Mechanical properties of parts of medical components produced using additive manufacturing technologies

• Autorzy: Górski F. , Wichniarek R. , Kuczko W. , Burdzińska M. , Jankowska M.

Identyfikatory

DOI

10.12913/22998624/70997

• Języki publikacji: EN

Abstrakty

EN

The paper presents results of tests conducted on the elements of medical devices - slings used in medical lifts - manufactured using additive technologies. The project assumed to produce 100 samples of clips with varying design, material and orientation parameter. Samples were manufactured using FDM and SLA processes and then tested for mechanical strength, load transmission and functionality, using certified equipment. The paper shows full methodology and the obtained test results.

Słowa kluczowe

EN

additive manufacturing; slings; mechanical properties; medical devices

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2017
• Tom: Vol. 11, no 2
• Strony: 166--171
• Opis fizyczny: Bibliogr. 13 poz., fig., tab.

Twórcy

autor

Górski F.

• Poznan University of Technology, Chair of Production Engineering and Management, Poznan, Poland

autor

Wichniarek R.

• Poznan University of Technology, Chair of Production Engineering and Management, Poznan, Poland

autor

Kuczko W.

• Poznan University of Technology, Chair of Production Engineering and Management, Poznan, Poland

autor

Burdzińska M.

• ArjoHuntleigh Polska Sp. z o. o., ul. Ks Wawrzyniaka 2, 62-052 Komorniki

autor

Jankowska M.

• ArjoHuntleigh Polska Sp. z o. o., ul. Ks Wawrzyniaka 2, 62-052 Komorniki

Bibliografia

• 1. Bellini A. and Guceri S. Mechanical characterization of parts fabricated using Fused Deposition Modeling. Rapid Prototyping Journal, 9, 2003, 252 – 264.
• 2. Chua C. K., et al. Rapid Prototyping: Principles and Applications. World Scientific Publishing, 2010.
• 3. Gajdoš I., et al. Structure and tensile properties evaluation of samples produced by Fused Deposition Modeling. Open Engineering, 1(6), 2016, 86-89.
• 4. Górski F., et al. Computation of Mechanical Properties of Parts Manufactured by Fused Deposition Modeling using Finite Element Method. 10th International Conference on Soft Computing Models in Industrial and Environmental Applications, Advances in Intelligent Systems and Computing, 368, 2015, 403-413.
• 5. Górski F., et al. Strength of ABS parts produced by fused deposition Modeling technology - a critical orientation problem. Advances in Science and Technology Research Journal, 9, 2015, 12-19.
• 6. Kim H., Jeong S. Case study: Hybrid model for the customized wrist orthosis using 3D printing. Journal of Mechanical Science and Technology, 29(12), 2015, 5151-5156.
• 7. Marro A., et al. Three-Dimensional Printing and Medical Imaging: A Review of the Methods and Applications. Current Problems in Diagnostic Radiology, 45, 2016, 2-9.
• 8. Rankin T.M., et al. Three-dimensional printing surgical instruments: are we there yet?. Journal of Surgical Research, 189(2), 2014, 193-197.
• 9. Salmi M., et al. Rapid Tooling Method for Soft Customized Removable Oral Appliances. The Open Dentistry Journal, 6, 2012, 85-89.
• 10. Syam W. P., et al. Rapid prototyping and rapid manufacturing in medicine and dentistry. Virtual and Physical Prototyping, 6(2), 2011, 79-109.
• 11. Tukuru N., et al. Rapid prototype technique in medical field. International Journal of PharmTech Research, 1(4), 2008, 341–344.
• 12. Website: ArjoHuntleigh Product, Patient Transfer Solutions Brochure; http://www.arjohuntleigh. com/ (access: 15.03.2017).
• 13. Website: ArjoHuntleigh Test Methods for Verification or Validation. Verification of Clip for batch release, HMX492. Document number 100007316; http:// www.arjohuntleigh.com/ (access: 15.03.2017).

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)