The surface coating processing technique was used to modify hydrothermally synthesized- Ba(Ti,Zr)O3 (BTZ) with an Nb-organic compound and Zn-organic compound in an organometallic precursor (Nb-EDTA and Zn-EDTA), which were coated on the powders uniformly. The sintering temperature was decreased and dense ceramics were obtained with well-developed grain growth at 1300 °C. Both increasing the amount of Nb–Zn and decreasing the Nb/Zn ratio greatly promoted grain growth. On increasing the Nb/Zn ratio, the Curie point temperature was markedly lowered, accompanied by a large decrease in the corresponding dielectric maximum and a simultaneous enhancement of the ferroelectric relaxor characteristic. At Nb/Zn = 2, the Curie temperature was monotonously lowered with increasing Nb–Zn content. The shift rate of the phase transition point of Nb–Zn co-doped BTZ was 6.5 °C/mol %. The corresponding dielectric maximum was enhanced rapidly from 9020 for a 0.35 mol % Nb–Zn doped sample to more than 12000 for a 0.90 mol % Nb–Zn doped sample.
Sulphates occur in waters mainly as a simple anion (SO)42-. In waters with high sulphate concentration also ion associate anions with some cation occurrence is possible. Together with bicarbonates and chlorides they form a major part of anions in natural waters. In common groundwaters and surface waters sulphate content ranges in tens to hundreds of milligrams/liter. Particularly rich in sulphates are some mineral waters. The article describes options of desulphurisation of real mine water. After the stage of aluminium compound using in previous research we examined using of barium compounds, namely BaCO3 and Ba(OH)2. After application of these compounds on an artificial model solution we focused on the real mine water from a flooded mine Smolník. The tests were conducted at various values pH, at 12, 8, 4.5 with pre-treated real water and at pH 3.9 with untreated real water. From the results it can be concluded that there was high efficiency of desulphurisation at all levels of pH. In terms of the selection of a particular compound barium hydroxide Ba(OH)2 was confirmed as the best.
PL
Siarczany występują w wodach głównie jako anion (SO)42-. W wodach o wysokim stężeniu siarczanów możliwe jest również występowanie anionowych wiązań jonowych z pewną liczbą kationów. Wraz z wodorowęglanami i chlorkami stanowią one znaczną część anionów w wodach. W wodach gruntowych i wodach powierzchniowych zawartość siarczanów wynosi od dziesiątek do setek miligramów na litr. Szczególnie bogate w siarczany są niektóre wody mineralne. W artykule przedstawiono opcje odsiarczania wody kopalnianej. Zbadano możliwości wykorzystania związków baru, mianowicie BaCO3 i Ba (OH)2. Przeprowadzono badania na próbkach wzorcowych i próbkach rzeczywistych - wodzie kopalnianej z zatopionej kopalni Smolník. Testy prowadzono przy różnych wartościach pH = 12; 8; 4,5 za pomocą wody o pH naturalnym i przy pH 3,9. Na podstawie wyników można stwierdzić, że na wszystkich poziomach pH uzyskano wysoką skuteczność odsiarczania. Najlepsze wyniki uzyskano dla wodorotlenek baru Ba (OH)2.
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.