Nowa wersja platformy, zawierająca wyłącznie zasoby pełnotekstowe, jest już dostępna.
Przejdź na https://bibliotekanauki.pl
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 15

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
1
Content available POLISH REPORT ON STRIKES
100%
EN
The purpose of this report is to explain is to present collective labour law in the broad political, economic, social and legal context. Although this analysis deals with strikes in Poland between the Great Wars, socialist Poland and the current third Polish Republic this study tries to explain an importance of statutory regulations of the right to strike as well as the right to organize strikes both in the capitalist system (1918-1939), at the beginning of the last decade of social Poland (1981-1989) and after the both political and economic changes had been introduced (since June 1989 until now). The Author must admit, though, he did not try to identify labour law as a political subject rather than a really legal one. He was under the obligation imposed by the German-Israeli leading team of the world wide research network to provide the most comprehensive respondes to the questions posed.
PL
Celem tego raportu jest prezentacja współczesnego zbiorowego prawa pracy w szerokim kontekście politycznym, gospodarczym, społecznym i prawnym. Chociaż autor analizuje sytuację „strajkową” w Polsce w dwudziestoleciu międzywojennym, w Polsce „ludowej”, jak również po roku 1989, jest to przede wszystkim studium na temat strajków przedstawia rolę i znaczenie ustawodawstwa dotyczącego prawa do strajku i prawa do organizowania strajków w systemie kapitalistycznym w Polsce, w początkach ostatniej dekady socjalizmu, jak również po dokonaniu zmian ustrojowych i gospodarczych w czerwcu 1989 r. Autor musi jednak zaznaczyć, iż nie próbował identyfikować zbiorowego prawa pracy jako dyscypliny z dziedziny nauk politycznych, a nie prawa. Był natomiast zobowiązany do udzielenia odpowiedzi na pytania postawione przez niemiecko-izraelskie kierownictwo grupy badawczej, w której uczestniczył.
PL
Autor przedstawia prawne dysproporcje między przepisami Kodeksu pracy (art. 2  i 22) i Traktatu o funkcjonowaniu Unii Europejskiej (art. 45, dawny art. 39 TWE). Tytuł VII Traktatu gwarantuje swobodę przepływu wewnątrz Unii Europejskiej osób, usług i kapitału, natomiast art. 45 TfUE wymienia wyłącznie pracowników w ramach szeroko pojętej kategorii osób aktywnych zawodowo w państwach członkowskich UE. Podstawową tezą sformułowaną w artykule jest objęcie zakresem swobody przemieszczania się osób zatrudnionych na podstawie cywilnoprawnych umów o świadczenie usług, formalnie niemających w świetle przepisów polskiego prawa pracy statusu prawnego pracowników. Zamierzeniem autora jest prewencyjne uniemożliwienie możliwości ograniczenia swobody przemieszczania się wewnątrz Unii Europejskiej osób zawodowo aktywnych, pozostających w zatrudnieniu nie-pracowniczym (cywilnoprawnym). Z tego względu autor proponuje w tekstach właściwych przepisów prawa (polskich i unijnych) zastąpienie terminu „pracownik” określeniem „zatrudniony”, obejmującym osoby świadczące pracę na podstawie przepisów Kodeksu cywilnego.
EN
Author is presenting legal discrepancies between provisions of Polish Labour Code (art.2 and 22) and Treaty for Functioning of the EU (art.45, former art. 39). Title VII of UE Treaty guarantees freedom of movement of individuals, services and capital but art.45 of the above mentioned Treaty lists only employees among broader category of professionally active population of EU Member States which ought to enjoy freedom of movement. therefore, an article published is inspired by the risk which might be created by a national ultra legalistic method of argumentation according to which only individuals defined by the national legislator as an employees may enjoy freedom of movement within EU. In order to prevent such possibility an Author proposes to substitute in both legal texts (Labour Code and Treaty) an oficial definition of an employee by the broader legal term of “labour” which covers also an individuals employed on legal grounds regulated by the Civil Code.
