Effect of bond conditions on local bond-slip relationships of ribbed bars in high performance self-compacting concrete

• Autorzy: Dybel Piotr

Identyfikatory

DOI

10.1016/j.acme.2019.09.003

• Języki publikacji: EN

Abstrakty

EN

The bond of concrete to steel reinforcing bars is the basis for the concept of reinforced concrete as a construction material. One of important bond-related issues is the bond strength-bar slip relation, which has an influence on the failure mode and rotation of structural joints. This relation can be predicted by bond–slip models and it depends on the bond behaviour at the reinforcement–concrete interface. However, the currently-known bond-slip models offer limited applications to well-studied normal concretes only. This article proposes local bond–slip relationships for high performance self-compacting con-crete (HPSCC) taking into account the quality of bond conditions. The studies were per-formed on specimens made of four different high performance self-compacting concrete mixes with varying contents of silica fume. Since the specimens had total heights of 480, 800 and 1600 mm, it was possible to measure the changes of the bond at individual levels. The results were next compared to those obtained for samples made of vibrationally-compacted high-performance concrete (HPC). It was demonstrated that the bond-slip model for normal concretes seems to underestimate the bond stiffness and ultimate bond strength for the HPSCC and HPC mixtures. Moreover, it was proven that a change of the quality of bond conditions has an effect on the local bond-slip relationship. Finally, local bond-slip relation-ships were presented separately for HPSCC and HPC with respect to the quality of bond conditions

Słowa kluczowe

EN

concrete technology; high performance self-compacting; concrete; bond-slip; bond conditions; pull-out test

PL

technologia betonu; beton; zagęszczanie; wiązanie

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2019
• Tom: Vol. 19, no. 4
• Strony: 1399--1408
• Opis fizyczny: Bibliogr. 33 poz., rys., wykr.

Twórcy

autor

Dybel Piotr

• AGH University of Science and Technology, Department of Geomechanics, Civil Engineering and Geotechnics, Al. Mickiewicza 30, 30-059 Kraków, Poland

