Wyniki wyszukiwania - Biblioteka Nauki

1

AHSS steel welding with micro-jet cooling in mobile platforms

100%

Węgrzyn T. , Szczucka-Lasota B. , Piwnik J. , Jurek A.

|

tom T. 15, z. 1

131--139

EN

This paper focuses on the weldability of advanced high-strength steels (AHSS), commonly used by the automotive industry and civil engineering. These steels have found application in the construction of mobile platforms mounted on vehicles. AHSS significantly outperform other materials when it comes to performance flexibility and mass reduction potential. This article verifies whether the application of micro-jet cooling technology during the welding process might help to overcome these issues. The aim of this article is to choose welding parameters in the process with micro-jet cooling to obtain the best mechanical properties of the welded structure (elongation). The best welding parameters for these difficult-to-weld constructions are presented in detail.

2

Welding of DOCOL 1200M using micro-jet cooling

100%

Silva A. , Szczucka-Lasota B. , Węgrzyn T. , Jurek A.

|

2020

|

tom R. 92, nr 1

25--29

EN

In welding elements of the supporting structure of the means of transport, attention is paid to the high strength and good plastic properties of the welded joint. In the construction of transport means, DOCOL 1200M steel from the AHSS group is increasingly used due to their high tensile strength of steel at the level of 1200 MPa. The welds have much lower strength than the native material. In this paper, it was decided to check the weldability of DOCOL 1200M steel with the use of micro-jet cooling. A positive effect of micro-jet cooling on the mechanical properties of joints made on DOCOL 1200M steel was observed. A positive effect of micro-jet cooling on the mechanical properties of welded joints made of DOCOL 1200M steel has been observed.

PL

Przy spawaniu elementów konstrukcji nośnej środków transportu zwraca się uwagę na wysoką wytrzymałość i dobre własności plastyczne złącza spawanego. W budowie środków transportu coraz częściej stosuje się stal DOCOL 1200Mz grupy AHSS z uwagi na jej dużą wytrzymałość na rozciąganie na poziomie 1200 MPa. Złącza posiadają dużo niższą wytrzymałość od materiału rodzimego. W niniejszym artykule postanowiono sprawdzić spawalność stali DOCOL 1200Mz wykorzystaniem chłodzenia micro-jetowego. Zaobserwowano pozytywny wpływ chłodzenia mikro-jetowego na właściwości mechaniczne złączy spawanych wykonanych na stali DOCOL 1200M.

3

Mixed welding of the mobile construction platform in the automotive industry

100%

Węgrzyn T. , Szczucka-Lasota B. , Piwnik J. , Jurek A. , Wilczyński K. I.

|

tom T. 16, z. 1

29--38

EN

This paper examines the possibility to improve mixed weldability of pins to mobile platforms. There is an increasing demand for mixed joints made of hard-weldable steel used in civil engineering and the automotive industry. A good example of this is welding of movable platform elements such as a pin to arm joints. The pin is very often made of yield structural steel S690 QL (1.8928), while the arm of the movable platform is mainly made of DOCOL 1400M steel from the AHSS group (advanced high-strength steel). This kind of joint is not easy to manufacture due to the different chemical compositions and thicknesses of both grades of steel. The difference in the thickness of welded elements creates an additional difficulty. The main aim of this article is to determine the most appropriate welding parameters and select additional materials to obtain the correct joint with good mechanical properties, free from welding defects and incompatibilities. This article examines whether the application of micro-jet cooling technology during the welding process might help to overcome these issues. For the first time, micro-jet cooling was not used to weld these grades of steel. The welding parameters and the micro-jet cooling parameters were investigated.

4

Spawanie MIG cienkościennych konstrukcji środków transportu ze stali DOCOL 1200M

100%

Szczucka-Lasota B. , Węgrzyn T. , Piwnik J. , Jurek A. , Wilczyński K. I.

|

2019

|

tom T. 24, nr 4

250--257

PL

Ważnym materiałem stosowanym w budowie środków transportu są stale z grupy AHSS (AHSS – Advanced High-Strength Steel) z uwagi na ich wysoką granicę plastyczności na poziomie 900 MPa. Złącza z tych stali są trudnospawalne i nie gwarantują porównywalnych własności mechanicznych. Celem prac przedstawionych w artykule jest dobór parametrów do spawania cienkościennych konstrukcji ze stali AHSS na przykładzie stali DOCOL 1200M. Postanowiono sprawdzić wpływ parametrów spawania na poprawność wykonanego złącza.

EN

Recently, more and more often used material in the construction of means of transport are steels from the AHSS group (AHSS – Advanced High-Strength Steel) due to their high yield strength of 900 MPa. The joints of these steels are difficult to weld and can to guarantee good plastic properties. The purpose of the article is to choose the parameters for welding thin structures made of AHSS steel on the example of DOCOL 1200M steel. It was decided to check the welding parameters on the correctness of the joint made.

5

Welding mobile platforms elements made of AHSS steel in view of new requirements in civil engineering and transport

80%

Węgrzyn T. , Jurek A. , Wszołek Ł. , Stanik Z.

|

2019

|

tom z. 103

209--218

EN

The developing automotive industry has prompted an increase in the demand for new welding technologies in civil engineering and transport that reduce the mass of mobile platforms mounted on vehicles and increase their operational range at the same time. The AHSS steels are the materials most commonly adapted for the production of motor vehicles due to their high tensile strength. Nonetheless, the joints created with their use are less strong from the native material. This article examined whether the application of micro-jet cooling would alter the mechanical properties of the welds. Based on the performed tests, joints with better quality that passed positively in the hardness and tensile strength evaluations were obtained. The presented research proves that the use of additional elements in the welding process significantly affects the quality of the obtained welds and brings satisfactory results with a greater repeatability than before.