Wyniki wyszukiwania - Biblioteka Nauki

1

Performance and emissions characteristics of a diesel engine fueled by carbon nanoparticle-blended diesel and biodiesel

100%

Slavinskas S. , Jokubynienė V.

Transport Problems

|

2023

|

tom T. 18, z. 2

87--96

EN

Carbon-based nanomaterials have excellent properties and can be used in fuels to reduce emissions and improve engine performance and fuel economy. Due to their unique thermal conductivity properties, nanoparticles are widely used in various ways. The current article analyzes research results on the influence of carbon nanoparticles on the working characteristics and emissions of internal combustion engines powered by diesel and biodiesel. Fuels were mixed with the nanomaterial CPL at different concentrations (50, 100, and 150 ppm). This article analyzes the influence of nanomaterial (carbon wafers) in diesel engines using diesel and biodiesel to reduce emissions and fuel consumption, evaluates the volume of nanomaterials as a fuel additive needed to improve emission performance, and investigates the problem of the practical application of nano-fuel (i.e., regarding dosage and stability).

2

Effect of biodiesel on the development of split injection characteristics

80%

Slavinskas S. , Labeckas G. , Mickevičius T.

Combustion Engines

|

2019

|

tom R. 58, nr 2

103--107

EN

The paper presents the experimental test results of a common rail injection system operating with biodiesel and the diesel fuel. The three fuel split injection strategies were implemented to investigate the effects made by biodiesel and a fossil diesel fuel on the history of injector inlet pressure and the injection rate. In addition, the three intervals between split injections and the different injection pressures were used to obtain more information about the studied subjects. The obtained results showed that the peak mass injection rates of the main injection phase were slightly higher when using biodiesel than the respective values measured with the normal diesel fuel. Because the first injection phase activated the fuel pressure fluctuations along the high-pressure line and in front of the injector, the time-span between injections has an impact on the injector inlet pressure and thus the fuel injection rate during the second injection phase. Since the nozzle closes little later for biodiesel, the injector inlet pressure also occurred latter in the cycle.

3

Experimental investigation biodiesel-n-butanol fuels blends on performance and emissions in the diesel engine

80%

Labeckas G. , Slavinskas S. , Mickevičius T.

Combustion Engines

|

2022

|

tom R. 61, nr 1

90--95

EN

The paper presents the experimental test results reflecting the comparative changes in the performance efficiency and emissions of the exhaust of a naturally aspirated, four-stroke, single-cylinder, air-cooled diesel engine due to its transition from neat rapeseed oil biodiesel to fuel blends prepared by mixing in various proportion (by volume) rapeseed methyl ester (B) and butanol (Bu). The lubricity properties of biodiesel-n-butanol fuel blends were studied using HFRR method. In contrast to previous works, the undertaken investigation is performed with a totally renewable, binary liquid biofuel blends. The purpose of the research is to reduce simultaneously the production of NOx emissions and the exhaust smoke with respect to neat biodiesel due to potentially improved homogeneity of combustible mixture and particulate matter emissions benefits suggested by the higher oxygen content (21.62 wt%) and the relatively lower carbon-to-hydrogen ratio (4.8) of the normal n-butanol. The tests revealed that the brake specific fuel consumption for the binary biodiesel-n-butanol fuel blends is always higher than that neat biodiesel produces under the same loading conditions. Maximum nitrogen oxide (NOx) emissions were obtained with the engine running on neat biodiesel (2290 ppm). At full (100%) load conditions, the lowest NOx emission was obtained with the engine running on a biofuel BBu20 blend. The lowest level of carbon monoxide emissions (CO) was observed, when engine running with the most butanol-oxygenated biofuel blend BBu20.The highest smoke opacity of the exhaust was obtained when the engine was fuelled with neat biodiesel and at full load.

4

Tribological study of high-pressure fuel pump operating with ethanol-diesel fuel blends

80%

Labeckas G. , Slavinskas S. , Mickevicius T. , Kreivaitis R.

Combustion Engines

|

2019

|

tom R. 58, nr 2

132--135

EN

This paper presents comparative experimental study’s results of ethanol-diesel fuel blends made effects on operational properties of a high-pressure fuel pump of a common rail injection system. The two identical fuel injection systems mounted on a test bed of the fuel injection pumps were prepared for the experimental durability tests. The lubricity properties of ethanol-diesel fuel blends E10 and E20 blends were studied using a four-ball tribometer. The test results showed that long-term (about 100 hours) using of ethanol-diesel blends produced a negative effect on the durability of the high-pressure fuel pump. Due to the wear of plunger-barrel units the decrease in the fuel delivery rate occurred of about 39% after the 100 h of continuous operation with ethanol-diesel fuel blends. The average friction coefficients of ethanol-diesel fuel blend E10 was lower than that of the normal diesel fuel. After the 100 hours of operation with ethanoldiesel fuel blend E10, the measured wear scar diameter was 10% higher than that of a fossil diesel fuel.