The changes of LD-PE films after exposure in different media

• Autorzy: Kojnoková Tatiana , Markovičová Lenka , Nový František

Identyfikatory

DOI

10.30657/pea.2020.26.32

• Języki publikacji: EN

Abstrakty

EN

This work deals with the study of polymers, and, in particular, polyethylene; its production, types, properties, and usage. The experimental part evaluates the changes of properties of the polyethylene film to be reused under various exposure conditions and selection of the most suitable medium for its application. The film made of low-density polyethylene (LD-PE) was influenced by aggressive media with different pH, specifically Savo for the disinfection, Savo as a Saponate for dish washing and Coca-Cola. On LD-PE films the water absorption and melting temperature evaluation tests were performed. Carried out tests show that the most aggressive medium for LD-PE film from used media is Coca-Cola. The most effective application of LD-PE film like wrapping on container transported is the Savo used as a Saponate for dish washing.

Słowa kluczowe

EN

polyethylene; recycling; LDPE film; water absorption; melting temperature

PL

polietylen; recykling; folia LDPE; absorpcja wody; temperatura topnienia

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2020
• Tom: Vol. 26, Iss. 4
• Strony: 185--189
• Opis fizyczny: Bibliogr. 17 poz., rys., tab.

Twórcy

autor

Kojnoková Tatiana

• University of Žilina, Department of Materials Engineering, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic

autor

Markovičová Lenka

• University of Žilina, Department of Materials Engineering, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic

autor

Nový František

• University of Žilina, Department of Materials Engineering, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic

Bibliografia

• 1.Benaissa, M., Benabdelhafid, A., 2010. A multi-product and multi-period facility location model for reverse logistics, Polish Journal of Management Studies 2, 13.
• 2.Bulatovic, V. O., Mandic, L., Turkovic, A., Grgic, D. K., Jozinovic, A., Zovko, R., Bajsic, E. G., 2019. Environmentally Friendly Packaging Materials Based on Thermoplastic Starch, Chemical and biochemical engineering quarterly, 33(2), 347-361, DOI: 10.15255/CABEQ.2018.1548
• 3.Fakirov, S., 2018. Nanofibrillar polymer-polymer and single polymer com posites via the "converting instead of adding" concept - Examples of true polymer nanocomposite, Advanced Industrial and Engineering Polymer Research, 1(1), 40-47, DOI 10.1016/j.aiepr.2018.02.001
• 4.Gaňa, D., Liptáková, T., Markovičová, L., 2019. Comparison of the properties of the original and applied ldpe foils in returned bottles, Production Engineering Archives, 25, 39-42, DOI: 10.30657/pea.2019.25.07
• 5.Habrman, M., Ráž, K., Kalina, T. 2019. Effect of the cascade injection molding on the filling behaviour. Manufacturing Technology, 19(6), 936-940. DOI: 10.21062/ujep/399.2019/a/1213-2489/MT/19/6/936
• 6.Hazlinger, M., Moravčík, R., Čaplovič, Ľ., 2010. Degradačné procesy a predikcia životnosti materiálov, Slovenská technická univerzita. Bratislava.
• 7.Katona, G., 2017. Petrochémia a výroba plastov, Slovnaft, 2017 https://moodle.uiam.sk/pluginfile.php/77184/mod_resource/content/1/04%20- %20Gejza%20Katona_petroch%C3%A9mia%20-%202017.pdf, Date accessed: 23.11.2018.
• 8.Liptáková, T., Alexy, P., Gondár, E., Khunová, V., 2012. Polymérne konštrukčné materiály, EDIS, Žilina.
• 9.Mleziva, J., Šnupárek, J., 2000. Polymery – výroba, struktura, vlastnosti a použití, Sobotáles, Praha.
• 10.Noorunnisa Khanam, P., Almaadeed, M.A., 2015. Processing and characterization of polyethylene-based composites, Advanced. Manufacturing: Polymer & Composites. Science, 1(2), 63-79. DOI: 10.1179/2055035915Y.0000000002
• 11.Ovsik, M., Hylova, L., Reznicek, M., Senkerik, V., Stanek, M. 2019. The influence of finishing operations on the surface quality of injected parts. Manufacturing Technology, 19(3), 477-481. DOI:10.21062/ujep/315.2019/a/1213-2489/MT/19/3/477
• 12.Pacana, A., Pacana, J. Sopel, J., 2016. Zatwarnicka-Madura, B. Assessment of packaging film quality by failure mode and effects analysis, Przemysł Chemiczny, 95(1), 142-144.
• 13.Raz, K., Zahalka, M., Chval, Z., Kucerova, L. 2017. Analysis of weld line influence on strength of nylon parts, Manufacturing Technology, 17(4), 561-565. DOI: 10.21062/ujep/x.2017/a/1213-2489/MT/17/4/561
• 14.Refillcase, 2018. https://refillcase.com/sk/Date Accessed: 7.02.2019.
• 15.Urban, W. 2019. TOC implementation in a medium-scale manufacturing system with diverse product rooting, Production and Manufacturing Research, 7(1), 178-194
• 16.Vasile, C., Pascu, M., 2005. Practical guide to polyethylene, RAPRA Technology, Shrewsbury.
• 17.Vašina, M., Pöschl, M., Zádrapa, P. 2018. A study of significant factors affecting viscoelastic damping properties of polymer materials, Manufacturing Technology, 18(3), 523-529, DOI: 10.21062/ujep/132.2018/a/1213-2489/MT/18/3/523

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).