3
Content available THE RIGHT TO STRIKE IN HEALTH SERVICE
100%
EN
The author presents a specific situation of the right to strike by health care professionals. The Act of 23.5.1991 on the resolution of collective disputes prohibits the right to strike because of the need to protect the human life. In the absence of the above threat, this law limits the power to strike by doctors, nurses and medical personnel, although the ILO and Council of Europe standards of collective labor law guarantee medical personnel the right to defend their economic interests. In order to adapt the Polish law to international standards, the author presents the concept of virtual strike, which is not subject to legal restrictions. According to this concept, the decision to strike would not result in the striking medical staff ceasing to perform work and would not be associated with the loss of the right to remuneration for ongoing work.
PL
Autor przedstawia specyficzną sytuację prawa do strajku pracowników służby zdrowia. Ustawa z 23.5.1991 r. o rozwiązywaniu sporów zbiorowych zakazuje prawa do strajku ze względu na konieczność ochrony życia człowieka. W przypadku braku powyższego zagrożenia ustawa ta ogranicza uprawnienia do strajkowania lekarzy, pielęgniarek i medycznego personelu, mimo iż standardy zbiorowego prawa pracy MOP i Rady Europy gwarantują personelowi medycznemu prawo do obrony interesów ekonomicznych. W celu dostosowania polskiego prawa do standardów międzynarodowych autor przedstawia koncepcję strajku wirtualnego, nie podlegającą prawnym ograniczeniom. Według tej koncepcji decyzja o strajku nie powodowałaby zaprzestania wykonywania pracy przez strajkujący personel medyczny i nie byłaby związana z utratą prawa do wynagrodzenia za wykonywaną nadal pracę.
PL
Czwarta rewolucja przemysłowa (Przemysł 4.0) zaciera dotychczasową granicę między pracą świadczoną przez ludzi i maszyny, technologię, algorytmy, sztuczną inteligencję. Autor analizuje raport o przyszłości pracy opublikowany w 2018 r. przez Światowe Forum Gospodarcze. Stara się wykazać, że nowoczesna transformacja, zachodząca w obecnym pięcioleciu (lata 2018-2022), ma decydujące znaczenie dla budowy i rozwoju nowoczesnych stosunków zatrudnienia. Nowoczesna transformacja technologiczna, mądrze zarządzana, może doprowadzić do wzrostu wartości pracy człowieka. Problem tkwi w tym, iż wielu zatrudnionych obawia się, że maszyny, roboty, algorytmy, nowoczesne technologie, sztuczna inteligencja odbiorą ludziom pracę. Rzecz w tym, że jedynie poszczególne rodzaje prac mogą zostać zastąpione, z korzyścią dla społeczeństwa, maszynami. Natomiast wartość pracy jako takiej wzrośnie i będzie nadal wykonywana przez ludzi o wyższym poziomie kwalifikacji zawodowych.
EN
The fourth industrial revolution (Industry 4.0) dynamically shift the line between the work performed by humans and those performed by machines, technologies, algorithms and artificial intelligence. The author examines The Future of Jobs Report 2018 published by Centre for the New Economy Society of the World Economic Forum. He tries to argue that the current technological transformation in the next five years, 2018-2022, managed wisely may improved the quality and productivity of work performed by human employees. The problem is that many of employees afraid that robots, computers, modern technologies an AI will eliminate jobs performed by human beings. The Author argues that technology eliminates jobs, not work.
