PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
Tytuł artykułu

Metoda tomografii ultradźwiękowej – próba nieniszczącej lokalizacji zbrojenia w elemencie betonowym

Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
EN
Ultrasonic tomography method – non-destructive testing of location reinforcement in the concrete element
Konferencja
42. Krajowa Konferencja Badań Nieniszczących, Kołobrzeg, 15-17 października 2013 r.
Języki publikacji
PL
Abstrakty
PL
W artykule przedstawiono próbę nieniszczącej lokalizacji zbrojenia w elemencie betonowym z zastosowaniem nowoczesnej nieniszczącej metody badawczej tomografii ultradźwiękowej. Metoda ta nie jest przeznaczona do lokalizacji zbrojenia, ale podczas testów laboratoryjnych otrzymano interesujące wyniki, które zamieszczono w niniejszej pracy. Były to sygnały, jakie otrzymano dla próbki betonowej wykonanej w laboratorium, w której umieszczono zamodelowaną siatkę prętów zbrojeniowych. Analiza uzyskanych rezultatów wykazała, że jest możliwe określenie lokalizacji siatki zbrojeniowej za pomocą metody tomografii ultradźwiękowej, ale do głębokości ok. 200 mm elementu betonowego. Zwrócono uwagę, że potrzeba większej liczby takich sygnałów (zobrazowań) wzorcowych, które mogą być przydatne do monitoringu i diagnostyki obiektów wykonanych z betonu.
EN
The paper presents the location of the non-destructive test of reinforcement in concrete element with the use of modern non-destructive testing method of ultrasonic tomography. This method is indeed dedicated to the location of the reinforcement, but during laboratory tests gave interesting results, which are presented in this paper. There were signals that were obtained for the samples of concrete performed in the laboratory, which provided a grid of reinforcing bars modeled. Analysis of the results showed that it is possible to determine the location of the reinforcing fabric by the method of ultrasonic tomography, but to a depth of about 200 mm of the concrete element. It was noted that there is a need to develop more of these signals (imaging) model, which can be useful for monitoring and diagnosis of buildings made of concrete.
Rocznik
Strony
139--141
Opis fizyczny
Bibliogr. 7 poz., il.
Twórcy
  • Politechnika Wrocławska
Bibliografia
  • [1] Bishko A. V., Samokrutov A. A, Shevaldykin V. G.: Ultrasonic echo-pulse tomography of concrete using shear waves low-frequency phased antenna arrays. e-Journal of Non-destructive Testing & Ultrasonics, vol. 13, 2008.
  • [2] Hoła J., Schabowicz K., State-of-the-art nondestructive methods for diagnostics testing of building structures - anticipated development trends, Archives of Civil and Mechanical Engineering, 11, 2010.
  • [3] Kozlov V. N., Samokrutov A. A., Shevaldykin V. G.: Thickness Measurements and Flaw Detection in Concrete Using Utrasonic Echo Method. J. Nondestructive Testing and Evaluation, 1997, vol. 13,3.73-84.
  • [4] Samokrutov A. A., Kozlov V. N., Shevaldykin V. G,. Ultrasonic testing of concrete objects using dry acoustic contact. Methods, Instruments and possibilities. The 5th International Conference „Non-Destructive Testing and Technical Diagnostics in Industry”. Mashinostroenie, 2006, s.152.
  • [5] Schabowicz K., Hoła J.: Nondestructive elastic-wave tests of foundation slab in office building, 13th Asia-Pacific Conference on Non-Destructive Testing, Yokohama, Japan, 2009.
  • [6] Schabowicz K., Hoła J., Styś D.: Nondestructive elastic-wave tests of concrete in foundation slab, 10th European Conference on Nondestructive Testing, Moscow, Russia, 2010.
  • [7| Schabowicz K., Hoła J., Nondestructive elastic-wave tests of foundation slab in office building, Materials Transactions, 53, 2012, s. 296-302.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-286c3343-c581-4c1c-84cc-977e13ca4102
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.