Wyniki wyszukiwania - Biblioteka Nauki

Ten serwis zostanie wyłączony 2025-02-11.

Nowa wersja platformy, zawierająca wyłącznie zasoby pełnotekstowe, jest już dostępna.
Przejdź na https://bibliotekanauki.pl

Ograniczanie wyników

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych: sleeves

Sortuj według:

Ogranicz wyniki do:

A geometrical surface texture study of sliding sleeves and pins after bench tests

100%

Olejarczyk K. , Wikło M.

tom Vol. 24, No. 4

art. no. 2023412

Objectives was to determine the durability of pins and sleeves used in the construction of a cycloidal gear. The methods used were based on a comparative analysis of selected macro photos of their surfaces and representative surface profiles recorded before and after the bench tests and the Ra and Rz surface roughness values determined on their basis. Before and after the bench tests, the weight of each sleeve and pin was measured, their surface profiles were recorded and micro photos of these surfaces were taken. Based on each recorded surface profile, the roughness parameters Ra and Rz were determined. The advantages of using steel sleeves in the cycloidal drive structure, increasing its durability, have been demonstrated by the low mass wear of the sleeves and the low surface roughness parameters Ra and Rz. It was shown that the appropriate accuracy of the pins and sleeves is necessary.

Innovative Laboratory Procedure to Estimate Thermophysical Parameters of Iso-exo Sleeves

100%

Ignaszak Z. , Prunier J. B.

tom Vol. 17, iss. 1

67--72

The paper is focused on properties testing of materials used in form of iso-exo sleeves for risers in ferrous alloys foundry. They are grainy-fibrous materials, containing components which initiate and upkeep exothermic reaction. Thermo-physical parameters characterizing such sleeves are necessary also to fill in reliable databases for computer simulation of processes in the casting-mould layout. Studies with use of a liquid alloy, especially regarding different sleeves bring valuable results, but are also relatively expensive and require longer test preparation time. A simplified method of study in laboratory conditions was proposed, in a furnace heated to a temperature above ignition temperature of sleeve material (initiation of exothermic reaction). This method allows to determine the basic parameters of each new sleeve supplied to foundries and assures relatively quick evaluation of sleeve quality, by comparison with previous sleeve supplies or with sleeves brought by new providers.