PL
Organy wymiaru sprawiedliwości Wlk. Brytanii orzekające w sprawach z zakresu pracy, w tym sąd apelacyjny dla Anglii i Walii (sprawa [2018] EWCA Civ 2748) orzekły, że kierowcy Ubera włączający aplikację umożliwiającą kontakt z firmą Uber zgłaszają gotowość do wykonywania pracy. Tym samym sądy brytyjskie zakwestionowały regulacje prawne obowiązujące w firmie Uber, według których kierowcy są osobami zatrudnionymi prowadzącymi działalność gospodarczą na własny rachunek. O zmienionej pozycji prawnej kierowców zatrudnionych przez firmę Uber zadecydowały ustalenia faktyczne, zgodnie z którymi Uber rekrutuje kierowców, kontroluje proces wykonywania pracy, wyznaczy im trasy poszczególnych kursów, ustala stawki wynagrodzenia, nakłada na kierowców określone obowiązki, zmienia warunki świadczenia usług, rozstrzyga sprawy sporne między kierowcami a klientami. Zatem nie najważniejsze jest w procesie świadczenia usług przez kierowców zatrudnionych przez Ubera przekazywanie informacji za pośrednictwem elektronicznych technologii. Wydając powyższy wyrok, sąd brytyjski rozwiązał podstawowy problem prawny, w jakiej roli występuje firma Uber w stosunkach prawnych nawiązanych z kierowcami. Uber został uznany za nowoczesny fenomen biznesowy. Bez względu na szczególną rolę, jaką ta firma odgrywa w przedsiębiorczości, Uber jest zobowiązany stosować się do standardów obowiązującego prawa pracy, według których praca człowieka nie jest ani towarem, ani elektroniczną technologią.
EN
The Employment Tribunals and England and Wales Court of Appeal accepted in the case [2018]EWCA Civ 2748 that any Uber driver who has the App switched on the territory in which he/she is authorized to work , and is able and willing to accept assignments is working for Uber under a worker contract. The UK courts had disregarded some provisions of the Uber’s Driver Agreement. They had been entitled to do so because the relevant provisions of the Driver Agreement did not reflect the reality of the bargain made between the parties. The fact that Uber interviews and recruit drivers, controls the key information, requires drivers to accept trips, sets the route, fixes the fare, imposes numerous conditions on drivers, determines wages, amends the driver’s terms unilaterally, and handles complaints by passengers makes him a transportation or passenger carrier, not an information and electronic technology provider. Therefore the UK courts solved the central issue of for whom (Uber), under contract with whom (Uber), drivers perform their services. Uber is a modern business phenomenon. Regardless of its special position in business Uber is oblige to follow the rules according to which the work is not a commodity neither online technology device.
EN
Carbon paste electrode (CPE) was modified with F-300 commercial activated carbon or Norit SX- 2 powdered activated carbon. CPEs were prepared for detection of 2,4-dichlorophenoxyacetic acid (2,4-D), 2,6-dichlorophenoxyacetic acid (2,6-D) and 2,4,6-trichlorophenoxyacetic acid (2,4,6-T). The electrochemical behavior of these materials was investigated employing cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The modifier was found to enhance the electroactive surface area and the peak current in comparison to the bare (unmodified) carbon paste electrode. The intensity of the signal increased with the increase in adsorption ability of the modifiers. Compared to the unmodified electrode, all the new paste electrodes showed a much greater sensitivity for detection of chlorinated phenoxyacetic acids in water samples.
EN
The usefulness of untreated (H-NM) as well as modified by sodium benzoate (H-SB) and sulfuric acid (H-SA1 and H-SA2) halloysites as low-cost adsorbent for the removal of Direct Orange 26 azo dye from aqueous solutions was investigated. The kinetic data were evaluated in terms of the pseudo-first order and pseudo-second order kinetic models, while the equilibrium adsorption data were analyzed by the Freundlich and Langmuir isotherm equations. The data follows the pseudo-second order kinetic and Langmuir adsorption models. The DO26 adsorption capacities were 64.93, 74.07, 303.0, and 384.4 μmol/g for the H-NM, H-SB, H-SA1, and H-SA2, respectively. Adsorption of the dye was strongly pH dependent; no effect of ionic strength was observed. The study revealed that halloysites, especially acid-activated halloysites, could be used as an effective and low-cost adsorbents.
