Nowa wersja platformy, zawierająca wyłącznie zasoby pełnotekstowe, jest już dostępna.
Przejdź na https://bibliotekanauki.pl
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 30

Liczba wyników na stronie
first rewind previous Strona / 2 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  konstrukcja masywna
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 2 next fast forward last
PL
Scharakteryzowano parametry niezbędne do obliczania temperatur twardnienia betonu. Przedstawiono propozycje przyjmowania tych parametrów betonu twardniejącego. Wykazano, że przyjęcie różnych wartości parametrów termofizycznych może mieć istotne znaczenie w szacowaniu temperatur twardnienia konstrukcji masywnych.
EN
Necessary parameters for estimation of concrete hardening temperatures are characterized. Selection proposal of these parameters for hardening concrete is given. There is stated that acceptance of different thermophysical parameters can influence on hardening temperatures estimation in massive construction.
PL
Przedstawiono wyniki obliczeń określających temperatury twardnienia betonu w elementach masywnych. Analizowano wpływ warunków prowadzenia robót betonowych na rozkład temperatur w blokach betonowych o wymiarach 2x2x2m i 4x4x4m. Wykazano, że obniżenie temperatury początkowej betonu może być skuteczną metodą zmniejszenia różnicy temperatur pomiędzy wnętrzem masywu a jego powierzchnią.
EN
The results of numerical tests of temperature fields in mass concrete elements were presented. The influence of conditions of concreting was analyzed on the schedule of temperatures in concrete blocks about dimensions 2 x 2 x 2 m and 4 x 4 x 4 m. It was showed that the Iowering the initial temperature of concrete could be an effective method of decreasing the difference of temperatures between interior of the mass element and its surface.
PL
Podano numeryczny model betonu chłodzonego we wnętrzu konstrukcji masywnej. Ustalono wpływ i znaczenie czasu chłodzenia na wytężenie betonu twardniejącego w strefie oddziaływania oporów ograniczających swobodę jego odkształceń.
EN
Numerical model of concrete cooled insidic massive concrete construction is presented. Influence of cooling time on the strength of hardening concrete in area of restrictive strain is pointed out.
5
Content available remote Budowa betonowych masywów
88%
8
Content available remote The concept of the composition of self-compacting concrete with low hardening heat
75%
EN
This paper presents a proposal for shaping the properties of green self-compacting concrete, mostly focussing on minimising the amount of clinker in concrete and obtaining lower hardening temperatures. The main application of this SCC would be in constructions build during summer, as well as in massive and semimassive structures. In these kinds of constructions, thermal effects connected with cement hydration are of particular importance. The difference in temperature between the interior and the relatively fast cooling exterior of the concrete element leads to thermal stress. In extreme conditions, this can cause cracking within the entire bulk of concrete element, leading to a lowering of its durability and longevity.
PL
W artykule przedstawiono koncepcję doboru składników mieszanek betonów samozagęszczalnych o niskim cieple hydratacji. Takie mieszanki są wykorzystywane do realizacji konstrukcji masywnych, a także do realizacji prowadzonych w warunkach podwyższonych temperatur. W konstrukcjach masywnych, efekty cieplne związane z reakcją hydratacji mają szczególne znaczenie. Różnica temperatur pomiędzy wnętrzem a powierzchnią konstrukcji prowadzi do powstawania naprężeń termicznych. W ekstremalnych warunkach prowadzić to może do zarysowania konstrukcji w całej jej objętości. Prowadzi to do obniżenia trwałości konstrukcji, a w przypadku masywnych fundamentów obciążonych dynamicznie może je całkowicie dyskwalifikować.
PL
Wpracy zaprezentowano właściwości cementu wieloskładnikowego CEM V/A 32,5R-LH oraz pokazano możliwość wykorzystania go w budowie obiektów masywnych. Przykładem realizacji było wykonanie fundamentu pod młyn cementu w Cementowni Górażdże.
EN
Hereby paper describes the properties of composite cement CEM V/A 32,5R-LH and demonstrates its application possibilities inmassive object constructions. The exemplary application was executed in the construction of the foundations of the cement mill of Górażdże Cement Plant.
11
Content available remote Roboty betonowe w obiektach monumentalnych
75%
PL
W artykule przedstawiono cechy wyróżniające budowanie betonowych konstrukcji masywnych, charakterystycznych dla obiektów monumentalnych i sakralnych, od budowania zwykłej konstrukcji. Przedstawiono dwa bardzo ważne procesy robót betonowych: -transport mieszanki betonowej - w przedstawionym modelu uwzględniono rzeczy-wisty, losowy czas trwania poszczególnych operacji, podano przykłady dwóch wariantów procesów, -pielęgnację betonu - przedstawiono zagadnienie towarzyszące procesowi dojrzewania betonu w konstrukcjach masywnych oraz przedstawiono metody pielęgnacji świeżego betonu.
EN
The paper presents the features distinguishing construction of massive concrete structures typical for sacral and monumental objects from construction of ordinary structures. Very important processes of concrete works are described: -transportation of concrete mixture - the real, random duration of particular opera-tions is regarded in the presented model, the examples of two options of process or-ganization are given, -curing of concrete - the problems assisting the hydration process in massive struc-tures are discussed and the methods of curing of fresh concrete are presented.
