PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Plastic Instabilities Induced by the Portevin - Le Châtelier Effect and Fracture Character of Deformed Mg-Li Alloys Investigated Using the Acoustic Emission Method

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The results of the investigation of both mechanical and acoustic emission (AE) behaviors of Mg4Li5Al and Mg4Li4Zn alloys subjected to compression and tensile tests at room temperature are compared with the test results obtained using the same alloys and loading scheme but at elevated temperatures. The main aim of the paper is to investigate, to determine and to explain the relation between plastic flow instabilities and the fracture characteristics. There are discussed the possible influence of the factors related with enhanced internal stresses such as: segregation of precipitates along grain boundaries, interaction of solute atoms with mobile dislocations (Cottrell atmospheres) as well as dislocation pile-ups which may lead to the microcracks formation due to the creation of very high stress concentration at grain boundaries. The results show that the plastic flow discontinuities are related to the Portevin-Le Châtelier phenomenon (PL effect) and they are correlated with the generation of characteristic AE pulse trains. The fractography of broken samples was analyzed on the basis of light (optical), TEM and SEM images.
Twórcy
autor
  • Institute of Metallurgy and Materials, Polish Academy of Sciences, 25 Reymonta Str., 30-059 Kraków, Poland
  • Institute of Metallurgy and Materials, Polish Academy of Sciences, 25 Reymonta Str., 30-059 Kraków, Poland
autor
  • Institute of Metallurgy and Materials, Polish Academy of Sciences, 25 Reymonta Str., 30-059 Kraków, Poland
autor
  • Institute of Metallurgy and Materials, Polish Academy of Sciences, 25 Reymonta Str., 30-059 Kraków, Poland
autor
  • Institute of Metallurgy and Materials, Polish Academy of Sciences, 25 Reymonta Str., 30-059 Kraków, Poland
  • Institute of Fundamental Technological Research, Polish Academy of Sciences, 5b Pawinskiego Str., 02-106 Warszawa, Poland
  • Institute of Fundamental Technological Research, Polish Academy of Sciences, 5b Pawinskiego Str., 02-106 Warszawa, Poland
autor
  • Institute of Engineering Materials and Biomaterials, Silesian University of Technology, 2a Akademicka Str., 44-100 Gliwice, Poland
autor
  • Institute of Materials and Machine Mechanics, 75 Raĉianska Str., 830-08 Bratislava, Slovak Republic
autor
  • Institute of Materials and Machine Mechanics, 75 Raĉianska Str., 830-08 Bratislava, Slovak Republic
Bibliografia
  • [1] S. Fujiwara, K. Abiko, Journal de Phys. IV, Coll. C7, C7-295 (1995).
  • [2] K. Misra, S. Prasad, Mat. Sci. 35, 3321(2000), DOI: 10.1007/ s10853-011-5728-9.
  • [3] M. Kanno, N. Shimodaira, Scripta Metall. 21, 1487 (1987).
  • [4] H. Yamagata, O. Izumi, J. Jap. Inst. Metals 42, 1012 (1978).
  • [5] S. Kudela, A. Pawełek, Z. Ranachowski, A. Piątkowski , S. Kudela Jr., P. Ranachowski, Kovove Mater. 49, 271 (2011), DOI: 10.4149/km 2011 4 271.
  • [6] A. Pawełek, Z. Jasieński, S. Kudela, A. Piątkowski, P. Ranachowski, F. Rejmund, F., Acoustic emission in channeldie compressed Mg-Li-Al alloys reinforced with short ceramic fibres and ibidem Influence of β phase on mechanical and acoustic behaviour of Mg-Li-Al alloys in: J. Jerz, P. Šebo, M. Zemankova (Ed.), Proceedings of the Int. Conf. on Advanced Metallic Materials, Smolenice, Slovakia, November 5-7, 2003, Slovak Acad. of Sciences (2003)
  • [7] J. Kuśnierz, A. Pawełek,, Z. Ranachowski, A. Piątkowski, Z. Jasieński, S. Kudela, S. Kúdela Jr., Rev. Adv. Mater. Sci. 18, 583 (2008).
  • [8] A. Pawełek, Mechanical behavior and plastic instabilities of compressed Al metals and alloys investigated with application of intensive strain and acoustic emission methods, in: Z. Ahmad (Ed.), Recent Trends in Processing and Degradation of Aluminium Alloys 2011, InTech (2011).
  • [9] A. Pawełek,, W. Ozgowicz, Z. Ranachowski, S. Kudela, A. Piątkowski, S. Kúdela Jr., P. Ranachowski, Mater. Tehnol. (2015), DOI: 10.1007/s10973-011-1375-2 (in press).
  • [10] A. Pawełek, A. Piątkowski, Z. Jasieński, S. Pilecki, Z. Metallkde. 92, 376 (2001).
  • [11] A. Pawełek, Z. Metallkde. 80, 614 (1989).
  • [12] Z. Jasieński, A. Pawełek, A. Piątkowski, Z. Ranachowski, Arch. Metall. Mater. 54, 29 (2009), DOI: 10.3139/146.110033.
  • [13] S. Kúdela Jr., H. Wendrock, S. Kúdela, A. Pawełek, A. Piątkowski i K. Wetzig, Int. J. of Mat. Res., 100, 910 (2009), DOI: 10.3139/146.110127
  • [14] S. Kúdela, Int. J. Mat. Prod. Techn. 18, 91(2003).
  • [15] S. Kamado, Y. Kojima, Met. Sci. Techn. 16, 45 (1998).
  • [16] M. E.Mehtedi, S. Spigarelli, E. Evangelista, G. Rosen, Int. J. of Mat. Res. 100, 447 (2009), DOI: 10.3139/146.110033.
  • [17] A. Pawełek,, A. Piątkowski, S. Kudela, Z. Jasieński, Arch. Metall. Mater. 51, 245 (2006), DOI: 10.3139/146.110033.
  • [18] M. Ohtsu, Sensor and Instrument, in: Ch. U. Grosse, M. Ohtsu (Ed.), Acoustic Emission Testing, 2008, Springer (2008), DOI: 10.1007/978-3-540-69972-9
  • [19] C. Wang, Z. Li, Y. Xu, E. Han, J. Mater. Sci. 42, 3573 (2007), DOI: 10.1007/s10853-011-5728-9.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-0de69124-2a0a-4c06-aacd-cdcabb17617a
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.