PL
Haloizyt modyfikowany organicznymi związkami zawierającymi azot, wykorzystywany jako napełniacz polimerów, zastosowano do adsorpcji jonów Cu(II) z roztworu wodnego. Stwierdzono korelację ilości zaadsorbowanych jonów miedzi i ilości azotu związanego z powierzchnią haloizytu. Zwiększenie zawartości azotu na powierzchni haloizytu powodowało istotne zwiększenie zdolności adsorpcyjnej materiału w odniesieniu do jonów Cu(II).
EN
The halloysite modified with nitrogen-containing organic compounds (used as a polymers filler) was used to adsorb Cu(II) ions from an aqueous solution. A correlation was found between the amount of adsorbed copper ions and the amount of nitrogen bound to the halloysite surface. Increasing of the nitrogen content significantly increased the adsorption capacity of the material in relation to Cu(II).
EN
The aim of the study was to assess the possibility of using natural carbonaceous materials such as peat, lignite, and hard coal as low-cost sorbents for the removal of Direct Orange 26 azo dye from an aqueous solution. The adsorption kinetics and the influence of experimental conditions were investigated. The following materials were used in the research: azo dye Direct Orange 26, Spill-Sorb “Fison” peat (Alberta, Canada), lignite (Bełchatów, Poland), and hard coal (“Zofiówka” mine, Poland). The morphology and porous structure of the absorbents were tested. Dye sorption was carried out under static conditions, with different doses of sorbents, pH of the solution, and ionic strength. It was observed that the adsorption of Direct Orange 26 dye on all three adsorbents was strongly dependent on the pH of the solution, while the ionic strength of the solution did not affect the adsorption efficiency. The adsorption kinetics were consistent with the pseudo-second-order reaction model. The stage which determines the rate of adsorption is the diffusion of the dye in the near-surface layer. The process of equilibrium adsorption of Direct Orange 26 dye on all tested adsorbents is best described by the Langmuir isotherm. The maximum adsorption capacity for peat, brown coal and hard coal was 17.7, 15.1 and 13.8 mg/g, respectively. The results indicate that peat, lignite, and hard coal can be considered as alternative adsorbents for removing azo dyes from aqueous solutions.
PL
Celem pracy była ocena możliwości wykorzystania naturalnych materiałów węglowych takich jak torf, węgiel brunatny i węgiel kamienny jako niskokosztowych sorbentów do w usuwaniu barwnika azowego Direct Orange 26 z roztworu wodnego. Zbadano kinetykę adsorpcji oraz wpływ dawki sorbentu, pH roztworu oraz siły jonowej na skuteczność sorpcji. W badaniach wykorzystano barwnik azowy Direct Orange 26, torf Spill-Sorb „Fison” (Alberta, Kanada), węgiel brunatny (Bełchatów,Polska) oraz węgiel kamienny („Zofiówka”, Polska). Wykonano badania morfologii oraz struktury porowatej absorbentów. Sorpcję barwnika prowadzono w warunkach statycznych, przy różnych dawkach sorbentów, pH roztworu i sile jonowej. Zaobserwowano, że adsorpcja barwnika Direct Orange 26 na wszystkich trzech adsorbentach była silnie zależna od pH roztworu, natomiast siła jonowa roztworu nie wpływała na efektywność adsorpcji. Kinetyka adsorpcji była zgodna z modelem reakcji pseudo-drugiego rzędu. Etapem decydującym o szybkości adsorpcji jest dyfuzja barwnika w warstwie przypowierzchniowej. Proces adsorpcji równowagowej barwnika Direct Orange 26 na wszystkich badanych adsorbentach najlepiej opisuje izoterma Langmuira. Maksymalne zdolności adsorpcyjne dla torfu, węgla brunatnego i węgla kamiennego wynosiły odpowiednio 17,7, 15,1 i 13,8 mg/g. Wyniki wskazują, że torf, węgiel brunatny i węgiel kamienny mogą być rozważane jako alternatywne adsorbenty do usuwania barwników azowych z roztworów wodnych.
