Wyniki wyszukiwania - Biblioteka Nauki

Nowa wersja platformy, zawierająca wyłącznie zasoby pełnotekstowe, jest już dostępna.
Przejdź na https://bibliotekanauki.pl

Ograniczanie wyników

Znaleziono wyników: 3

Liczba wyników na stronie

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych: ultimate strength

Sortuj według:

Ogranicz wyniki do:

Experimental and numerical investigations of ultimate strength of imperfect stiffened plates of different slenderness

100%

Woloszyk K. , Garbatov Y. , Kowalski J. , Samson L.

tom nr 4

120--129

The objective of this study is to analyse the behaviour of compressed stiffened plates of different slenderness using experimental and numerical methods. The presented results are part of a long-term project to investigate the ultimate strength of geometrically imperfect structures subjected to different degradation phenomena, including corrosion degradation and locked cracks. Several specimens were subjected to a uniaxial compressive force, and the most important quantities related to the structural behaviour were captured and analysed. A finite element model, accounting for material and geometrical nonlinearities and initial geometrical imperfections, was developed using the commercial software ANSYS. The residual welding-induced stresses were measured in the middle cross-section for two specimens. The initial imperfection was identified by employing a close-range photogrammetry approach. It was concluded that the numerical analyses, based on the finite element model, predict the ultimate strength of stiffened plates accurately, although some deviations were also observed. The detailed analysis with the indication of possible uncertainty is presented, and several conclusions are derived.

Ultimate compressive strength assessment of uncleaned and cleaned corroded plates with locked crack

75%

Woloszyk K. , Garbatov Y.

tom nr 3

117--127

The work presented here investigates the structural response of cleaned corroded plates, subjected to compressive load in the presence of a locked crack, where the change of mechanical properties as a result of corrosion development and the cleaning process is also accounted for. A Finite Element model for assessing the compressive strength, considering geometric and material nonlinearities, is developed, and the analysed plates are compared with the available experimental data. An experimental design plan is generated using the Design of Experiments techniques, which quantifies the influence of the governing variables and their interactions with respect to the plate’s ultimate compressive strength. With a limited number of observations, the most significant effects are identified. The corrosion degradation is revealed to be the most crucial effect leading to an effective strength reduction. It was found that, in the case of a corroded plate with a locked crack subjected to a compressive load, the most severe case is when the crack is transversely oriented. The strength reduction is slightly lower than when the corrosion degradation and the presence of a crack are considered to be a simple summation of these two effects but acting separately. The outcome of the analysis is the development of several empirical formulations that allow a fast estimation of the ultimate strength of a corroded plate, subjected to compressive load in the presence of a locked crack, accounting for different cleaning.

Study of the behavior of the Al 2017-A aluminium plate corroded and with horizontal cracks treated by the technique of composite materials

51%

Berrahou M. , Benzineb H.

tom Vol. 23, nr 2(76)

5--24

This work presents a comprehensive study consisting of two aspects: a numerical analytical aspect and a laboratory experimental aspect. The numerical study was a three-dimensional finite element numerical analysis of performance of corroded and horizontally cracked aluminium plates, which were repaired by composite patching. The effect of the composite types on the variance of the damaged area of the adhesive (FM-73) and their efficiency on the stress intensity factor were studied. In the experimental study, corroded aluminium plates were prepared and repaired them using technology of the composite. The results showed that the panels that were repaired with composite (boron/epoxy) give values of stress intensity factor (KI) and damaged area ratio (DR) less than the other two studied composites (glass/epoxy and graphite/epoxy), and increase the ultimate strength of plates damage, and this leads to the conclusion that (Boron/epoxy) increases the performance and durability of (Al 2017-A) plates.