PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Impact of added chalcedonite powder on selected concrete properties

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Wpływ dodatku pyłu chalcedonitowego na wybrane właściwości betonu
Języki publikacji
EN PL
Abstrakty
EN
This article is about laboratory tests of concretes with 0%, 10%, 20% of the chalcedonite powder. Tested were the effect of the additions on compressive strength, absorbency and capillary strength of concrete. Compression strength was tested after 7, 14, 28, 56 and 90 days. The absorbability and capillary reinforcement of the concretes were tested after 28, 56 and 90 days. For concrete samples with 20% of the powder, the decrease in strength after 90 days of maturation is no more than 5% compared to the non-additive concrete series. In the absorbance test for the tested series with 20% of chalcedonite powder, a loss of weight gain of 11.3% was noted for the non-additive concrete after 90 days of maturation. The longer the concrete matures, the smaller the weight gain in the capillary action test. A similar tendency was noted for the amount of added additive. The more of the additive, the smaller the mass gain in absorbability and capillary action.
PL
Artykuł dotyczy badań laboratoryjnych betonów z dodatkiem 0%, 10%, 20% pyłu chalcedonitowego. Badano wpływ dodatku na wytrzymałość na ściskanie, nasiąkliwość i podciąganie kapilarne betonów. Wytrzymałość na ściskanie badano po upływie 7, 14, 28, 56 i 90 dniach. Nasiąkliwość i podciąganie kapilarne betonów zbadano po upływie 28, 56 i 90 dniach. Dla próbek betonowych z dodatkiem 20% pyłu spadek wytrzymałości po 90 dniach dojrzewania jest nie większy niż 5% w porównaniu do serii betonów bez dodatku. W badaniu nasiąkliwości dla badanej serii z 20% pyłu chalcedonitowego zanotowano spadek przyrostu masy o 11,3% w stosunku do betonu bez dodatku po 90 dniach dojrzewania. Im dłużej beton dojrzewa, tym mniejszy jest przyrost masy w badaniu podciągania kapilarnego. Podobną tendencję zauważono dla ilości wprowadzanego dodatku. Im więcej dodatku, tym mniejszy przyrost masy w nasiąkliwości i podciąganiu kapilarnym.
Rocznik
Strony
241--247
Opis fizyczny
Bibliogr. 10 poz., rys., tab., wykr.
Twórcy
autor
  • Kielce University of Technology
Bibliografia
  • [1] Śliwiński J., Basic properties of concrete and its durability, „Cement - Wapno - Beton” 2009, nr 5, pp. 245-254.
  • [2] Giergiczny Z., Mineral additives - indispensable components of modern cement and concrete, “Building Materials” 2009, nr 3, pp. 46-50.
  • [3] Giergiczny Z., Concrete additives in light of standard requirements, “Building Materials” 2007, nr 11, pp. 10-13.
  • [4] PN-88/B-06250 Ordinary concrete.
  • [5] Kurdowski W., Chemistry of cement and concrete, Association of Cement Manufacturers, Kraków 2010.
  • [6] PN-EN 12350-8:2012 Concrete Mix Testing - Part 8: Self-compacting Concrete - Conveying Tests.
  • [7] PN-EN 197-1:2012 Cement - Part 1: Composition, requirements and conformity criteria for common cements.
  • [8] PN-EN 206-1:2014 Concrete - Requirements, properties, manufacture and compatibility.
  • [9] Kotwa A., Influence of sub-zero temperature and initial set time on the properties of hardened concrete , “Structure and Environment” 2011, No. 3, pp. 11-17.
  • [10] Kotwa A., Spychał E., Effect of mineral additives on the properties of concrete, “Structure and Environment” 2016, No. 2, pp. 91-97.
Uwagi
PL
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-0811f09b-e703-4f56-acb5-4e14168fddca
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.