10
Content available remote Zastosowanie trocin jako tanich sorbentów do usuwania barwników azowych z wody
51%
PL
Zbadano adsorpcję barwników Direct Orange 26 (DO26) i Reactive Blue 81 (RB81) na trocinach dębu, sosny i wiśni. Kinetyka adsorpcji przebiegała zgodnie z modelem pseudo II rzędu. Adsorpcja w warunkach równowagowych była dobrze opisana równaniem izotermy Langmuira. Zbadano wpływ pH i siły jonowej roztworu na proces. Adsorpcja barwników zmniejszała się wraz ze zwiększeniem pH roztworu, a zwiększała wraz ze wzrostem siły jonowej roztworu. Uzyskane wyniki pokazały, że trociny mogą być z powodzeniem stosowane do usuwania barwników z roztworów wodnych.
EN
The com. azo dyes were adsorbed from their aq. solns. (20–100 μmol/L) on 3 types of sawdust (pine, oak and cherry wood) at 25°C under shaking to study the adsorption kinetics and equil. The kinetics was fitted well to the pseudo-second order model. The expt. isotherms were well described by the Langmuir equation. The effects of pH and ionic strength (0.1 mol/L NaCl) of soln. were studied. The adsorption of the dyes decreased with an increase of pH (2.5–11) and increased with the increase of the soln. ionic strength.
11
51%
EN
The paper examines single- and multicomponent adsorption onto granular activated carbon. The quantities adsorbed in the study were determined using HPLC with UV detection. The experimental data were analysed using the Langmuir, the Freundlich and the Sips adsorption isotherms. With a single component being adsorbed, high coefficients of determination and low mean square errors indicated that the Sips isotherm fitted the adsorption equilibrium well. Further experiments were carried out using aqueous solutions containing two or three adsorbed components in different proportions. For these solutions, the literature methods of predicting multicomponent equilibrium using single-component data did not yield positive results. Assuming that in the investigated range of concentrations no competitive adsorption occurred, the authors propose a method for calculating the equilibrium concentrations in the liquid phase using the equations obtained for individual components. The results achieved correspond very well to the experimental data.
12
Content available remote Adsorpcja kwasów fenoksyoctowych na pylistych węglach aktywnych
51%
PL
Zbadano adsorpcję kwasu fenoksyoctowego (PAA) i jego pochodnych: kwasów 2,4-dichlorofenoksyoctowego (2,4-D) i 2-metylo-4-chlorofenoksyoctowego (MCPA) na dwóch pylistych węglach aktywnych Norit SX2 i Ceca L2S. Kinetyka adsorpcji przebiegała zgodnie z modelem pseudo 2. rzędu. Adsorpcja w warunkach równowagowych była dobrze opisana równaniem izotermy Langmuira i Freundlicha. Zbadano również wpływ pH i siły jonowej roztworu na adsorpcję. Adsorpcja kwasów fenoksyoctowych zmniejszała się wraz ze wzrostem pH roztworu i zwiększała się wraz ze wzrostem siły jonowej roztworu.
EN
PhOCH₂COOH and its derivatives, 2,4-dichlorophenoxyacetic acid and 4-chloro-2-methylphenoxyacetic acid were adsorbed from their aq. solns. (0.2–1.0 mmol/L) on 2 com. powdered activated C at 25°C to study the adsorption kinetics and equils. The kinetics was fitted well to the pseudo-second order model. The adsorption at equil. was well described by the Langmuir-Freundlich equation. The effects of soln. pH and ionic strength were studied. The adsorption decreased as the initial soln. pH increased and increased as the soln. ionic strength increased.
