Draft JIG structure design for measuring deformation of thin-walled robotic or conveyor components

• Autorzy: Michalik Peter , Zajac Jozef , Straka Ľuboslav , Nowakowski Lukasz , Ambrozy Martin

Identyfikatory

DOI

10.12913/22998624/92340

• Języki publikacji: EN

Abstrakty

EN

The paper presents the general function, the division and the description of the main jig parts. It gives account of the basics and principles of a measuring jig structure using CAD applications. The main part delves into design of individual measurement jig options for measuring deformations of thin-walled robotic and conveyor components. Tension and stress analyses for each option have been performed. Subsequent to stress analysis, a suitable option was selected, with a description of its main parts, the production process and the necessary production equipment. Finally, the jig produced for the purpose of measuring deformation of thin-walled robotic and conveyor components is presented.

Słowa kluczowe

EN

thin-walled; robotic; conveyor

PL

cienkie ściany; robot; transporter

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2018
• Tom: Vol. 12, no 3
• Strony: 55--60
• Opis fizyczny: Bibliogr. 20 poz., fig.

Twórcy

autor

Michalik Peter

• Technical University of Kosice, Faculty of Manufacturing Technologies with seat in Presov, Bayerova 1, 08001, Slovakia

autor

Zajac Jozef

• Technical University of Kosice, Faculty of Manufacturing Technologies with seat in Presov, Bayerova 1, 08001, Slovakia

autor

Straka Ľuboslav

• Technical University of Kosice, Faculty of Manufacturing Technologies with seat in Presov, Bayerova 1, 08001, Slovakia

autor

Nowakowski Lukasz

• Kielce University of Technology, Katedra Technologii Mechanicznej i Metrologii, Kielce, Poland

autor

Ambrozy Martin

• Levoča, Francisciho 33, 082 71, Slovakia

Bibliografia

• 1. Liptai, P., et al.: Check measurements of magnetic flux density: Equipment design and the determination of the confidence interval for EFA 300 measuring devices, Meas. J. Int. Meas. Confed. 111 (2017) 51–59.
• 2. Dębski, H., et al.: Numerical and experimental analysis of the progressive gear body with the use of finite-element method Badania numeryczne i doświadczalne konstrukcji chwytacza progresywnego z wykorzystaniem metody elementów skończonych *, 17 (2015) 544–550.
• 3. Molnar, V., et al.: Influence of tension force asymmetry on distribution of contact forces among the conveyor belt and idler rolls in pipe conveyor during transport of particulate solids, Measurement. 63 (2015) 120–127.
• 4. Lehocka, D.: Comparison of the influence of acoustically enhanced pulsating water jet on selected surface integrity characteristics of CW004A copper and CW614N brass, Measurement. 110 (2017) 230–238.
• 5. Honus, S., et al.: The effect of the number of conveyor belt carrying idlers on the failure of an impact place: A failure analysis, A Fail. Anal. (2017).
• 6. Mantic, M.:, et al.: Influence of selected digitization methods on final accuracy of 3D model, (2016) 475–480.
• 7. Kral, J.,et al.: Creation of 3D parametric surfaces in CAD systems., Acta Mech. Slovaca 2008. (n.d.) 223–228.
• 8. Tor-Świątek, A., et al.: Quantitative Assessment of the Microscopic Structure of Extruded and Injected Low-Density Polyethylene Modified with Microspheres by Image Analysis, Cell. Polym. 35 (2016) 67–84.
• 9. Fedorko, G., et al.: Failure analysis of irreversible changes in the construction of rubber- textile conveyor belt damaged by sharp-edge material impact, Eng. Fail. Anal. 39 (2014) 135– 148.
• 10. Fedorko, G., et al.: Failure analysis of irreversible changes in the construction of the damaged rubber hoses, Eng. Fail. Anal. 58 (2015) 31–43.
• 11. Molnár, V., et al.: Monitoring of dependences and ratios of normal contact forces on hexagonal idler housings of the pipe conveyor, Measurement. 64 (2015) 168–176.
• 12. Fedorko, G., et al.: Transportation of ore by belt conveyors with an application of conveyor impact plates, Metal. Int. 18 (2013) 226–228.
• 13. Baron, P., et al.: Research and application of methods of technical diagnostics for the verification of the design node, Measurement. 94 (2016) 245–253.
• 14. Aslani, F., et al.: Behaviour and design of hollow and concrete-filled spiral welded steel tube columns subjected to axial compression, J. Constr. Steel Res. 128 (2016) 261–288.
• 15. Fang, G.W.R. Gao, X.G. Zhang, Finite Element Simulation and Experiment Verification of Rolling Forming for the Truck Wheel Rim, Int. J. Precis. Eng. Manuf. 16 (2015) 1509–1515.
• 16. Jonsson, B., et al.: Weight optimization and fatigue design of a welded bogie beam structure in a construction equipment, Eng. Fail. Anal. 19 (2012) 63–76.
• 17. Troive, L., et al.: Springback compensation for a vehicle’s steel body panel, Int. J. Comput. Integr. Manuf. 31 (2017) 152–163.
• 18. Murčinková, Z., et al.: Research and analysis of stress distribution in multilayers of coated tools, Int. J. Mater. Res. 108 (2017) 495–506.
• 19. Futáš, P., et al.: The GIST of thermal stresses of cast iron castings, Manuf. Technol. 13 (2012) 173–179.
• 20. J. Strohmandl, Use of simulation to reduction of faulty products, UPB Sci. Bull. Ser. D Mech. Eng. 76 (2014) 223–230.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).