Bibliografia

• [1] H.T. Le, M. Müller, K. Siewert, H.-M. Ludwig, The mix design for self-compacting high performance concrete containing various mineral admixtures, Mater. Des. (2015), http://dx.doi. org/10.1016/j.matdes.2015.01.006.
• [2] M. Gesoǧlu, E. Güneyisi, E. Özbay, Properties of self-compacting concretes made with binary, ternary, and quaternary cementitious blends of fly ash, blast furnaceslag, and silica fume, Constr. Build. Mater. (2009), http://dx. doi.org/10.1016/j.conbuildmat.2008.09.015.
• [3] J.J. Luke, B.S. Hamad, J.O. Jirsa, The Influence of Casting Position on Development and Splice Length of Reinforcing Bars, Research Report No. 242-1, Austin, 1981.
• [4] P. Dybel, K. Furtak, The effect of ribbed reinforcing bars location on their bond with high-performance concrete, Arch. Civ. Mech. Eng. 15 (2015) 1070–1077. , http://dx.doi.org/ 10.1016/j.acme.2015.03.008.
• [5] P.R. Jeanty, D. Mitchell, M.S. Mirza, Investigation of ‘‘Top Bar’’ effects in beams, ACI Struct. J. (1988), http://dx.doi.org/ 10.14359/2613.
• [6] H. Martin, On the interrelation among surface roughness, bond and bar stiffness in the reinforcement subject to short-term loading (in German), Deutscher Ausschuss Stahlbeton (1973).
• [7] S.M. Mirza, J. Houde, Study of bond stress-slip relationships in reinforced concrete, ACI J. Proc. 76 (1976) 19–46.
• [8] V. Ciampi, R. Eligehausen, V.V. Bertero, E.P. Popov, Analytical model tor deformed bar bond under generalized excitations, Proc. IABSE Colloq. an Adv. Mech. Reinf. Concr. (1981) 53–67.
• [9] H.G. Kwak, S.P. Kim, Bond-slip behavior under monotonic uniaxial loads, Eng. Struct. 23 (2001) 298–309. , http://dx.doi. org/10.1016/S0141-0296(00)00008-0.
• [10] M.H. Harajli, Numerical bond analysis using experimentally derived local bond laws: a powerful method for evaluating the bond strength of steel bars, J. Struct. Eng. (2007), http://dx. doi.org/10.1061/(ASCE)0733-9445(2007)133:5(695).
• [11] H. Sezen, E.J. Setzler, Reinforcement slip in reinforced concrete columns, ACI Struct. J. (2008), http://dx.doi.org/ 10.14359/19787.
• [12] R. Eligehausen, E.P. Popov, V.V. Bertero, Local bond stress-slip relationships of deformed bars under generalized excitations, in: Proc. 7th Eur. Conf. Earthq. Eng., 1982, doi:Report No. UCB/ EERC-83/23.
• [13] FIB Bulletin No. 65. Model Code 2010. Final draft Volume 1, 2012.
• [14] C.O. Orangun, J.O. Jirsa, J.E. Breen, A reevaluation of test data on development length and splices, J. Am. Concr. Inst. (1977), http://dx.doi.org/10.14359/10993.
• [15] R.A. Chapman, S. Shah, Early-age bond strength in reinforced concrete, ACI Mater. J. 84 (1987) 501–510.
• [16] M.H. Harajli, Development/splice strength of reinforcing bars embedded in plain and fiber reinforced concrete, ACI Struct. J. 91 (1994) 511–520.
• [17] P.G. Gambarova, G.P. Rosati, B. Zasso, Steel-concrete bond after concrete splitting: test results, Mater. Struct. 22 (1989) 35–47.
• [18] P.G. Gambarova, G.P. Rosati, Bond and splitting in reinforced concrete: test results on bar pull-out, Mater. Struct. 29 (1996) 267–276.
• [19] F. Aslani, S. Nejadi, Bond behavior of reinforcement in conventional and self-compacting concrete, Adv. Struct. Eng. (2012), http://dx.doi.org/10.1260/1369-4332.15.12.2033.
• [20] F.M. de Almeida Filho, M.K. El Debs, A.L.H.C. El Debs, Bond-slip behavior of self-compacting concrete and vibrated concrete using pull-out and beam tests, Mater. Struct. 41 (2008) 1073– 1089. , http://dx.doi.org/10.1617/s11527-007-9307-0.
• [21] A.A.A. Hassan, K.M.A. Hossain, M. Lachemi, Bond strength of deformed bars in large reinforced concrete members cast with industrial self-consolidating concrete mixture, Constr. Build. Mater. 24 (2010) 520–530. , http://dx.doi.org/10.1016/j. conbuildmat.2009.10.007.
• [22] K.G. Trezos, I.P. Sfikas, C.G. Pasios, Influence of water-to-binder ratio on top-bar effect and on bond variation across length in Self-Compacting Concrete specimens, Cem. Concr. Compos. (2014), http://dx.doi.org/10.1016/j.cemconcomp.2013.11.012.
• [23] G. König, K. Holschemacher, F. Dehn, D. Weiße, Bond of reinforcement in self-compacting concrete (SCC) under monotonic and cyclic loading, in: O. Wallevik, I. Nielsson (Eds.), Proc. Third Int. RILEM Symp. Self-Compacting Concr., 2003, 939–947.
• [24] A. Schiessl, K. Zilch, The effects of the modified composition of SCC on shear and bond behaviour, in: K. Ozawa, M. Ouchi (Eds.), Proc. Second Int. RILEM Symp. Self-Compacting Concr., Tokyo, 2001, 501–506.
• [25] G. Wang, J. Zheng, Bond behaviors of self-compacting concrete, in: Z. Yu, C. Shi, K.H. Khayat, Y. Xie (Eds.), Proc. First Int. Symp. Des. Perform. Use Selfconsolidating Concr., China, 2005 465–471.
• [26] Z. Huang, B. Engrtom, J. Magnusson, Experimental Investigation of the Bond and Anchorage Behaviour of Deformed Bars in High Strength Concrete, In: Report 94:4, Chalmers, 1996.
• [27] P. Desnerck, G. De Schutter, L. Taerwe, A local bond stress-slip model for reinforcing bars in self-compacting concrete, Proc. Fract. Mech. Concr. Concr. Struct. (2010) 771–778.
• [28] EN 10080, Steel for the Reinforcement of Concrete, 2007.
• [29] EN 12390-3, Testing hardened concrete. Compressive strength of test specimens, 2009.
• [30] The European Guidelines for Self Compacting Concrete: Specification, Production and Use, 2005.
• [31] RILEM TC, RILEM Recommendations for the Testing and Use of Construction Materials, RC 6 Bond Test for Reinforcement Steel. Pull-Out Test, 1983, E&FN SPON, 1994.
• [32] J.O. Jirsa, J.E. Breen, Influence of Casting Position and Shear on Development and Splice Length - Design Recommendation, Research Report No. 242-3F, Austin, 1981.
• [33] P. Dybel, K. Furtak, Effect of silica fume content on the bond stiffness of reinforcement bars in high-performance concrete, Cem. Wapno, Beton. 2 (2014) 106–113.

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020)