EN
This paper aims to show the effect of activation method of tyre pyrolysis char (TPC) on adsorptionof bisphenol A (BPA) from aqueous solutions. The TPC was produced from end-of-life-tyres (ELT)feedstock in a pilot plant at 773 K. Activation was accomplished using two classical methods: physicalactivation with CO2and chemical activation with KOH. The two produced adsorbents had pores rangingfrom micro- to macropores. Distinct differences in the BET surface areas and pore volumes betweenthe adsorbents were displayed showing better performance of the chemically activated adsorbent foradsorption of BPA from water.The results of the kinetic studies showed that the adsorption of BPA followed pseudo-second-orderkinetic model. The Freundlich, Langmuir, Langmuir–Freundlich and Redlich–Peterson isotherm equa-tions were used for description of the adsorption data. The Langmuir–Freundlich isotherm model bestfits the experimental data for the BPA adsorption on both adsorbents. The Langmuir–Freundlichmonolayer adsorption capacity,qmLF, obtained for the CO2-activated tyre pyrolysis char (AP-CO2)and KOH-activated tyre pyrolysis char (AP-KOH) were 0.473 and 0.969 mmol g
EN
Three activated chars obtained from end-of-life tyre pyrolysis differing in activation time (AC110 – 110 min, AC130 – 130 min, and AC150 – 150 min) were successfully used as adsorbents for the removal of model dye – Rhodamine B (RhB) from aqueous solutions. The effects of solution pH, adsorption kinetics, and equilibrium adsorption were investigated. The results showed that the adsorption was strongly pH-dependent; the highest percentage of RhB dye adsorbed was obtained at pH 2.0 and the removal efficiency decreased with an increase in solution pH. Adsorption kinetics was analyzed using pseudo-first-order, pseudo-second-order, Weber-Morris, and Boyd kinetic models. It was found that the pseudo-second-order kinetic equation was the most appropriate for describing the adsorption kinetics and that the RhB adsorption process was controlled by a film diffusion mechanism. Adsorption equilibrium data were fitted to the Langmuir, Freundlich, Temkin, and Elovich isotherm models. The equilibrium data were best represented by the Langmuir model with the monolayer adsorption capacities of 69.96, 94.34, and 133.3 μmol/g for AC110, AC130, and AC150, respectively. It was concluded that the adsorption of RhB was closely correlated with the specific surface area (and activation time) of the activated chars.
PL
Przedstawiono wyniki badań nad możliwością wykorzystania aktywowanych pirolizatów ze zużytych opon do adsorpcji z wody modelowych herbicydów: kwasu 2,4-dichlorofenoksyoctowego (2,4-D), kwasu 2-metylo-4-chlorofenoksyoctowego (MCPA) oraz kwasu 2-metylo-4-chlorofenoksypropionowego (MCPP, Mecoprop). Adsorbenty otrzymano w wyniku aktywacji pirolizatów w atmosferze CO₂ w temp. 1100°C, stosując różne czasy procesu. Wielkość adsorpcji wszystkich badanych adsorbatów była skorelowana z czasem aktywacji i stopniem rozwinięcia struktury porowatej adsorbentu. Najlepszy z adsorbentów (135 min long aktywacji) miał powierzchnię BET równą 255 m²/g i całkowitą objętość porów równą 0,447 cm³/g. Dla wszystkich adsorbentów i adsorbatów adsorpcja najefektywniej przebiegała przy pH 2-3. Z testowanych trzech modeli izoterm adsorpcji: Freundlicha, Langmuira i Sipsa najlepszą zgodność danych doświadczalnych i modelowych uzyskano dla równania Sipsa. Aktywowane pirolizaty są skutecznymi i jednocześnie obiecującymi adsorbentami do usuwania herbicydów z wody. Zwiększenie ich pojemności adsorpcyjnej jest potencjalnie możliwe wraz z większym rozwinięciem powierzchni właściwej za pomocą aktywacji chemicznej.
EN
Three tire pyrolysis chars were activated in a CO₂ atm. at 1100oC and used as adsorbents for removal 2,4-dichlorophenoxyacetic acid, 2-methyl-4-chlorophenoxyacetic acid and 2-methyl-4-chlorophenoxypropionic acid from their aq. solns. The amt. of adsorbed acids was correlated with the activation time and the degree of adsorbent surface development. The best adsorbent had a sp. surface area of 255 m²/g and a total pore volume of 0.447 cm³/g after 135 min long activation. The best adsorption efficiency was achieved at pH 2-3. The best compatibility of exptl. and model data was obtained for the Sips model.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.