 6, pp.185-190.
  • [9] Caenn R., Darley H.C. and Gray G.R. (2011): Composition and properties of drilling and completion fluids.– Gulf Professional Publishing.
  • [10] Amanullah M.D. and Long Y. (2004): Superior corn-based starches for oil field application, in new director for a diverse planet.– In: Proceedings for the 4th International Conference on Corns, Brisbane, Australia.
  • [11] Ching C., Kaplan D., and Thomas E. (1993): Biodegradable Polymers and Packaging.– Technomic. Lancaster, Penn.
  • [12] Durand C., Forsans T., Ruffet C., Onaisi A. and Audibert A (1995): Influence of clays on borehole stability: a literature survey.– Rev Inst Fr Pétr, vol.50, No.2, pp.187-218.
  • [13] Beg M., Kumar P., Choudhary P., and Sharma S. (2020): Effect of high temperature ageing on TiO2 nanoparticles enhanced drilling fluids: A rheological and filtration study.– Upstream Oil and Gas Technology, vol.5, 100019.
  • [14] Ahmed A., Sharifi Haddad A., Rafati R., Bashir A., AlSabagh A.M. and Aboulrous A.A. (2021): Developing a thermally stable ester-based drilling fluid for offshore drilling operations by using aluminum oxide nanorods.– Sustainability, vol.13, No.6, pp.3399.
  • [15] Beg M., Kesarwani H. and Sharma S. (2019, November): Effect of CuO and ZnO nanoparticles on efficacy of poly 4-styrenesulfonic acid-co-maleic acid sodium salt for controlling HPHT filtration.– In Abu Dhabi International Petroleum Exhibition & Conference, OnePetro.
  • [16] Kumara M.S., Khan A.B., Rohit C.K. and Purushotham B., (2012): Effect of carbon and nitrogen sources on the production of xanthan gum from Xanthomonas campestris isolated from the soil.– Archives of Applied Science Research, vol.4, No.6, pp.2507-2512.
  • [17] Sutherland I.W. (2001): Microbial polysaccharides from gram-negative bacteria.– International Dairy Journal, vol.11, No.9, pp.663-674.
  • [18] Haider S., Messaoud-Boureghda M. Z., Aknouche H., Akkouche A., Hammadi L. and Safi B. (2019): An ecological water-based drilling mud (WBM) with low cost: substitution of polymers by wood wastes.– Journal of Petroleum Exploration and Production Technology, vol. 9, No.1, pp.307-313.
  • [19] Su X., Lian Z. and Yuan Y. (2019): Study on the effect of the oil-water ratio on the rheological properties of hydroxyethyl cellulose (HEC).– Geofluids.
  • [20] Mahto V. and Sharma V. (2004): Rheological study of a water based oil well drilling fluid.– J. Pet. Sci. Eng., vol.45, No.1, pp.123-128.
  • [21] Mahto V. (2007): Development of water-based drilling fluids using tamarind gum and partially hydrolyzed polyacrylamide.– Proceeding of MPT-2007, International Seminar on Mineral, Processing Technology, February, pp.22-24.
  • [22] Aladag B., Halelfadl S., Donera N., Mare T., Duret S. and Estelle´ P. (2012): Experimental investigations of the viscosity of nanofluids at low temperatures.– Appl. Energ., vol.97, pp.876-880.
  • [23] Briscoe B.J., Luckham P.F. and Ren S.R. (1994): The properties of drilling muds at high pressures and high temperatures.– Philosophical Transactions of the Royal Society of London. Series A: Physical and Engineering Sciences, vol.348(1687), pp.179-207.
  • [24] Mohammed A.S. (2017). Effect of temperature on the rheological properties with shear stress limit of iron oxide nanoparticle modified bentonite drilling muds.– Egyptian Journal of Petroleum, vol.26, No.3, pp.791-802.
  • [25] Cayeux E. (2020): Time, pressure and temperature dependent rheological properties of drilling fluids and their automatic measurements.– In IADC/SPE International Drilling Conference and Exhibition. OnePetro.
  • [26] Cayeux E. and Leulseged A. (2019): Effect of solid particle concentration on drilling fluid rheological behavior and its impact on pressure losses.– In SPE/IADC International Drilling Conference and Exhibition. OnePetro.
Uwagi
PL
Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024)
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-48ad7085-247d-48c6-a0d1-6962c5fe4701
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.