Wyniki wyszukiwania - Biblioteka Nauki

Nowa wersja platformy, zawierająca wyłącznie zasoby pełnotekstowe, jest już dostępna.
Przejdź na https://bibliotekanauki.pl

Ograniczanie wyników

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych: filler ratio

Sortuj według:

Ogranicz wyniki do:

Forecasting process parameters on weld nugget hardness of filler added friction stir welded dissimilar aluminium alloys 5052 and 6082 joints

100%

Sasikumar A. , Gopi S. , Mohan D. G.

Journal of Mechanical and Energy Engineering

2021

tom Vol. 5, No 2

103--112

This article deals with the optimization of friction stir welding process parameters with filler ratios on dissimilar Aluminium alloy groups. For this purpose, 6 series Aluminium alloy 6082 and 5 series Aluminium alloy 5052 were taken. Microhardness property was conducted under various rotational speeds, welding speed, plunge depth, Center distance between the holes and filler mixing ratio. The Central Composite Design (CCD), the most commonly used Response Surface Methodology (RSM), is considered to develop the prediction equation. A validation analysis is carried out, and the results were compared with the relative impact of input parameters on weld nugget microhardness. It is observed that the increase in welding speed with plunge depth and filler ratio result in the increase of weld nugget microhardness up to a maximum value. The maximum weld nugget hardness of fabricated joint was obtained with the welding process parameters combination of 1000 rpm rotational speed, 125 mm/min welding speed, 0.15 mm plunge depth, 2 mm centre distance between the holes, and filler ratio of 95% Mg and 5% Cr.

Prediction of filler added friction stir welding parameters for improving corrosion resistance of dissimilar aluminium alloys 5052 and 6082 joints

80%

Sasikumar A. , Gopi S. , Mohan D. G.

Advances in Materials Science

2022

tom Vol. 22, nr 3(73)

79--95

The aluminium alloys 5052 and 6082 are extensively used in manufacturing lighter structural members, having improved strength and resistance to corrosion. Magnesium (Mg) and Chromium (Cr) powder were the filler materials selected for enhanced corrosion protection properties in this investigation. Friction stir welding (FSW) process parameters viz., spindle speed, welding speed, shoulder penetration, the centre distance between the holes and filler ratio are used to forecast the minimum corrosion rate from different weld regions of AA5052-AA6082 dissimilar joints. Response surface methodology based on a central composite design was used to evolve the mathematical models and estimate dissimilar FSW joints’ corrosion rates. Response optimization shows that the minimum corrosion rate was achieved by the welding parameters of spindle speed 1000 rev/min, welding speed 125 mm/min, holes spacing of 2 mm and filler ratio 95% of Mg and 5% of Cr.