PL
Przedstawiono wyniki własnych badań warunków wiązania i twardnienia betonu wysokowartościowego we wnętrzu konstrukcji masywnych. Stwierdzono znaczenie skurczu samoczynnego, który łącznie ze zmianami temperatury, powoduje szybkie zmiany stanu naprężenia i wczesne pękanie betonu.
EN
In this paper are presented results from own experiments on concrete binding and hardening condition inside massive construction. It was found, the significance of autogenous shrinkage, which together with the change of temperature cause rapid changes of stress state and early concrete cracking.
PL
Podano uwagi praktyczne dotyczące technologii betonowania i pielęgnacji konstrukcji masywnych oraz problemów związanych z ciepłem hydratacji cementu. Zagadnienie to omówiono na przykładzie fundamentów o kubaturze od 150 do 7400 m3.
EN
Practical remarks concerning concreting technology and curing of massive concrete foundation as well as problems connected with heat of cement hydratation are produced. The problem discussed, is illustrated by concrete foundations with cubatures from 150 up to 7400 cu.m.
15
Content available remote Badania betonu w masywnej konstrukcji hydrotechnicznej
63%
PL
Artykuł opisuje kompleksowe badania betonu w konstrukcji jednej z największych elektrowni wodnych w Polsce. W ramach kompleksowej oceny obiektu wykonano szczegółowe badania właściwości fizykomechanicznych betonu i stali zbrojeniowej.
EN
Describes a comprehensive study concrete construction hydroelectric power. As part of comprehensive expertise on the entire property (construction materials) made a detailed study physico-mechanical properties of concrete and reinforcing steel.
16
Content available remote Praktyczne wskazówki w zakresie projektowania i wykonania betonu
63%
PL
W artykule przedstawiono koncepcję projektowania samozagęszczalnych betonów o niskim cieple hydratacji przeznaczonych do konstrukcji masywnych i konstrukcji wykonywanych w okresie podwyższonych temperatur. Przedstawiono przykładowe betony samozagęszczalne zaprojektowane wg tej koncepcji, wykazując, że charakteryzują się one właściwościami reologicznymi stabilnymi w czasie, niskim wydzielaniem ciepła oraz dobrymi właściwościami wytrzymałościowymi. Dzięki stosowaniu cementów o małej ilości klinkieru oraz dodatków mineralnych betony te spełniają warunki stawiane betonom niskoemisyjnym (betonom zielonym).
EN
The article presents the concept of self compacting concretes with low hydration heat which can be used for massive constructions and constructions erected in high temperatures. The paper demonstrates that self-compacting concretes designed in accordance with this concept are characterized by rheological properties that are stable over time, low heat production and, despite the small amount of clinker, good strength properties. They also meet the conditions for green concrete.
PL
W artykule przedstawiono zasady nadzoru nad jakością betonu i robót betonowych w realizacji elementów masywnych. Opisano główne zagrożenia w ich wykonawstwie, po czym wskazano działania konieczne do ich właściwego przygotowania. Zwrócono uwagę na prawidłową kontrolę dostaw betonu oraz pielęgnację w trakcie dojrzewania. W podsumowaniu zaproponowano model działania nadzoru w wykonawstwie konstrukcji wielkogabarytowych.
EN
The article presents the principles of supervision concrete and concrete works quality during execution of massive structures. The main threats to their execution were described, and then the activities necessary for their proper preparation were indicated. The attention was paid to the correct control of concrete supplies and curing of maturing concrete. Summing up, a model of supervision operation in the execution of large-size structures is proposed.
PL
Zagadnienia przedstawione w artykule dotyczą często obserwowanych w praktyce zarysowań i spękań konstrukcji betonowych, powstających już w fazie ich wznoszenia. Przyczyną tych zarysowań są przede wszystkim nierównomierne zmiany objętościowe twardniejącego betonu. Spowodowane są one wzrostem temperatury betonu wywołanym egzotermicznym procesem hydratacji cementu oraz wymianą wilgoci twardniejącego betonu z otoczeniem. W artykule opisano charakter oraz przyczyny występowania wczesnych rys i spękań w masywnych płytach fundamentowych oraz w ścianach żelbetowych. Przedstawiono również główne czynniki technologiczno-materiałowe wpływające na zwiększenie ryzyka zarysowania we wczesnym okresie dojrzewania betonu.
EN
The issues discussed in this article relate to a phenomenon frequently observed in practice – fractures and cracks in concrete structures occurring even at the construction stage. The principal reason for these cracks is uneven changes in volume in the hardening concrete. They are caused by an increase in the temperature of the concrete, resulting from an exothermic process of cement hydration and the exchange of moisture in the hardening concrete with the surroundings. The article describes the nature of and reasons for early fractures and cracks in large foundation slabs and in reinforced-concrete walls. It also presents the main technological and material-related factors affecting the risk of cracks appearing at an early stage in concrete curing.
first rewind previous Strona / 2 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.